1. Product Overview
The Faria Beede 32816 Euro GPS Speedometer is designed for marine applications, providing accurate speed readings up to 60 MPH using GPS technology. It features a sleek design suitable for various boat dashboards.
Image of the Faria Beede 32816 Euro Speedometer, featuring a black dial, white graphics, a contoured white pointer, and a black aluminum bezel.
Key Features:
- Perimeter-lighted black dial with a contoured white pointer for clear visibility.
- Bold white graphics for easy reading.
- Durable black aluminum bezel.
- Flat glass lens for enhanced clarity.
- Size 4 gauge, requiring a 3.375" (85 mm) mounting hole.
2. Safety Information
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in product damage, property damage, or serious injury.
- Electrical Safety: Disconnect all power to the vessel's electrical system before installation. Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Mounting: Ensure the mounting location is structurally sound and free from obstructions. Use appropriate tools and techniques to create the mounting hole.
- Water Exposure: While designed for marine environments, ensure all connections are sealed to prevent water ingress, especially in areas prone to splashing or submersion.
- GPS Signal: The GPS antenna requires a clear view of the sky for optimal performance. Avoid mounting near large metal objects that could obstruct the signal.
- Operation: Do not attempt to operate the vessel solely based on this speedometer's readings in critical navigation situations. Always use official navigation charts and other reliable instruments.
3. Package Contents
Verify that all items are present in the package before beginning installation:
- Faria Beede 32816 Euro Speedometer GPS (60 MPH) Studded - 4, Black
- Mounting hardware (nuts, washers, bracket)
- Wiring harness (if included)
- GPS antenna
- Instruction sheet (this document)
4. Installation and Setup
Proper installation is crucial for the accurate and reliable operation of your GPS speedometer.
4.1 Mounting the Speedometer
- Choose a suitable location on your dashboard that provides clear visibility and is protected from excessive moisture.
- Using a hole saw, cut a 3.375" (85 mm) diameter mounting hole. Ensure there is sufficient clearance behind the panel for wiring and the gauge body.
- Insert the speedometer into the mounting hole.
- Secure the speedometer using the provided mounting bracket, nuts, and washers from the rear of the panel. Tighten securely but do not overtighten.
4.2 Wiring Connections
Refer to the wiring diagram typically provided with the product for specific connections. General connections include:
- Power (12V DC): Connect the positive wire (usually red) to a switched 12V DC power source.
- Ground: Connect the negative wire (usually black) to a reliable vessel ground.
- Illumination: Connect the illumination wire (if present, often blue or white) to your vessel's dashboard lighting circuit for night visibility.
- GPS Antenna: Connect the GPS antenna cable to the designated port on the back of the speedometer.
4.3 GPS Antenna Placement
The GPS antenna must have an unobstructed view of the sky to receive satellite signals. Mount the antenna in an open area, away from metal structures, radar, or other electronic devices that could interfere with the signal.
5. Operation
Once installed and powered, the speedometer will begin to acquire GPS satellite signals.
5.1 Initial Power-Up and GPS Acquisition
- Turn on the vessel's ignition or the switch connected to the speedometer's power supply.
- The speedometer needle may sweep or indicate a zero reading while it searches for GPS signals.
- Once a sufficient number of satellites are acquired, the speedometer will display the current speed. This process may take a few minutes, especially during the first use or after a long period of inactivity.
5.2 Reading the Speedometer
The speedometer displays your vessel's speed in miles per hour (MPH) via the analog needle. The scale ranges from 0 to 60 MPH.
6. Maintenance
The Faria Beede GPS Speedometer is designed for durability and requires minimal maintenance.
- Cleaning: Clean the gauge face and bezel with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the lens or finish.
- Inspection: Periodically check all wiring connections for corrosion or looseness. Ensure the GPS antenna cable is securely connected and undamaged.
- Storage: If the vessel is stored for an extended period, ensure the speedometer is protected from extreme temperatures and moisture.
7. Troubleshooting
If you encounter issues with your speedometer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speedometer does not power on. | No power supply; Blown fuse; Loose wiring. | Check power connections and vessel fuse panel. Ensure all wires are securely connected. |
| No speed reading (needle at zero). | No GPS signal; GPS antenna disconnected or faulty; Obstruction to GPS signal. | Ensure GPS antenna has a clear view of the sky. Check antenna cable connection. Move vessel to an open area. Allow time for signal acquisition. |
| Inaccurate speed reading. | Poor GPS signal; Interference. | Verify GPS antenna placement. Ensure no strong electrical interference sources are nearby. |
| Illumination not working. | Illumination wire disconnected; Vessel's lighting circuit off or faulty. | Check illumination wire connection. Verify vessel's navigation lights or dashboard lights are on and functioning. |
8. Specifications
Detailed technical specifications for the Faria Beede 32816 Euro GPS Speedometer:
| Specification | Value |
|---|---|
| Model Name | FARIA BEEDE 32816 Euro Speedometer GPS (60 MPH) Studded - 4, Black |
| Part Number | 32816 |
| Brand | Faria |
| Measurement Range | 0 - 60 MPH |
| Mounting Hole Size | 3.375" (85 mm) |
| Color | Black |
| Material | Aluminum |
| Item Weight | 10.88 ounces |
| Item Dimensions (LxWxH) | 5 x 5.5 x 5.5 inches |
| Manufacturer | Faria Beede |
| Date First Available | March 14, 2016 |
9. Warranty and Support
9.1 Warranty Information
This product is covered by a manufacturer's warranty. For specific details regarding the warranty period and coverage, please refer to the warranty documentation included with your purchase or visit the official Faria Beede website.
9.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Faria Beede customer support. Contact information can typically be found on the manufacturer's website or on the product packaging.
Website: www.fariabeede.com (This is a placeholder link, please verify the actual manufacturer's support website.)