1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Eglo Infesto 1 LED Outdoor Wall Light. Please read these instructions carefully before installation and retain them for future reference.
Eglo Infesto 1 LED Outdoor Wall Light installed on a modern grey wall next to stairs, emitting warm light.
2. Safety Instructions
- Always disconnect the main power supply before attempting any installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the product is properly grounded to prevent electric shock.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- This luminaire is designed for outdoor use with an IP44 rating, meaning it is protected against splashing water. Do not immerse in water.
- Use only with the specified voltage of 240 Volts.
- The integrated LED module is not user-replaceable. Do not attempt to open or replace the LED components.
3. Package Contents
Verify that all components are present and undamaged before beginning installation:
- 1 x Eglo Infesto 1 LED Outdoor Wall Light (Model 94877)
- 1 x Assembly Instructions
4. Setup and Installation
Follow these steps for proper installation. Professional installation is recommended.
- Prepare the Installation Area: Ensure the power supply to the installation area is turned off at the main circuit breaker.
- Mark Drilling Points: Position the mounting bracket on the desired wall surface and mark the drilling points.
- Drill Holes and Insert Anchors: Drill holes at the marked positions and insert appropriate wall anchors (not included, choose based on wall material).
- Mount the Bracket: Secure the mounting bracket to the wall using screws.
- Connect Wiring: Carefully connect the electrical wires from the wall to the luminaire's terminals (Live, Neutral, Earth) according to the wiring diagram. Ensure all connections are secure.
- Attach the Fixture: Secure the main body of the wall light to the mounting bracket, ensuring it is firmly attached.
- Restore Power: Once installation is complete and all connections are checked, restore power at the main circuit breaker.
Exploded view diagram illustrating the installation steps for the Eglo Infesto 1 LED Outdoor Wall Light, showing mounting screws and wiring.
Dimensional diagram of the Eglo Infesto 1 LED Outdoor Wall Light, showing length, width, and depth measurements.
5. Operating Instructions
The Eglo Infesto 1 LED Outdoor Wall Light is operated via a standard wall switch connected to its power supply. Simply toggle the switch to turn the light on or off.
- Dimmable Feature: This luminaire is dimmable. To utilize the dimming function, ensure you have a compatible dimmer switch installed in your electrical system. Refer to your dimmer switch's instructions for proper operation.
Eglo Infesto 1 LED Outdoor Wall Light illuminating an outdoor space at dusk.
6. Maintenance
- Cleaning: To clean the luminaire, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- LED Module: The LED module is integrated and designed for a long lifespan. It is not user-replaceable. If the LED module fails, the entire fixture may need to be replaced.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply, loose wiring, faulty switch. | Check main power supply, ensure all wiring connections are secure, test the wall switch. Consult a qualified electrician if necessary. |
| Light is flickering. | Loose wiring, incompatible dimmer switch. | Check all wiring connections. If using a dimmer, ensure it is compatible with LED luminaires. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 94877 |
| Brand | Eglo |
| Dimensions (L x W x H) | 25 cm x 7 cm x 25 cm |
| Material | Plastic, Stainless Steel |
| Color/Finish | Silver / White |
| Light Source | Integrated LED |
| Power Consumption | 8.2 Watts |
| Luminous Flux | 820 Lumens |
| Light Color | Warm White |
| Voltage | 240 Volts |
| Water Resistance Rating | IP44 (Water-resistant) |
| Mounting Type | Wall Mount |
| Dimmable | Yes (with compatible dimmer) |
| Assembly Required | Yes |
| Intended Use | Outdoor |
9. Warranty and Support
The Eglo Infesto 1 LED Outdoor Wall Light comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Eglo website.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Eglo customer support directly. Contact information can typically be found on the product packaging or the official Eglo website.
