Introduction
The GODOX XTR-16 is a 2.4G wireless power-control flash receiver designed to work seamlessly with GODOX X1 series transmitters. This receiver enables wireless control over various GODOX flash units, including the Witstro AD360, AD180 outdoor flashes, and studio flashes from the Quicker, Quicker D, QT, QS, Gemini GT, Gemini GS, DE, and DP series. It facilitates convenient adjustment of lighting parameters for photographers.
Package Contents
- 1 x GODOX XTR-16 Receiver
Product Overview



Setup
- Powering the Receiver: The XTR-16 receiver is powered via its USB connector when plugged into a compatible flash unit. No external batteries are required for the receiver itself.
- Connecting to Flash Unit: Insert the USB connector of the XTR-16 receiver into the USB port of your compatible GODOX flash unit (e.g., AD360, AD180, Quicker series, etc.).
- Channel Matching: Ensure the channel DIP switches on the XTR-16 receiver match the channel settings on your GODOX X1 series transmitter. Both devices must be set to the same channel for proper communication.
- Power Adjustment: Use the power dial on the XTR-16 receiver to adjust the flash output.
Operating Instructions
- Transmitter Mode: When using the XTR-16 receiver with an X1 series transmitter, set the X1 transmitter to M (Manual) mode.
- Power Control: Adjust the power output of the connected flash unit directly from the XTR-16 receiver's power dial. The X1 transmitter will then trigger the flash at the set power level.
- Triggering: Once the receiver is connected and channels are matched, the flash unit can be triggered wirelessly by the X1 series transmitter.
Important Notes & Compatibility
- The XTR-16 receiver is designed for 2.4G wireless X-system compatibility.
- It supports functions such as high-speed sync when used with compatible X1 series transmitters.
- The XTR-16 receiver cannot adjust parameters when the X1 Transmitter is in TTL (Through-The-Lens) or Multi (Stroboscopic) modes. It is primarily for manual power control.
- Compatible flash units include GODOX Witstro AD360, AD180, Quicker, Quicker D, QT, QS, Gemini GT, Gemini GS, DE, and DP series studio flashes.
Specifications
| Feature | Detail |
|---|---|
| Mode | XTR-16 |
| Connector | USB |
| Wireless System | 2.4G Wireless X-system |
| Item Size | 5.5 x 3 x 2 cm (2.1 x 1.1 x 0.7 inches) |
| Item Weight | 18g (0.6 oz) |
| Product Dimensions | 4.5 x 0.8 x 0.6 inches |
| Manufacturer | GODOX |
| Date First Available | April 2, 2016 |
Troubleshooting
- Flash Not Firing:
- Ensure the XTR-16 receiver is securely connected to the flash unit's USB port.
- Verify that the channel settings on the XTR-16 receiver and the X1 series transmitter are identical.
- Confirm that the X1 series transmitter is set to M (Manual) mode.
- Check the power status of both the flash unit and the X1 series transmitter.
- Inconsistent Power Output:
- Ensure there are no obstructions between the transmitter and receiver.
- Check for potential radio interference in the environment.
Official Product Videos
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official GODOX website or contact your authorized GODOX dealer. Keep your purchase receipt as proof of purchase for any warranty claims.