1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Franke Pure 105 1 Jet Hand Shower, model Z.537.460.000. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Product Overview
The Franke Pure 105 1 Jet Hand Shower is designed for efficient and comfortable use in your bathroom. It features a single spray setting and a durable chrome finish.
Figure 1: Franke Pure 105 1 Jet Hand Shower. This image displays the chrome-finished handheld showerhead with its round spray face and rectangular handle, featuring a single jet pattern.
Key Features:
- Single Jet Function: Provides a consistent and powerful spray.
- Eco Jet Technology: Designed for water saving efficiency.
- Easy-to-Clean Nozzles: Simplifies maintenance and prevents mineral buildup.
- Chrome Finish: Durable and aesthetically pleasing.
- Standard Connection: G 1/2 inch connecting thread for easy compatibility.
3. Setup and Installation
This hand shower is designed for handheld installation. Professional installation is recommended. Ensure all local plumbing codes are followed.
Required Tools (Not Included):
- Adjustable wrench
- Plumber's tape (PTFE tape)
- Soft cloth
Installation Steps:
- Prepare the Connection: Ensure the water supply to the shower system is turned off.
- Apply Plumber's Tape: Wrap plumber's tape clockwise around the threads of the shower hose or wall outlet where the hand shower will connect.
- Attach Hand Shower: Carefully screw the Franke Pure 105 hand shower onto the threaded connection (G 1/2 inch). Hand-tighten first, then use an adjustable wrench to tighten an additional quarter to half turn. Do not overtighten.
- Check for Leaks: Turn on the water supply and check for any leaks at the connection point. If leaks occur, tighten slightly more or reapply plumber's tape.
- Test Functionality: Allow water to flow through the hand shower to ensure proper operation of the single jet.
Important: Do not use harsh tools or excessive force during installation, as this may damage the chrome finish or internal components.
4. Operating Instructions
The Franke Pure 105 hand shower features a single, consistent spray pattern. To operate:
- Water Flow: Turn on your shower's water supply to activate water flow through the hand shower.
- Spray Adjustment: This model provides a single jet spray. No adjustments to the spray pattern are available.
- Water Saving: The integrated Eco Jet technology optimizes water usage while maintaining a comfortable spray.
5. Maintenance and Care
Regular cleaning and proper care will ensure the longevity and optimal performance of your hand shower.
Cleaning the Hand Shower:
- Daily Cleaning: Wipe the hand shower with a soft, damp cloth after each use to prevent water spots and soap scum buildup.
- Deep Cleaning: For more thorough cleaning, use a mild soap or a non-abrasive bathroom cleaner specifically designed for chrome finishes. Apply the cleaner to a soft cloth, wipe the surface, and rinse thoroughly with water.
- Nozzle Cleaning: The easy-to-clean nozzles can be gently rubbed with your finger or a soft brush to dislodge any mineral deposits.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based products, or cleaners containing bleach or acids, as these can damage the chrome finish.
Note: Hard water areas may require more frequent cleaning to prevent limescale buildup.
6. Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure | Clogged nozzles | Clean the nozzles by gently rubbing them to remove mineral deposits. |
| Low water pressure | Water supply issue | Check the main water supply to your home or consult a plumber. |
| Leaking at connection point | Loose connection or insufficient plumber's tape | Ensure the connection is tight. Turn off water, reapply plumber's tape, and re-tighten. |
| Water not flowing | Water supply turned off | Check if the main water supply or shower valve is open. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Franke |
| Model Number | Z.537.460.000 |
| Style | Modern |
| Shape | Round (spray face) |
| Material | Metal, Plastic, Rubber |
| Finish Type | Chrome |
| Installation Type | Handheld |
| Number of Settings | 1 |
| Number of Jets | 1 |
| Connecting Thread | G 1/2 inch |
| Item Weight | 8.6 ounces |
| Product Dimensions | 9.7 x 1.5 x 1.5 inches |
| UPC | 630642298048 |
| Included Components | Hand shower |
8. Warranty Information
Franke/KWC AMERICA offers a warranty on its products. The following is a summary of the warranty terms:
Franke/KWC AMERICA will, at its option, repair, replace, or refund the original purchase price of any product that is determined to be defective in material or workmanship under conditions of normal and proper installation, usage, and maintenance during the specified warranty effectiveness periods. All replaced products or parts shall be returned prepaid to KWC AMERICA in Norcross, Georgia. This warranty does not cover installation, labor, or any other incidental charges. This warranty does not apply to products that have been altered in any way unless previously authorized in writing by KWC AMERICA. The warranty only applies to products purchased through authorized KWC AMERICA dealers and distributors.
For specific warranty periods and further details, please refer to the official Franke/KWC AMERICA warranty documentation or contact customer support.
9. Support
If you require further assistance or have questions not covered in this manual, please contact Franke customer support.
- Online Support: Visit the official Franke website for FAQs, product registration, and contact information.
- Contact Manufacturer: Refer to your product packaging or the Franke website for specific customer service contact details (phone, email).