1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Millennium 1144-RBZ Traditional Four Light Semi-Flush Ceiling Mount. This fixture features a traditional design with four lights, finished in Rubbed Bronze, and is designed for semi-flush ceiling installation. Please read all instructions carefully before beginning installation.
Image 1.1: Front view of the Millennium 1144-RBZ Semi-Flush Ceiling Mount, showcasing its traditional design and rubbed bronze finish.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- This fixture is intended for indoor use only and is rated for dry locations.
- Use only the specified bulb type and wattage. Do not exceed the maximum wattage indicated on the fixture.
- Always wear safety glasses during installation.
- Handle glass components with care to prevent breakage.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer support for assistance.
- Four Light Semi-Flush Ceiling Mount Fixture (1)
- Mounting Hardware Kit (1)
- Installation Instructions (This Manual)
Note: Light bulbs are typically not included and must be purchased separately. This fixture requires four E12 base incandescent bulbs, up to 60 watts each.
4. Setup and Installation
Professional installation is recommended. If you are performing the installation yourself, ensure you have the necessary tools (screwdriver, wire strippers, electrical tape, safety glasses) and follow these general steps:
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltage tester.
- Prepare Mounting: Attach the mounting bracket to the electrical junction box using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
- Wire Connections: Connect the fixture's wires to the corresponding house wires. Typically, connect the black wire from the fixture to the black (hot) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the ground wire from the fixture to the bare copper or green ground wire from the junction box. Secure connections with wire nuts.
- Mount Fixture: Carefully push the wired connections into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws or nuts.
- Install Bulbs: Screw the recommended E12 base incandescent bulbs (up to 60W each) into the sockets.
- Restore Power: Turn the power back on at the circuit breaker or fuse box. Test the fixture to ensure it operates correctly.
Image 4.1: The Millennium 1144-RBZ Semi-Flush Ceiling Mount installed on a ceiling, with its four lights illuminated, showcasing its ambient lighting effect.
5. Operating Instructions
The Millennium 1144-RBZ Semi-Flush Ceiling Mount is designed for simple operation via a standard wall switch. Once properly installed and powered, the fixture will turn on and off with the activation of the connected wall switch.
- Ensure the wall switch connected to the fixture is in the 'ON' position for the lights to operate.
- If the fixture is connected to a dimmer switch, ensure the dimmer is compatible with incandescent bulbs and is rated for the total wattage of the installed bulbs.
Image 5.1: The Millennium 1144-RBZ Semi-Flush Ceiling Mount installed on a ceiling, unlit, highlighting its decorative elements even when not in use.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your lighting fixture.
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
- Bulb Replacement: Before replacing bulbs, turn off power at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E12 base incandescent bulbs, not exceeding 60 watts per bulb.
- Inspection: Periodically inspect the fixture for any loose wiring or damaged components. If any issues are found, disconnect power and consult a qualified electrician.
7. Troubleshooting
If your fixture is not operating correctly, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. | No power to the fixture. Loose wire connections. Faulty bulb(s). | Check circuit breaker/fuse. Verify all wire connections are secure (with power off). Replace bulb(s). |
| Lights flicker. | Loose bulb. Incompatible dimmer switch. Loose wire connection. | Tighten bulb(s). Ensure dimmer is compatible and rated correctly. Check wire connections (with power off). |
| Bulbs burn out quickly. | Incorrect wattage bulb. Over-voltage. | Ensure bulbs do not exceed 60W. Consult an electrician to check voltage. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | MILLENNIUM |
| Model Number | 1144-RBZ |
| Style | Traditional |
| Finish Type | Bronze / Rubbed Bronze |
| Material | Glass, Metal |
| Light Fixture Form | Ceiling (Semi-Flush Mount) |
| Number of Light Sources | 4 |
| Bulb Base | E12 |
| Max Wattage per Bulb | 60 watts |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor |
| Safety Rating | UL Listed (Dry Location) |
| Product Dimensions | 12.5 inches (Width) x 14 inches (Height) |
| Item Weight | 5 Pounds |
9. Warranty Information
This product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation included with your purchase or visit the official Millennium Lighting website. Keep your proof of purchase for warranty validation.
10. Support
For technical assistance, missing parts, or warranty inquiries, please contact Millennium Lighting customer support. You can often find contact information on the manufacturer's website or through the retailer where the product was purchased.
You may also visit the MILLENNIUM Store on Amazon for additional product information and support resources.
