Probrico Soft Close Kitchen Cabinet Door Hinges

Product Overview

The Probrico Soft Close Kitchen Cabinet Door Hinges are designed for face frame cabinets, offering a 105-degree opening angle and a self-closing mechanism with integrated soft-close functionality. These hinges are made from durable iron with a nickel-plated finish, ensuring longevity and smooth operation. They are ideal for replacing existing hinges or for new cabinet installations, providing a quiet and gentle closure for cabinet doors.

Image: A single Probrico soft close kitchen cabinet door hinge, showcasing its nickel-plated finish and robust construction. An inset image shows the hinge installed on a cabinet door.

Safety Information

• Always wear appropriate personal protective equipment, such as safety glasses, during installation.
• Keep small parts and screws out of reach of children to prevent choking hazards.
• Ensure all screws are securely fastened to prevent the cabinet door from detaching.
• Do not overtighten screws, as this may strip the wood or damage the hinge.
• If you are unsure about any step of the installation process, consult a qualified professional.

Parts List

Each pair of Probrico Soft Close Kitchen Cabinet Door Hinges includes the following components:

• Soft Close Hinges (2 pieces per pair)
• Mounting Screws (for hinge cup and mounting plate)
• Mounting Plates

Image: Detailed close-up views of the hinge components, including the cup, arm, and mounting plate, along with the included mounting screws.

Installation Guide

1. Verify Cabinet Type

These hinges are specifically designed for Face Frame Cabinets. A face frame cabinet has a frame around the cabinet opening to which the hinges are mounted. They are not suitable for frameless (European style) cabinets where hinges mount directly to the cabinet walls.

Image: A diagram illustrating the correct cabinet type for these hinges (face frame) versus an incorrect type, highlighting the frame around the cabinet opening.

Image: A visual comparison between face frame (traditional) and frameless (European) cabinet constructions, showing where hinges are typically mounted on each type.

2. Prepare the Door and Cabinet

1. If replacing old hinges, remove them and clean the mounting areas.
2. For new installations, mark the positions for the hinge cups on the cabinet door. The cup size is 35mm in diameter and 11.5mm deep. Ensure the door thickness is between 14-22mm.
3. Drill the 35mm holes for the hinge cups using a Forstner bit.

3. Attach Hinges to Door

1. Insert the hinge cups into the drilled holes on the cabinet door.
2. Secure the hinges to the door using the provided screws.

4. Attach Mounting Plates to Cabinet Frame

1. Position the mounting plates on the cabinet face frame, aligning them with the hinges attached to the door.
2. Mark the screw holes for the mounting plates.
3. Pre-drill pilot holes if necessary to prevent wood splitting.
4. Secure the mounting plates to the cabinet frame using the provided screws.

5. Mount the Door

1. Align the hinges on the door with the mounting plates on the cabinet frame.
2. Click or slide the hinge arms onto the mounting plates until they are securely engaged.

Image: A Probrico hinge securely installed on a kitchen cabinet door, demonstrating its integration with the cabinet structure.

Operating Instructions

Soft-Close Functionality

These hinges feature an integrated soft-close mechanism. When the cabinet door is pushed to close, the soft-close damper engages, slowing down the door's movement for the last few inches. This prevents slamming, reduces noise, and protects both the cabinet and the door from wear and tear.

Image: A diagram illustrating the 105-degree opening angle of the hinge, showing the full range of motion for the cabinet door.

Adjustments

The hinges allow for three-way adjustments (forward/backward, up/down, and side-to-side) to ensure perfect door alignment and gap consistency. Use a Phillips head screwdriver to make these adjustments.

• Forward & Backward Movement: Adjust the screw closest to the cabinet frame to move the door in or out.
• Up & Down Movement: Adjust the screws on the mounting plate to raise or lower the door.
• Side-to-Side Movement: Adjust the screw on the hinge arm to move the door left or right.

Maintenance

• Cleaning: Wipe the hinges periodically with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Lubrication: The soft-close mechanism is designed for long-term performance and typically does not require lubrication. If the hinge action becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, but avoid spraying directly into the soft-close mechanism.
• Tightening: Periodically check all mounting screws and adjustment screws to ensure they are snug. Retighten if necessary, but do not overtighten.

Troubleshooting

Specifications

Warranty and Support

Probrico products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact Probrico customer service directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.