Introduction
The Winix 5500-2 Air Cleaner is designed for any home environment, effectively capturing dust, pollen, pet dander, smoke, mold spores, volatile organic compounds, and household odors. This unit is ideal for medium to large living spaces, kitchens, or bedrooms, utilizing a 3-Stage Air Cleaning System for superior air quality.
Safety Information
Always read and follow all safety instructions before operating this appliance. Keep the appliance away from water and do not operate with a damaged cord or plug. Ensure proper ventilation and do not block air inlets or outlets. Unplug the unit before performing any maintenance.
Package Contents
- Winix 5500-2 Air Purifier Unit
- Washable AOC Carbon Filter
- True HEPA Filter
- User Manual (PDF) - Download PDF
- User Guide (PDF) - Download PDF
Product Overview
The Winix 5500-2 features a sleek design with intuitive controls and a robust filtration system.
Figure 1: Front view of the Winix 5500-2 Air Purifier in Charcoal Gray.
Figure 2: Dimensions of the Winix 5500-2 Air Purifier (14.9"W x 8.2"D x 23.6"H).
Figure 3: Detailed view of the control panel with various function buttons.
Control Panel Overview
Video 1: A detailed overview of the Winix 5500-2 Air Purifier's control panel and its various functions, including mode selection, fan speed adjustment, and timer settings.
Setup
Before first use, ensure all filters are removed from their protective plastic packaging and installed correctly.
- Open the front cover of the air purifier by gently pulling from the top or sides.
- Remove the pre-filter, AOC Carbon Filter, and True HEPA Filter.
- Remove all plastic packaging from the filters.
- Insert the True HEPA Filter first, ensuring the "Air Flow" arrow points towards the unit.
- Place the AOC Carbon Filter on top of the HEPA filter.
- Re-attach the pre-filter.
- Close the front cover securely.
- Plug the power cord into a standard 120V AC outlet.
Filter Installation Guide
Video 2: A visual guide demonstrating the correct way to install and replace the filters in your Winix 5500-2 Air Purifier.
Operating Instructions
The Winix 5500-2 offers various modes and settings for optimal air purification.
Power On/Off
Press the On/Off button to turn the unit on or off.
Mode Selection
Press the Mode button to cycle through the following modes:
- Auto Mode: The unit automatically adjusts fan speed based on real-time air quality detected by the Smart Sensor. The air quality indicator light (blue for good, orange for fair, red for poor) will change accordingly.
- Sleep Mode: When the room is darkened, the unit automatically activates Sleep Mode, operating at a quiet, energy-efficient speed. All indicator lights, except the moon icon, will dim or turn off.
Figure 4: Air Quality Indicator lights (Blue: Good, Orange: Fair, Red: Poor).
Figure 5: The air purifier operating in quiet Sleep Mode.
Fan Speed
Press the Fan Speed button to manually select desired fan speed (Low, Medium, High, Turbo). Note: Manual fan speed overrides Auto Mode.
PlasmaWave Technology
Press the PlasmaWave button to enable or disable PlasmaWave technology, which attacks pollutants at a molecular level.
Timer
Press the Timer button to set the unit to operate for 1, 4, or 8 hours before automatically turning off.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your air purifier.
Filter Care
The Winix 5500-2 features a Check Filter indicator light that illuminates when it's time to clean or replace filters.
- Washable Pre-Filter: Clean every 14 days or as needed. Vacuum or wash with water. Ensure completely dry before re-installing.
- Washable AOC Carbon Filter: Clean every 3 months or as needed. Vacuum or wash with water. Ensure completely dry before re-installing.
- True HEPA Filter: Replace every 12 months or as needed. This filter is NOT washable.
Visual Guide to Filter Condition
Video 3: Observe the condition of the Winix filters after use, demonstrating their effectiveness in capturing airborne particles.
Filter Cleaning and Replacement
Video 4: Learn how to properly clean the washable pre-filter and AOC Carbon Filter, and replace the True HEPA Filter.
After cleaning or replacing filters, press and hold the Reset button for 5 seconds to reset the filter indicator light.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | Power cord unplugged; Filters not installed correctly. | Ensure power cord is securely plugged in; Check filter installation and remove all plastic packaging. |
| Airflow is weak | Filters are dirty; Air inlets/outlets blocked. | Clean or replace filters; Ensure nothing is blocking the air vents. |
| Unusual noise | Foreign object in fan; Unit not on a flat surface. | Unplug and check for obstructions; Place unit on a firm, level surface. |
| Odor persists | Carbon filter needs replacement; PlasmaWave is off. | Replace AOC Carbon Filter; Ensure PlasmaWave is enabled. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 5500-2 |
| Color | Charcoal Gray |
| Product Dimensions | 8.2"D x 14.9"W x 23.6"H |
| Item Weight | 14.74 pounds |
| Floor Area Coverage | 360 Square Feet |
| Noise Level | 27.8 dB |
| Wattage | 70 watts |
| Filter Type | True HEPA, Washable AOC Carbon Filter |
| Certifications | UL Certified, AHAM Certified, Energy Star Certified, CARB Certified |
Warranty and Support
The Winix 5500-2 Air Purifier comes with a Two-year limited manufacturer's warranty.
For technical support, warranty claims, or replacement parts, please visit the official Winix website or contact their customer service directly.
Official Winix Store: Winix Store on Amazon
