1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Access Lighting Neptune LED Outdoor Wall Light. The Neptune fixture, model 20012LEDDMGLP-SAT/RFR, features a satin finish, ribbed frosted glass shade, and is designed for both outdoor and indoor use, particularly in marine environments due to its marine-grade construction.
Figure 1: Access Lighting Neptune LED Outdoor Wall Light, front view.
2. Safety Information
WARNING: To avoid fire, electric shock, or serious personal injury, always follow these safety precautions during installation and operation.
- Disconnect Power: Always turn off power at the circuit breaker or fuse box before installing, servicing, or cleaning the fixture.
- Qualified Electrician: Installation should be performed by a qualified electrician or certified personnel in accordance with all applicable local electrical codes.
- Grounding: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Handle with Care: Do not handle the fixture or components with wet hands.
- Bulb Type: Use only the specified bulb type and wattage to prevent overheating and damage.
- UL Certified: This product is UL certified, ensuring compliance with nationally recognized product safety standards.
3. Package Contents
Verify that all components are present before beginning installation:
- Neptune LED Outdoor Wall Light Fixture
- E26 Base LED Bulb (9-watt, 800 Lumens, 3000K)
- Mounting Hardware (screws, wire nuts, etc.)
- Instruction Manual
4. Setup and Installation
Follow these steps for proper installation of your wall light:
- Prepare for Installation: Turn off power at the main circuit breaker. Clear the installation area.
- Mount the Backplate: Secure the fixture's backplate to the wall junction box using the provided mounting hardware. The backplate measures approximately 4.6 inches (H) x 7 inches (W). Ensure it is firmly attached.
- Wiring Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure. This fixture operates on 120 Volts.
- Secure the Fixture: Carefully align the fixture body with the mounted backplate and secure it using the provided screws. Ensure no wires are pinched during this step.
- Install the Bulb: Insert the E26 base LED bulb into the socket. Do not overtighten.
- Restore Power: Once the fixture is securely installed and the bulb is in place, restore power at the circuit breaker.
Figure 2: Neptune LED Outdoor Wall Light installed in an outdoor setting.
5. Operating Instructions
The Access Lighting Neptune LED Outdoor Wall Light is designed for simple operation. Once properly installed and powered, the light can be controlled via a standard wall switch. The fixture's internal control method is described as 'Touch' or 'Push Button', indicating it responds to standard electrical switching mechanisms.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your wall light.
- Cleaning: Turn off power before cleaning. Use a soft, damp cloth to wipe the fixture's satin finish and glass shade. Avoid abrasive cleaners or solvents, as these can damage the finish.
- Bulb Replacement: If the included LED bulb needs replacement, ensure power is off. Allow the bulb to cool before carefully unscrewing it. Replace with an E26 base LED bulb of similar wattage (9W) and light output (800 Lumens, 3000K color temperature) for consistent performance.
- Inspection: Periodically inspect the fixture for any signs of wear, loose connections, or damage. Address any issues promptly.
7. Troubleshooting
If your wall light is not functioning correctly, refer to the following common issues and solutions:
- Light Does Not Turn On:
- Check if the power is on at the circuit breaker.
- Ensure the bulb is correctly installed and not loose or burnt out.
- Verify all wiring connections are secure.
- Light is Dim or Flickering:
- Confirm the bulb wattage matches the fixture's requirements.
- Check for loose wiring connections.
- Fixture Overheats:
- Ensure the correct bulb wattage is used. Do not exceed 9 watts.
- Ensure proper ventilation around the fixture.
If issues persist, consult a qualified electrician or contact Access Lighting customer support.
8. Specifications
Figure 3: Front dimensions of the Neptune Wall Light.
Figure 4: Side dimensions of the Neptune Wall Light.
| Feature | Specification |
|---|---|
| Brand | Access Lighting |
| Model Number | 20012LEDDMGLP-SAT/RFR |
| Product Dimensions | 5 x 7 x 13 inches (Depth x Width x Height) |
| Item Weight | 5.32 pounds |
| Material | Aluminum |
| Finish | Satin |
| Shade Material | Ribbed Frosted Glass |
| Light Source Type | LED |
| Bulb Base | E26 |
| Wattage | 9 watts |
| Brightness | 800 Lumens |
| Color Temperature | 3000K (Warm White) |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Outdoor (UL Certified) |
| Installation Type | Surface-Mounted |
| Water Resistance Level | Water Resistant (Marine Grade) |
| Control Method | Touch / Push Button (via wall switch) |
9. Warranty and Support
Your Access Lighting Neptune LED Outdoor Wall Light is covered by a 2-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions not addressed in this manual, please contact Access Lighting directly. Keep your purchase receipt as proof of purchase for warranty purposes.
