1. Introduction
This manual provides instructions for the safe and efficient use of your AVBcable LTS-6WS 6 Outlet Horizontal Power Strip. This device is designed to provide convenient power distribution for multiple electronic devices. Please read this manual thoroughly before operating the power strip and retain it for future reference.
2. Safety Instructions
To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:
- Do not exceed the electrical ratings: Ensure the total current draw of all connected devices does not exceed the power strip's maximum rating (125 Volts). Overloading can cause overheating and fire.
- Indoor use only: This power strip is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Keep away from water: Do not immerse the power strip in water or expose it to liquids.
- Proper grounding: Always plug the power strip into a properly grounded three-prong outlet.
- Avoid damage: Do not use the power strip if the cord, plug, or housing is damaged. Do not attempt to open or modify the power strip.
- Children and pets: Keep the power strip and its cords out of reach of children and pets.
- Unplug when not in use: Disconnect the power strip from the wall outlet when not in use for extended periods.
3. Package Contents
- AVBcable LTS-6WS 6 Outlet Horizontal Power Strip (1 unit)
4. Setup and Installation
The AVBcable LTS-6WS power strip features a durable metal case and is designed for horizontal placement or mounting.
- Placement: Position the power strip on a stable, dry surface, away from heat sources and moisture.
- Mounting (Optional): The power strip includes mounting holes for secure installation.
- Identify a suitable mounting location, ensuring it is within reach of a grounded wall outlet and away from obstructions.
- Mark the positions for the mounting screws using the power strip's mounting holes as a template.
- Install appropriate screws (not included) into the marked positions, leaving a small gap between the screw head and the surface.
- Align the power strip's mounting holes with the installed screws and slide the power strip down to secure it.
- Connect to Power: Plug the power strip's 6-foot cord with its right-angle plug into a standard 125V AC grounded wall outlet.
Image 1: Top-down view of the AVBcable LTS-6WS power strip, showing six outlets, a red power switch, and the coiled 6-foot power cord with a right-angle plug.
5. Operating Instructions
Using your AVBcable LTS-6WS power strip is straightforward:
- Power On/Off: The power strip features a red rocker switch. Press the switch to the "ON" position to supply power to the outlets. Press it to the "OFF" position to cut power.
- Connecting Devices: Plug your electronic devices into any of the six available outlets. Ensure the devices are compatible with 125V AC power.
- Circuit Breaker (RESET): The power strip includes a built-in circuit breaker to protect against overloads. If the power strip stops supplying power, it may have tripped.
- Unplug some devices to reduce the load.
- Press the "RESET" button (often integrated with the power switch or located nearby) to restore power.
Image 2: Angled view of the AVBcable LTS-6WS power strip, highlighting the red ON/OFF switch and the six horizontally aligned power outlets. The power cord is visible in the foreground.
6. Maintenance
The AVBcable LTS-6WS power strip requires minimal maintenance.
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use immediately.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets. | Power switch is OFF. | Press the power switch to the "ON" position. |
| No power to outlets. | Circuit breaker tripped due to overload. | Unplug some devices, then press the "RESET" button. |
| No power to outlets. | Power strip not plugged into wall outlet. | Ensure the power strip's plug is securely inserted into a working wall outlet. |
| Power strip or connected devices are hot. | Overload or poor ventilation. | Immediately unplug devices. Reduce the load. Ensure adequate airflow around the power strip. |
8. Specifications
- Model: LTS-6WS
- Brand: AVBcable
- Total Power Outlets: 6
- Voltage: 125 Volts
- Cord Length: 6 feet (approximately)
- Plug Type: Right Angle
- Case Material: Metal
- Color: Black
- Special Feature: Mountable
- Item Weight: 14.7 ounces (approximately)
9. Warranty and Support
For information regarding warranty coverage or technical support for your AVBcable LTS-6WS power strip, please refer to the official AVBcable website or contact their customer service directly. Contact details are typically available on the manufacturer's packaging or website.
You can visit the AVBcable store for more information: AVBcable Store