Introduction
This manual provides detailed instructions for the installation, use, and maintenance of your Citizen Eco-Drive AT8011-04E replacement leather watch strap. This strap is designed for specific Citizen Eco-Drive models, particularly the AT8011-04E, and features a black leather finish with contrasting stitching and a fold-over clasp.
Product Overview
The Citizen replacement leather strap (Part Number: Cit-26654-S52834) is crafted from genuine leather, featuring a black color with bright contrasting stitching. It is equipped with a silver-toned fold-over clasp that includes side push buttons and the Citizen logo. This strap is specifically compatible with Citizen Eco-Drive model AT8011-04E (Caliber H800) and case number 4-S088721.
Box Contents: One replacement watch strap. Please note: Spring bars are not included, and the watch itself is not part of this delivery.
Setup and Installation
To install your new Citizen watch strap, you will need a spring bar tool and the appropriate spring bars (not included). Ensure you have a clean, well-lit workspace to prevent damage to your watch or strap.
- Remove the Old Strap: If replacing an existing strap, use a spring bar tool to compress the spring bars holding the old strap to the watch lugs. Carefully remove the old strap.
- Prepare the New Strap: Identify the two halves of the new strap. The longer part typically attaches to the 12 o'clock side of the watch, and the shorter part with the clasp attaches to the 6 o'clock side.
- Insert Spring Bars: Insert a spring bar into the channels at each end of the new strap halves.
- Attach to Watch Lugs:
- Align one end of a spring bar with a lug hole on the watch case.
- Using the spring bar tool, compress the other end of the spring bar and guide it into the corresponding lug hole.
- Gently tug on the strap to ensure it is securely seated and the spring bars are properly engaged in the lug holes.
- Repeat for the other strap half.
- Check Security: Once both halves are attached, gently pull on the strap to confirm it is firmly secured to the watch.
Image 1: Diagram illustrating how to measure watch strap dimensions and how the strap attaches to the watch lugs. This helps ensure correct fitment.
Image 2: The Citizen replacement leather watch strap with its fold-over clasp. The clasp is shown open, revealing the Citizen logo.
Operating the Clasp
This strap features a fold-over clasp with side push buttons for secure fastening and easy removal.
- To Close: Wrap the strap around your wrist. Insert the pin from one end of the strap into the desired hole on the other end. Fold the clasp over until it clicks securely into place.
- To Open: Press the two side push buttons simultaneously. The clasp will release, allowing you to remove the watch.
Maintenance and Care
To ensure the longevity and appearance of your leather watch strap, follow these care guidelines:
- Avoid Water: Leather straps are not waterproof. Avoid prolonged exposure to water, moisture, and high humidity, which can cause damage, discoloration, or weakening of the leather.
- Cleaning: Wipe the strap gently with a soft, dry cloth to remove dust and dirt. For deeper cleaning, use a specialized leather cleaner sparingly and follow the product's instructions. Avoid harsh chemicals or abrasive materials.
- Storage: When not in use, store your watch with the strap in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Chemicals: Keep the strap away from perfumes, cosmetics, and cleaning agents, as these can stain or damage the leather.
- Regular Inspection: Periodically check the strap for signs of wear, especially around the spring bar attachment points and the clasp.
Troubleshooting
If you encounter issues with your watch strap, consider the following:
- Strap Not Fitting: Ensure the lug width of your watch matches the 23mm width of this strap. Double-check that the spring bars are correctly seated in the lug holes.
- Clasp Not Closing Securely: Inspect the clasp mechanism for any obstructions or damage. Ensure the strap is properly adjusted to your wrist size, allowing the clasp to close without excessive tension.
- Discoloration or Damage: If the strap shows signs of unexpected discoloration or damage, review the maintenance guidelines. Leather is a natural material and will show signs of wear over time.
Specifications
| Feature | Detail |
|---|---|
| Brand | Citizen |
| Compatible Watch Model | Citizen Eco-Drive AT8011-04E (Caliber H800) |
| Compatible Case Number | 4-S088721 |
| Strap Part Number | Cit-26654-S52834 (Citizen strap number: 59-S52834) |
| Material | Genuine Leather |
| Color | Black with bright contrasting stitching |
| Clasp Type | Fold-over clasp with side push buttons and Citizen logo |
| Lug Width | 23 mm |
| Buckle Width | 18 mm |
| Maximum Strap Length (closed) | 190 mm |
| Strap Thickness | Approx. 3.5 - 6.0 mm |
| Shipping Dimensions | 12 x 4 x 2.8 cm |
| Shipping Weight | 50 grams |
| First Available Date | August 20, 2024 |
Warranty Information
The warranty for this product depends on the seller:
- If this product is sold by Amazon, please refer to the manufacturer's website for specific warranty details.
- If this product is sold by a third-party seller, please contact the seller directly for warranty information.
- General warranty information may also be available on the Citizen manufacturer's official website.
Support
For further assistance, technical support, or inquiries regarding your Citizen watch strap, please refer to the following:
- Manufacturer's Website: Visit the official Citizen website for product information, FAQs, and contact details.
- Seller Support: If you purchased this product from a third-party seller, contact them directly for purchase-related support.
- Authorized Service Centers: For professional installation or repair, locate an authorized Citizen service center in your region.
