Introduction
The 2BOOM Aqua Jam Bluetooth Shower Speaker is designed for audio playback in wet environments. Its compact, water-resistant design and suction cup mounting allow for versatile placement. This manual provides instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your speaker.
Safety Information
- Do not submerge the speaker in water for extended periods. It is water-resistant, not fully waterproof.
- Keep the charging port dry before connecting the USB charging cable.
- Avoid extreme temperatures and direct sunlight.
- Do not attempt to disassemble or repair the speaker yourself. This may void the warranty and cause damage.
- Use only the provided USB charging cable.
Package Contents
Verify that all items are present in the package:
- Aqua Jam Bluetooth Shower Speaker (Pink)
- USB Charging Cable
- Instruction Manual (This document)
Image: The Aqua Jam Shower Speaker in its retail packaging, showing the front of the box with product features and branding.
Product Overview
The Aqua Jam speaker features a circular design with a central control panel and a suction cup on the back for mounting.
Image: A front view of the pink Aqua Jam Shower Speaker, highlighting the central control buttons and the speaker grille.
Components:
- Control Panel: Located on the front, includes Power, Play/Pause, Previous Track/Volume Down, Next Track/Volume Up buttons.
- Microphone: For call answering.
- Charging Port: DC:5V input, located on the side, protected by a rubber flap.
- Suction Cup: On the back for mounting to smooth surfaces.
Image: A side view of the pink Aqua Jam Shower Speaker, clearly showing the DC:5V charging port covered by a protective flap.
Setup
1. Charging the Speaker:
- Locate the DC:5V charging port on the side of the speaker and gently lift the protective rubber flap.
- Connect the small end of the provided USB charging cable to the speaker's charging port.
- Connect the larger end of the USB cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator will illuminate during charging. Once fully charged, the indicator may change color or turn off.
- After charging, ensure the rubber flap is securely closed to maintain water resistance.
2. Bluetooth Pairing:
- Press and hold the Power button (power symbol) on the speaker for a few seconds until you hear an audible prompt or the LED indicator flashes, indicating it's in pairing mode.
- On your Bluetooth-enabled device (smartphone, tablet, laptop), go to the Bluetooth settings.
- Search for available devices. The speaker will appear as "BT-290" or similar.
- Select the speaker from the list to initiate pairing.
- Once successfully paired, you will hear a confirmation tone, and the LED indicator will typically stop flashing and remain solid.
- The speaker will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.
Video: This video demonstrates the setup and basic operation of the shower speaker, including charging, Bluetooth pairing, and control functions.
Operating Instructions
Power On/Off:
- To power on, press and hold the Power button (power symbol) until the LED indicator lights up and you hear a tone.
- To power off, press and hold the Power button (power symbol) again until the LED indicator turns off and you hear a tone.
Music Playback:
- Play/Pause: Press the Play/Pause button (play/pause symbol) once to play or pause music.
- Next Track: Short press the Next Track button (double arrow right).
- Previous Track: Short press the Previous Track button (double arrow left).
- Volume Up: Long press the Volume Up button (double arrow right).
- Volume Down: Long press the Volume Down button (double arrow left).
Call Answering:
- When a call comes in, the speaker will ring. Press the Play/Pause button (play/pause symbol) once to answer the call.
- To end a call, press the Play/Pause button (play/pause symbol) once again.
- To reject an incoming call, press and hold the Play/Pause button (play/pause symbol) for a few seconds.
Mounting the Speaker:
The speaker features a suction cup for easy mounting on smooth, flat surfaces such as shower tiles or glass.
- Ensure the surface is clean and dry.
- Press the suction cup firmly against the desired surface.
- Verify that the speaker is securely attached before releasing it.
Image: The Aqua Jam Shower Speaker shown with water splashes, demonstrating its water-resistant capability for shower use.
Maintenance
- Cleaning: Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Drying: After use in wet environments, ensure the speaker, especially the charging port, is thoroughly dry before charging.
- Storage: Store the speaker in a cool, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair with Bluetooth device. | Speaker not in pairing mode; device too far; Bluetooth not enabled on device. | Ensure speaker is in pairing mode (flashing LED). Move device closer. Enable Bluetooth on your device. |
| No sound or low volume. | Volume too low on speaker or device; speaker not connected. | Increase volume on both speaker and connected device. Re-pair the speaker. |
| Suction cup not sticking. | Surface is dirty, wet, or not smooth. | Clean and dry the surface. Ensure it is smooth and non-porous. |
Specifications
| Feature | Detail |
|---|---|
| Model | BT290P |
| Brand | 2BOOM |
| Connectivity | Bluetooth |
| Water Resistance Level | Water Resistant (Showerproof) |
| Power Source | Battery Powered (1 Lithium Polymer battery required) |
| Speaker Size | 2.5 Inches |
| Control Method | Touch buttons |
| Product Dimensions | 2.5"D x 6.25"W x 6.5"H |
| Item Weight | 5.9 ounces |
| UPC | 724500658850 |
Warranty
This product comes with a limited warranty. Please refer to the warranty information provided with your purchase or contact 2BOOM customer support for details regarding warranty coverage and terms.
Support
For further assistance, technical support, or customer service inquiries, please visit the official 2BOOM website or contact their customer support team using the information provided on the product packaging or their website.
You can also visit the 2BOOM Store on Amazon for product information and updates.
