Introduction
This manual provides comprehensive instructions for the RM Series Replacement Remote Control, specifically designed for the Manhattan PLAZA-HD-S2 receiver. This remote is engineered to replicate all functions of your original remote control without requiring any complex programming or setup. Simply insert the batteries, and it is ready for immediate use.
The RM Series remote controls are developed and assembled in the UK, utilizing advanced chipset technology to ensure precise infra-red code matching with the original device. Unlike generic universal remotes, every button on this RM Series remote is 100% correctly labeled, eliminating the need to constantly refer to an instruction manual for button functions.
Key features include:
- Full functionality of the original remote control supplied with your device.
- Dedicated replacement, not a generic "Universal" remote.
- No programming or setup required; works straight out of the box.
- Equipped with a red LED indicator for signal transmission.
- Superior quality construction, assembled and tested in the UK.
- Buttons are correctly labeled to match the original remote's functions.
Setup
Setting up your RM Series Replacement Remote Control is a straightforward process. No complex pairing or code entry is required.
1. Battery Installation
The remote control requires two (2) AAA batteries for operation. Ensure you use fresh batteries for optimal performance.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Once batteries are installed, the remote is ready to operate your Manhattan PLAZA-HD-S2 receiver.
Figure 1: Angled view of the RM Series Replacement Remote Control. This image highlights the ergonomic design and the clear labeling of buttons, including power, mute, number pad, navigation, volume, and channel controls.
Operating Instructions
The RM Series Replacement Remote Control is designed for intuitive use, mirroring the functionality of your original Manhattan PLAZA-HD-S2 remote. All buttons are clearly labeled to perform their intended functions.
Basic Operation
- Power Button: Press the POWER button (usually located at the top left) to turn your Manhattan PLAZA-HD-S2 receiver on or off.
- Number Buttons (0-9): Use these buttons to directly enter channel numbers.
- Volume Control: Use the VOL + and VOL - buttons to adjust the audio volume.
- Channel Control: Use the P + and P - buttons to change channels sequentially.
- Mute Button: Press the MUTE button to temporarily silence the audio. Press again to restore sound.
- Navigation Pad (Arrow Buttons and OK): Use the directional arrow buttons (UP, DOWN, LEFT, RIGHT) to navigate menus and select options. Press the OK button in the center to confirm selections.
- Menu Button: Access the main menu of your receiver.
- Guide Button: Open the electronic program guide (EPG).
- Info Button: Display information about the current program.
- Colored Buttons: (Red, Green, Yellow, Blue) These buttons typically correspond to specific functions within menus or interactive services, as indicated on your TV screen.
Figure 2: Front view of the RM Series Replacement Remote Control. This image provides a clear overview of the entire button layout, including the power, mute, numerical keypad, navigation cluster, volume, channel, and various function buttons like GUIDE, INFO, MENU, and LIST.
Advanced Functions
The remote also includes dedicated buttons for advanced functions, depending on your receiver's capabilities:
- APPS: Access smart applications or internet features.
- BACK: Return to the previous screen or menu.
- EXIT: Exit the current menu or application.
- P>P (Picture-in-Picture): If supported by your receiver, this button controls PiP functions.
- AD (Audio Description): Toggle audio description for visually impaired users.
- MODE: Switch between different input modes or functions.
- SUB (Subtitles): Enable or disable subtitles.
- TXT (Teletext): Access teletext services.
- SWAP: Quickly switch between two previously viewed channels.
- FAV (Favorites): Access your list of favorite channels.
For specific functions related to your Manhattan PLAZA-HD-S2 receiver, refer to your receiver's user manual.
Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your RM Series Replacement Remote Control.
Cleaning
- Wipe the remote control regularly with a soft, dry cloth to remove dust and fingerprints.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the remote.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the remote's surface and internal components.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up consistently when a button is pressed. Always replace both batteries at the same time with new AAA batteries.
Storage
- Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
- If the remote will not be used for an extended period (e.g., several months), it is advisable to remove the batteries to prevent leakage and potential damage to the remote.
Troubleshooting
If you encounter issues with your RM Series Replacement Remote Control, try the following troubleshooting steps before seeking further assistance.
Remote Not Responding
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace old or depleted batteries with new AAA batteries.
- Line of Sight: Make sure there is a clear line of sight between the remote control's infrared emitter (at the front of the remote) and the infrared receiver on your Manhattan PLAZA-HD-S2 receiver. Obstructions can block the signal.
- Distance: Ensure you are within the effective operating range (up to 10 meters).
- Receiver Power: Confirm that your Manhattan PLAZA-HD-S2 receiver is powered on and functioning correctly.
Buttons Not Working Correctly
- Clean Remote: Dirt or debris under the buttons can sometimes cause them to stick or not register presses. Refer to the Maintenance section for cleaning instructions.
- Battery Check: Weak batteries can lead to inconsistent button responses. Replace them.
Interference
- Bright light sources, especially fluorescent lights or direct sunlight, can sometimes interfere with infrared signals. Try operating the remote in different lighting conditions.
- Other infrared devices operating nearby might cause interference.
If the issue persists after trying these steps, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | RM-Series |
| Model Number | HD-S2 |
| Compatible Devices | Manhattan PLAZA-HD-S2 (Television/Receiver) |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Number of Buttons | 25 |
| Maximum Range | 10 Meters |
| Batteries Required | 2 x AAA batteries |
| Product Dimensions | 22.7 x 5 x 2.4 cm |
| Item Weight | 86.18 g |
| Colour | Red |
| Max Number of Supported Devices | 1 |
Warranty and Support
RM Series remote controls are manufactured to high standards and undergo vigorous testing to ensure long-term use and reliability. All RM Series products are CE and ROHS compliant.
For any technical support or inquiries regarding your RM Series Replacement Remote Control, please contact the manufacturer, RM Series, or your point of purchase. Keep your purchase receipt as proof of purchase.
The RM Series range of remote controls has been a popular choice within the professional TV servicing industry across Europe for over a decade, attesting to their quality and reliability.
