Introduction
Thank you for choosing the Hisense WD3S1043BT6 2-in-1 Front Load Washing & Drying Machine. This appliance combines washing and drying functions into a single unit, offering convenience and efficiency. It features an Inverter motor for quiet operation and energy efficiency, Auto Dose technology for precise detergent dispensing, and Wi-Fi connectivity for smart control. Please read this manual carefully before using your new appliance to ensure safe and optimal performance.
1. Setup and Installation
1.1 Unpacking and Transit Bolt Removal
Before operating the machine, remove all transit bolts located at the rear of the appliance. These bolts secure the drum during transportation and must be removed to prevent damage during operation. Keep the bolts for future transport if needed.
1.2 Leveling the Appliance
Place the machine on a firm, level surface. Adjust the leveling feet at the bottom of the appliance until it is stable and does not rock. Proper leveling reduces vibration and noise during operation.
1.3 Water Connection
Connect the water inlet hose to a cold water tap with a 3/4-inch thread. Ensure all connections are tight to prevent leaks. Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fastened and not kinked.
1.4 Electrical Connection
Plug the power cord into a grounded electrical outlet. Ensure the voltage and frequency match the specifications listed on the appliance's rating label.
Figure 1: Front view of the Hisense WD3S1043BT6 appliance, showing the control panel, detergent drawer, and front-loading door.
2. Operating Instructions
2.1 Loading Laundry
Open the door and load laundry into the drum. Do not overload the machine; ensure there is enough space for clothes to tumble freely. For optimal washing and drying, adhere to the maximum load capacities (10.5 kg for washing, 7 kg for drying).
Figure 2: The appliance with its front door open, showing the drum ready for laundry loading.
2.2 Detergent and Softener Dispensing (Auto Dose)
The machine features an Auto Dose system. Fill the detergent and softener compartments in the dispenser drawer. The machine will automatically dispense the correct amount based on the load size and selected program. This system can store enough detergent for approximately one month of use.
Figure 3: The detergent dispenser drawer, highlighting the compartments for detergent and softener.
2.3 Program Selection
Turn the program selector dial to choose the desired wash or wash & dry program. Available programs include:
- Cotton: For durable cotton items.
- Synthetics: For synthetic or mixed fabrics.
- Wool: For delicate woolens.
- Quick Wash: For lightly soiled items requiring a fast cycle.
- Allergy Care: For enhanced hygiene.
- Refresh: For refreshing clothes without full washing.
- Drying Programs: Various options for different fabric types and dryness levels.
2.4 Starting a Cycle
After selecting the program and any desired options (temperature, spin speed, drying level), press the Start/Pause button to begin the cycle.
2.5 Wi-Fi Connectivity
This appliance can be controlled via Wi-Fi using the Hisense ConnectLife app. Download the app, register your device, and follow the in-app instructions for remote control and monitoring.
3. Maintenance and Care
3.1 Cleaning the Detergent Drawer
Regularly remove and clean the detergent drawer to prevent residue buildup. Rinse it under running water and use a brush to remove any stubborn deposits.
3.2 Cleaning the Drum
Run a drum clean cycle periodically (if available) or a hot wash with no laundry and a descaling agent to remove detergent residue and prevent odors. The drum is made of stainless steel for durability.
Figure 4: The interior of the stainless steel drum, designed for effective washing and drying.
3.3 Cleaning the Pump Filter
Locate the pump filter at the bottom front of the machine. Open the cover, drain any residual water, and carefully unscrew the filter. Remove any lint, coins, or foreign objects, then clean and reinsert the filter securely.
3.4 Exterior Cleaning
Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
4. Troubleshooting Guide
If you encounter issues with your appliance, refer to the following common problems and solutions before contacting customer service.
- Machine does not start: Ensure the power cord is plugged in, the door is closed properly, and the Start/Pause button has been pressed. Check if the water supply is turned on.
- No water filling: Check if the water tap is open and the inlet hose is not kinked. Ensure the water pressure is adequate.
- Water leakage: Verify that the inlet and drain hoses are securely connected and not damaged. Check the pump filter for proper sealing.
- Excessive vibration/noise: Ensure the machine is level and all transit bolts have been removed. Distribute laundry evenly inside the drum.
- Poor washing/drying results: Do not overload the machine. Use the correct amount of detergent for the load and water hardness. Select the appropriate program for the fabric type.
- Error codes: If an error code appears on the display, consult the full user manual for specific meanings and troubleshooting steps. Often, turning the machine off and on again can reset minor errors.
5. Technical Specifications
| Model | WD3S1043BT6 |
| Type | Front Load Washer Dryer |
| Wash Capacity | 10.5 kg |
| Dry Capacity | 7 kg |
| Dimensions (W x D x H) | 60 x 61 x 85 cm |
| Item Weight | 75 kg |
| Wattage | 1800 W |
| Drum Material | Stainless Steel |
| Special Features | Auto Dose, High Efficiency, Inverter, Load Sensor, Wi-Fi |
| Energy Efficiency Class | A Class |
| Color | Grey |
6. Warranty Information
This Hisense appliance comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. The warranty covers manufacturing defects and malfunctions under normal household use. It does not cover damage caused by improper installation, misuse, neglect, unauthorized repairs, or normal wear and tear. For full terms and conditions, please refer to the warranty card included with your product or visit the official Hisense website.
7. Customer Support
If you require further assistance, have questions not covered in this manual, or need to report a service issue, please contact Hisense customer support. You can find contact details (phone numbers, email, or online support portal) on the official Hisense website or in the documentation provided with your appliance. When contacting support, please have your model number (WD3S1043BT6) and serial number ready.
