Redi-Remote RT076R0TA021

Redi-Remote Replacement Remote Control User Manual for Sansui TVs (Model RT076R0TA021)

Model: RT076R0TA021

Brand: Redi-Remote

1. Introduction

This document provides comprehensive instructions for the Redi-Remote replacement remote control, model RT076R0TA021. This remote is designed to function as a direct replacement for the original remote controls of various Sansui television models.

1.1. Compatibility

This replacement remote control is compatible with the following Sansui TV models:

  • HDLCD3250C, HDLCD3250D, HDLCD4060
  • SLED3900, SLED3900B, 325DS641, 40E6090
  • HDLCD3258, HDLCD4050C, HDLCD2650A, HDLCD4050E
  • SLED3200, SLED5000, HDLCD5050, HDLCD5050A
  • HDLCD4650, 50E7090, HDLCD4050D, HDLCD3250A, HDLCD3250B, HDLCD4650A

This remote is a custom-built replacement and is not an original Sansui product.

2. Setup and Initial Use

2.1. Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide open the battery compartment cover.
  3. Insert four (4) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment. Four AAA batteries are included with the remote.
  4. Close the battery compartment cover securely.

2.2. First Use

This Redi-Remote replacement remote control requires no programming. Once batteries are installed, it is ready for immediate use with your compatible Sansui television.

3. Operating Instructions

The remote control features a standard layout for easy navigation and control of your Sansui television. A sliding cover conceals additional functions.

Redi-Remote Replacement Remote Control for Sansui TVs, showing all buttons including the top section with power, volume, channel, and number keys, and the lower section with media playback and menu navigation buttons revealed by a sliding cover.

Figure 1: Redi-Remote Replacement Remote Control (Model RT076R0TA021) with lower panel extended.

3.1. Top Section Buttons

  • PWR (Power): Turns the television on or off.
  • SLEEP: Activates the sleep timer function.
  • TV/VIDEO: Switches between TV and video input modes.
  • DISP (Display): Shows on-screen display information.
  • VOL +/- (Volume Up/Down): Adjusts the audio volume level.
  • MUTE: Mutes or unmutes the television audio.
  • CH +/- (Channel Up/Down): Changes the television channel.
  • MENU: Accesses the television's main menu.
  • RECALL: Switches to the previously viewed channel.
  • Number Keys (0-9, 100): Directly input channel numbers.
  • ENT (Enter): Confirms numerical input or selections.

3.2. Lower Section Buttons (Slide Down)

To access additional functions, slide down the cover located at the bottom of the remote control. The cover is labeled "SLIDE DOWN".

  • PICTURE SIZE: Adjusts the screen aspect ratio or picture size.
  • EXIT: Exits current menu or on-screen display.
  • AUDIO: Accesses audio settings or modes.
  • INPUT SELECT: Cycles through available input sources (e.g., HDMI, AV).
  • CCD: Likely related to Closed Captioning Display.
  • Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
  • ENTER: Confirms selections within menus.
  • Media Playback Controls (Rewind, Fast Forward, Play, Stop, Pause): Used for controlling connected media devices or TV's built-in media player functions.

4. Maintenance

4.1. Cleaning

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the remote's surface or internal components.

4.2. Battery Replacement

Replace batteries when the remote's performance diminishes or it stops responding. Always replace all four AAA batteries at the same time with new ones. Dispose of used batteries according to local regulations.

5. Troubleshooting

  • Remote not responding:
    • Ensure fresh batteries are correctly installed.
    • Check for any obstructions between the remote and the television's infrared sensor.
    • Point the remote directly at the television.
  • Remote not controlling auxiliary devices:

    This Redi-Remote is designed specifically for Sansui televisions and cannot be programmed to control other devices such as soundbars, DVD players, or cable boxes.

  • Remote not working with a compatible Sansui TV model:

    Verify that your TV model is listed in the compatibility section. If issues persist, contact customer support.

6. Specifications

Model NumberRT076R0TA021
BrandRedi-Remote
Product Dimensions7 x 3 x 1 inches (approximately)
Item Weight5 ounces
Batteries Required4 AAA batteries (included)
Special FeatureNo Programming Required
ColorBlack
Max Number of Supported Devices1 (Sansui TV)

7. Customer Support

For any concerns or questions regarding your Redi-Remote replacement remote control, please contact the seller directly. This ensures you receive prompt and accurate assistance tailored to your purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.