Jameson FG-6PKG-7 FG-Series Manual Pole Saw and Tree Pruner Instruction Manual

Introduction

The Jameson FG-6PKG-7 FG-Series Manual Pole Saw and Tree Pruner is designed for efficient and safe tree trimming. This kit includes a double-pulley pruner for reduced effort, a 16-inch Barracuda Tri-Cut saw blade for clean cuts, and two 6-foot fiberglass poles for extended reach up to 12 feet. The FG Series poles are batch tested to meet OSHA requirements for electrical insulation, providing an added layer of safety when working near potential electrical hazards.

Safety Information

WARNING: Always read and understand all safety instructions before operating this tool. Failure to follow these instructions may result in serious injury or death.

General Safety Guidelines

• Always inspect the tool for damage or wear before each use. Do not use if any components are damaged.
• Maintain a safe working distance from power lines. Fiberglass poles are tested for electrical resistance, but direct contact with live electrical wires can be fatal.
• Ensure a stable footing and clear work area. Be aware of falling branches.
• Do not operate the tool while fatigued or under the influence of drugs or alcohol.

Personal Protective Equipment (PPE)

Always wear appropriate personal protective equipment when using the pole saw and pruner:

• Safety Glasses: To protect eyes from debris.
• Gloves: For improved grip and hand protection.
• Hard Hat: To protect against falling objects.
• Sturdy Footwear: For stability and foot protection.

Package Contents

Verify that all components listed below are present in your package:

• Big Mouth Pruner (1)
• 20-foot Pruner Rope (1)
• Pole Saw Head (1)
• Pole Adapter (1)
• 16-inch Barracuda Tri-Cut Saw Blade (1)
• 6-foot FG Extension Pole (1)
• 6-foot FG Base Pole (1)

Image: Overview of the Jameson FG-Series Pole Pruner Kit components.

Setup and Assembly

1. Connecting Poles

1. Align the male end of one fiberglass pole with the female end of another.
2. Press the leaf spring locking clip on the male end.
3. Insert the male end into the female end until the locking clip snaps securely into the corresponding hole.
4. Ensure the connection is firm and there is no wobble.

Image: Detail of the leaf spring locking clip for secure pole connections.

2. Attaching the Pruner Head

1. Insert the pruner head into the pole adapter. Secure it by ensuring the leaf spring locking clip engages.
2. Thread the 20-foot pruner rope through the double pulley system on the pruner head. Ensure the rope moves freely.
3. Tie a secure knot at the end of the rope to prevent it from slipping through the handle.

Image: The double pulley pruner head, showing the rope path and cutting mechanism.

3. Attaching the Saw Head

1. Insert the pole saw head into the pole adapter.
2. Secure it by ensuring the leaf spring locking clip engages.
3. Confirm the saw blade is firmly attached and does not wobble.

Image: The pole saw head featuring the Barracuda Tri-Cut saw blade.

Operating Instructions

Using the Pruner

1. Extend the poles to the desired length, ensuring all connections are secure.
2. Position the pruner head around the branch you intend to cut. Ensure the branch fits within the pruner's capacity (up to 1-3/4 inches).
3. With one hand holding the pole firmly, use the other hand to pull the pruner rope firmly and steadily. The double-pulley system is designed to reduce the required pulling force.
4. Allow the branch to fall safely, ensuring no one is beneath it.

Image: An individual operating the pole pruner to trim an overhead branch.

Using the Saw

1. Extend the poles to the desired length, ensuring all connections are secure.
2. Position the saw blade on the underside of the branch first, making a small relief cut. This helps prevent bark stripping when the main cut is made.
3. Move the saw blade back and forth using smooth, steady strokes. Avoid forcing the blade, allowing the sharp teeth to do the work.
4. Continue sawing until the branch is cut through. Allow the branch to fall safely, ensuring no one is beneath it.

Image: An individual using the pole saw attachment to cut a tree limb.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Jameson pole saw and pruner.

• Cleaning: After each use, remove sap, dirt, and debris from the pruner blades, saw blade, and pulley mechanism. A damp cloth and mild detergent can be used, followed by thorough drying.
• Lubrication: Apply a light, non-gumming oil to the moving parts of the pruner head and the saw blade to prevent rust and ensure smooth operation.
• Blade Care: Regularly inspect the pruner and saw blades for sharpness. Dull blades can lead to inefficient cutting and increased effort. Sharpen blades as needed or replace them if they are severely damaged or worn.
• Storage: Store the tool in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure blades are protected to prevent accidental injury.

Troubleshooting

Here are solutions to common issues you might encounter:

• Pruner not cutting cleanly: This often indicates dull or dirty blades. Clean the blades thoroughly and sharpen them if necessary. Ensure the pruner mechanism is free of debris.
• Rope tangles or does not pull smoothly: Check that the pruner rope is correctly threaded through all pulleys and is not twisted. Ensure there are no knots or obstructions in the rope path.
• Poles not connecting securely: Inspect the leaf spring locking clips and the corresponding holes on the poles for any damage or debris that might prevent a secure connection. Clean any debris and ensure the clip springs back properly.
• Saw blade sticking in wood: This can happen if the blade is dull or if too much force is applied. Ensure the blade is sharp and use smooth, consistent strokes. Making a relief cut on the underside of the branch first can also help.

Specifications

Warranty Information

The Jameson FG-6PKG-7 FG-Series Manual Pole Saw and Tree Pruner comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the warranty documentation included with your product. You may also visit the official Jameson website or contact their customer support for detailed warranty information.

Customer Support

For further assistance, technical support, replacement parts, or any inquiries regarding your Jameson FG-6PKG-7 FG-Series Manual Pole Saw and Tree Pruner, please contact Jameson customer service or visit their official website.

Jameson Official Store: Visit Jameson Store on Amazon

Please have your model number (FG-6PKG-7) and purchase date available when contacting support.