Introduction
This manual provides comprehensive instructions for the Meliconi 1454 Replacement Remote Control. This remote is designed to be compatible with various Schaub Lorenz television models, offering a ready-to-use solution without the need for complex programming. Please read this manual carefully to ensure proper use and to maximize your viewing experience.
Product Overview
The Meliconi 1454 remote control is a direct replacement for original Schaub Lorenz TV remotes. It is pre-programmed for immediate use with compatible models. Its ergonomic design and intuitive button layout ensure ease of operation.
Figure 1: Meliconi 1454 Replacement Remote Control. This image displays the full layout of the remote control, including all buttons and their labels.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Initial Use
The Meliconi 1454 remote control is designed for immediate use with compatible Schaub Lorenz TV models. No programming or code entry is required. Simply install the batteries, point the remote at your television, and begin operation.
Operating Instructions
This section details the functions of the buttons on your Meliconi 1454 remote control. Refer to Figure 1 for button locations.
- Power Button (Orange button with power icon): Turns the television on or off.
- TV / STB Buttons: Selects between TV mode and Set-Top Box mode, if applicable.
- Number Pad (0-9): Directly enters channel numbers or numerical input for menus.
- 'i' Button: Displays information about the current program or input.
- Input/Source Button (Icon with an arrow entering a rectangle): Cycles through available input sources (e.g., HDMI, AV).
- Volume Up/Down (+/-): Adjusts the audio volume level.
- Channel Up/Down (P+/-): Changes the television channel.
- Mute Button (Crossed speaker icon): Mutes or unmutes the television audio.
- TOOL Button: Accesses quick settings or tool menus.
- PP Button: Function may vary by TV model, often related to picture-in-picture or program preview.
- Color Buttons (Red, Green, Yellow, Blue): Used for specific functions within interactive menus, teletext, or smart TV applications as indicated on screen.
- MENU Button: Opens the main television menu.
- GUIDE Button: Displays the electronic program guide (EPG).
- Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
- OK Button: Confirms selections in menus.
- BACK Button: Returns to the previous menu or screen.
- EXIT Button: Closes the current menu or application.
- SMART Button: Accesses Smart TV features or the main Smart Hub.
- APP Button: Opens the applications menu.
- TEXT Button: Activates or deactivates Teletext.
- Stop Button (Square icon): Stops media playback.
- Record Button ('R' in a circle): Initiates recording if a compatible recording device is connected.
- LIST Button: Displays a list of channels or recorded content.
- Media Control Buttons (Rewind, Play, Pause, Fast Forward): Controls playback of media content (e.g., USB, streaming apps).
- Multi-Screen/Input Button (Three stacked rectangles icon): Function may vary, often related to multi-view or specific input selection.
Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with the proper polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Verify that the remote is pointed directly at the TV.
- Some functions not working:
- While the remote is broadly compatible, specific advanced functions may vary depending on your exact Schaub Lorenz TV model.
- Refer to your television's original user manual for details on specific features.
Specifications
- Brand: Meliconi
- Model: 1454
- Compatibility: Designed for various Schaub Lorenz TV models (e.g., SL 26 940, SL 26 912, SL 32 LT 33, SL 42 LT 843, LT32-354BDB, LD26S-301DB, LT26-359DB, LT26-354BDB, LT32-359FDB, LT26-360FDB4, SL 19 LD 910).
- Special Feature: No programming required (ready-to-use).
- Connectivity Technology: Infrared (Lorenz).
- Power Source: 2 x AAA batteries (not included).
Warranty and Support
Information regarding specific warranty terms or direct customer support contacts for the Meliconi 1454 Replacement Remote Control is not available in the provided product data. Please refer to the retailer or manufacturer's website for further details on warranty coverage and support options.
