SONAX Rubber Protectant GummiPfleger 3401000 Instruction Manual

1. Product Overview

The SONAX Rubber Protectant (GummiPfleger) is designed to clean and refresh rubber components, maintaining their elasticity. It helps extend the life of rubber and restores original appearance. This product is suitable for various rubber parts, including door seals, tires, and floor mats.

• Provides maintenance, protection, and rejuvenation for rubber.

Image 1.1: Visual representation of the product's effect on rubber seals, demonstrating improved condition and extended lifespan.

Image 1.2: Key benefits of the product, including moisturizing, preventing sticking, prolonging rubber life, and suitability for winter conditions.

2. Safety Information

Always read the product label before use. Keep out of reach of children. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. Use in a well-ventilated area. Do not ingest.

3. Package Contents

• 1 x SONAX Rubber Protectant (GummiPfleger) 3.38 Fl Oz (100 ml) bottle with integrated sponge applicator.

Image 3.1: The SONAX Rubber Protectant product bottle.

4. Setup and Preparation

1. Ensure the rubber surface to be treated is clean and free from loose dirt or debris. If necessary, wash the area and allow it to dry completely before application.
2. Shake the bottle well before use to ensure the product is thoroughly mixed.

5. Operating Instructions

Follow these steps for effective application of the SONAX Rubber Protectant:

1. Apply to Sponge: Gently press the bottle onto the rubber surface to dispense the product onto the integrated sponge applicator.
2. Even Application: Spread the product evenly over the rubber components using the sponge. Ensure complete coverage.
3. Allow to Absorb: Let the product absorb into the rubber for a few moments.
4. Wipe Excess: If desired, lightly wipe off any excess product with a clean, soft cloth after application.

Image 5.1: Step-by-step visual guide for applying the rubber protectant.

Image 5.2: Demonstrates the product being applied to hydrate and restore a rubber door seal.

6. Maintenance

For optimal protection and to maintain the elasticity and appearance of rubber components, reapply the SONAX Rubber Protectant periodically, especially before winter or after extensive cleaning.

7. Troubleshooting

• Uneven Application/Streaks: If the product appears uneven or leaves streaks, ensure the surface was clean and dry before application. Reapply a thin, even layer and wipe off any excess immediately with a clean cloth.
• Rubber Still Sticking: For severely dried or stiff rubber, multiple applications may be necessary. Ensure the product has fully absorbed into the rubber.
• Product Not Dispensing: Check if the sponge applicator is clogged. Gently clean the sponge with a damp cloth if needed. Ensure the bottle is squeezed firmly enough.

8. Specifications

9. Warranty and Support

For warranty information or product support, please refer to the official SONAX website or contact their customer service directly. Keep your purchase receipt for any warranty claims.