Kasa Smart Light Switch HS200 User Manual

1. Introduction

The Kasa Smart Light Switch HS200 allows you to control your lights, ceiling fans, and other fixtures from anywhere using your smartphone. This smart switch replaces any standard light switch and connects to your home's 2.4GHz Wi-Fi network. Manage connected fixtures with the free Kasa app, including setting schedules, timers, and countdowns. For added convenience, the HS200 supports voice control through Amazon Alexa and Google Assistant.

2. Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Always ensure power is turned off at the circuit breaker before installation. If you are unfamiliar with electrical wiring, it is recommended to consult a qualified electrician. This device is UL certified for safety use.

For detailed safety guidelines, please refer to the official Safety Information PDF.

3. What's in the Box

The Kasa Smart Light Switch HS200 package includes:

• Kasa Smart Light Switch (HS200)

Image: The Kasa Smart Light Switch HS200 packaging, showing the white smart switch and its box.

4. Setup and Installation

The Kasa or Tapo app provides step-by-step guidance for installation. A neutral wire is required for the HS200 to function. Ensure your electrical box has a neutral wire before beginning installation.

4.1. Pre-Installation Checklist

• Confirm you have a neutral wire (usually white) in your switch box.
• Ensure you have a 2.4GHz Wi-Fi network available.
• Gather basic household tools (screwdriver, wire strippers if needed).

4.2. Wiring Instructions

1. Turn off power: Locate your circuit breaker and turn off the power to the light switch you are replacing. Verify power is off using a voltage tester.
2. Remove old switch: Carefully remove the old switch from the wall box.
3. Identify wires: Identify the Line (hot), Load, Neutral, and Ground wires. The HS200 does not require distinguishing between Line and Load wires.
4. Connect new switch: Connect the wires from the wall box to the corresponding wires on the Kasa Smart Light Switch using wire nuts. Ensure all connections are secure.
5. Mount switch: Carefully push the wires back into the wall box and secure the Kasa Smart Light Switch.
6. Restore power: Turn the power back on at the circuit breaker.

Image: A diagram illustrating the wiring connections for the Kasa Smart Light Switch, showing Line, Load, Neutral, and Ground wires.

For a comprehensive guide, download the official Installation Manual (PDF).

4.3. App Setup

1. Download the Kasa App: Search for 'Kasa Smart' in the Apple App Store or Google Play Store and download the app.
2. Create an Account: Open the Kasa app and follow the on-screen instructions to create a Kasa account.
3. Add Device: Tap the '+' icon in the app to add a new device. Select 'Smart Switches' and then 'Smart Light Switch (HS200)'.
4. Follow In-App Instructions: The app will guide you through connecting the switch to your home Wi-Fi network. This typically involves putting the switch into pairing mode and selecting your Wi-Fi network.

5. Operating Instructions

Once installed and configured with the Kasa app, you can control your HS200 smart switch in various ways:

5.1. Control from Anywhere

Monitor your light status and turn electronics on and off from anywhere using the Kasa app on your smartphone or tablet. This feature works whether you are at home, in the office, or on vacation, provided your switch has an internet connection.

Image: A woman sitting with her dog, using her smartphone to control a light, demonstrating remote control capabilities.

5.2. Voice Control

Enjoy hands-free convenience by controlling your lights with your voice. The Kasa Smart Light Switch HS200 works seamlessly with Amazon Alexa and Google Assistant. Simply link your Kasa account to your preferred voice assistant and use commands like "Alexa, turn on the living room light" or "Hey Google, turn off the kitchen light."

Image: People in a dining room setting, with an Amazon Echo device and a speech bubble indicating a voice command: "Alexa, turn on dining room light."

5.3. Scheduling and Timers

Automate your connected fixtures to follow your daily schedule and preferences. Use the Kasa app to set timer or countdown schedules for your smart switch to automatically turn on and off. This is ideal for daily routines or for enhancing security.

Image: Two side-by-side images showing an outdoor light at 7 a.m. (off) and 6 p.m. (on), illustrating the scheduling feature.

5.4. Away Mode

Enable 'away mode' in the Kasa app to randomly switch your lights on and off. This feature can simulate occupancy, helping to deter potential intruders while you are away from home.

5.5. Grouping

Combine your smart switch with other Kasa Smart devices for seamless control. The Kasa app allows you to group multiple devices, enabling you to control an entire room or set of devices with a single tap or voice command.

Image: A kitchen interior with a smartphone displaying the Kasa app, showing icons for a light bulb, a switch, and a power strip, representing the grouping function.

6. Maintenance

To ensure optimal performance and longevity of your Kasa Smart Light Switch HS200:

• Cleaning: Wipe the switch plate with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Firmware Updates: Regularly check the Kasa app for available firmware updates. Updates often include performance improvements and security enhancements.
• Environmental Conditions: Avoid exposing the switch to excessive moisture or extreme temperatures.

7. Troubleshooting

If you encounter issues with your Kasa Smart Light Switch HS200, try the following:

7.1. Switch Not Responding

• Check Power: Ensure the circuit breaker supplying power to the switch is on.
• Wi-Fi Connection: Verify your home Wi-Fi network is active and the switch is within range. The Kasa app will indicate the switch's connection status.
• Restart Switch: Turn off the power to the switch at the circuit breaker for about 10 seconds, then turn it back on.
• Re-pair: If the issue persists, try re-pairing the switch with the Kasa app.

7.2. Voice Control Issues

• Link Account: Ensure your Kasa account is correctly linked to your Amazon Alexa or Google Assistant app.
• Device Discovery: Ask your voice assistant to discover new devices.
• Command Phrasing: Use clear and precise commands. Refer to the voice assistant's documentation for supported phrases.

For further assistance, consult the Kasa app's help section or the official User Guide (PDF) or User Manual (PDF).

8. Specifications

9. Warranty and Support

Kasa Smart products are designed and developed in Silicon Valley and are trusted by millions of users. For specific warranty details and support information, please refer to the official Kasa Smart website or contact their customer support directly.

Additional resources can be found in the provided PDF documents:

• Safety Information (PDF)
• Installation Manual (PDF)
• User Guide (PDF)
• User Manual (PDF)