Important Safety Information
Read all instructions carefully before installing or operating this appliance. Keep this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.
- Ensure proper installation by a qualified technician in accordance with all local codes and standards.
- Disconnect power before servicing or cleaning the unit.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not use this unit with any solid-state speed control device.
- This unit is intended for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
- Clean grease filters frequently. Grease should not be allowed to accumulate on fan or filter.
- Never leave surface units unattended at high settings. Boilover causes smoking and greasy spillovers that may ignite.
- Always turn hood ON when cooking at high heat or when flaming foods.
- Use appropriate size cookware on each surface burner.
What's in the Box
Verify that all components are present before beginning installation.
- Range Hood Unit
- Aluminum Mesh Filters (pre-installed)
- Vent/Damper Assembly
- Screws for Installation
- Rubber Bushings
- User Manual (this document)
- Warranty Information
Specifications
| Feature | Detail |
|---|---|
| Model Number | AN-1260 |
| Material | 430 Stainless Steel |
| Dimensions (L x W x H) | 29.5 in. x 19 in. x 5 in. (75 cm x 48 cm x 12.7 cm) |
| Air Flow Capacity | 325 Cubic Feet Per Minute (CFM) |
| Noise Level | 2 Sones (low speed) |
| Controls Type | Push Button, 3-speed |
| Lighting | 2 x 3-watt LED lights |
| Venting Options | Top or Rear (10 in. x 3-1/4 in. rectangular) |
| Installation Type | Under Cabinet Mount |
| Voltage | 120V/60Hz |
| Amperage | 0.85A |
| Wattage | 106 watts |
| Filter Type | 3-layer Aluminum Mesh |
| Item Weight | 19.9 Pounds |
Setup and Installation
The Ancona AN-1260 Slim Plus range hood is designed for under-cabinet mounting and offers both top and rear venting options. Professional installation is recommended.
1. Pre-Installation Checks
- Ensure the mounting surface is structurally sound and can support the weight of the range hood.
- Verify that the electrical supply (120V/60Hz) is accessible and meets local electrical codes.
- Confirm the chosen venting method (top or rear) and ensure ductwork is properly sized (10 in. x 3-1/4 in. rectangular). This unit is for external ventilation only; internal air recirculation is not possible.
- Unpack all components and inspect for any shipping damage.
2. Mounting the Range Hood
The range hood is designed to fit standard kitchen cabinetry. Use the provided screws and rubber bushings for secure attachment.
Image: Top view of the range hood, illustrating the locations for mounting screws and the top ventilation opening.
Image: Detailed technical diagram showing the dimensions of the range hood and the cut-out sizes for both top and rear ventilation options.
- Carefully measure and mark the mounting points on the underside of the cabinet or the wall for rear venting. Refer to the dimension diagram for precise measurements.
- Drill pilot holes for the mounting screws.
- If using top venting, ensure the cabinet has a corresponding opening for the ductwork. If using rear venting, prepare the wall opening.
- Lift the range hood into position and secure it using the provided screws and rubber bushings. Ensure the unit is level.
3. Electrical Connection
- Connect the range hood to a grounded 120V/60Hz electrical outlet.
- Ensure all wiring connections are secure and comply with local electrical codes.
4. Ductwork Connection
- Attach the vent/damper assembly to the chosen exhaust opening (top or rear) on the range hood.
- Connect the ductwork from the range hood to the external vent. Ensure all connections are sealed to prevent air leaks.
Image: The Ancona AN-1260 range hood seamlessly installed under a kitchen cabinet, demonstrating its low-profile design.
Operating Instructions
The Ancona AN-1260 Slim Plus features intuitive push-button controls for fan speed and lighting.
Image: Front view of the range hood, highlighting the accessible push-button controls and integrated LED lights.
Fan Operation
- Power On/Off: Press the power button to turn the fan on or off.
- Speed Selection: Use the speed control buttons to select one of the three available fan speeds (Low, Medium, High).
- Low Speed: Ideal for simmering or light cooking, providing quiet operation at 2 sones.
- Medium Speed: Suitable for average cooking tasks.
- High Speed: Use for heavy cooking, frying, or when significant smoke and odors are present.
Lighting Operation
- Light On/Off: Press the light button to turn the LED lights on or off. The two 3-watt LED lights provide bright illumination for your cooking surface.
Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
Cleaning the Aluminum Mesh Filters
The 3-layer aluminum mesh filters are designed to trap grease and are dishwasher safe for easy cleaning.
Image: Underside view of the range hood, clearly showing the removable aluminum mesh filters and the integrated LED lighting.
- Removal: Gently push the latch on each filter and pull downwards to release it from the hood.
- Cleaning: Place the filters in a dishwasher or wash them by hand using hot water and a mild detergent. Ensure all grease and residue are removed.
- Drying: Allow the filters to dry completely before re-installing.
- Re-installation: Insert the dry filters back into their slots, ensuring they click securely into place.
Frequency: Clean filters monthly, or more frequently depending on cooking habits.
Cleaning the Stainless Steel Exterior
- Wipe the exterior surfaces with a clean cloth dampened with warm water and a mild, non-abrasive detergent.
- For best results and to maintain the stainless steel finish, wipe in the direction of the grain.
- Avoid using abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- Dry thoroughly with a soft cloth to prevent water spots.
LED Light Replacement
The LED lights are designed for long life. If replacement is necessary, contact Ancona customer support for compatible replacement parts and instructions.
Troubleshooting
Before contacting customer service, review the following common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate. | No power supply; circuit breaker tripped; loose wiring. | Check power connection. Reset circuit breaker. Ensure all wiring is secure. |
| Lights do not work. | Faulty LED bulb; loose connection; no power. | Check power supply. Ensure light button is pressed. If bulbs are faulty, contact support for replacements. |
| Poor suction performance. | Clogged filters; improper ductwork; external damper obstruction. | Clean or replace filters. Check ductwork for kinks or blockages. Ensure external damper opens freely. |
| Excessive noise. | Loose components; motor imbalance; improper installation; ductwork issues. | Ensure all mounting screws are tight. Check for any loose parts inside the hood. Inspect ductwork for restrictions or improper sizing. |
Warranty and Support
This Ancona range hood comes with a manufacturer's warranty. Please refer to the warranty information included in your product packaging for specific terms and conditions.
For technical assistance, replacement parts, or warranty claims, please contact Ancona customer support. You may find contact information on the Ancona website or in the warranty document provided with your purchase.
Online Resources: For additional information and support, visit the official Ancona website.
User Manual (PDF): A digital version of the user manual is available for download: Download PDF Manual
