Introduction
This manual provides instructions for the setup, operation, and maintenance of your Insignia NS-RC4NA-14 Remote Control. This remote is designed as a direct replacement for various Insignia LED and LCD HDTV models, ensuring seamless compatibility and functionality.
Compatible Insignia TV models include: NS-22E400NA14, NS-24E200NA14, NS-24E400NA14, NS-28E200NA14, NS-32D200NA14, NS-32E400NA14, NS-39D400NA14, NS-39E400NA14, NS-39L400NA14, NS-40D40SNA14, NS-46D400NA14, NS-46E440NA14, NS-50D400NA14, NS-50E440NA14, NS-50L440NA14, NS-55D440NA14.
Setup
1. Battery Installation
The Insignia NS-RC4NA-14 remote control requires two AAA batteries (not included) for operation. Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
2. Initial Use
This remote control is designed as a direct replacement and typically does not require programming. Once batteries are installed, point the remote towards your Insignia TV and begin operation.
Operating Instructions
Familiarize yourself with the buttons on your Insignia NS-RC4NA-14 remote control:
Image: Front view of the Insignia NS-RC4NA-14 remote control. It is black with clearly labeled buttons for power, input, number pad, navigation, volume, channel, menu, and playback controls. The Insignia logo and model number NS-RC4NA-14 are visible at the bottom.
| Button | Function |
|---|---|
| Power (Red) | Turns the TV on or off. |
| INPUT | Selects the video input source (e.g., HDMI 1, AV, Component). |
| Number Pad (0-9) | Directly enters channel numbers. |
| MENU | Accesses the TV's main menu for settings and options. |
| EXIT | Exits the current menu or on-screen display. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| ENTER | Confirms selections in menus. |
| INFO | Displays information about the current program or input. |
| ASPECT | Changes the screen aspect ratio (e.g., 16:9, 4:3, Zoom). |
| VOL (+/-) | Adjusts the volume level. |
| MUTE | Mutes or unmutes the TV audio. |
| CH (Up/Down) | Changes the TV channel. |
| CCD | Activates or deactivates Closed Captioning. |
| SLEEP | Sets a timer for the TV to automatically turn off. |
| FAVORITE | Accesses favorite channels list. |
| Playback Controls (Rewind, Play/Pause, Fast Forward, Previous, Stop, Next) | Controls media playback functions (e.g., for connected USB devices or DVRs). |
| PICTURE | Accesses picture settings (e.g., brightness, contrast). |
| AUDIO | Accesses audio settings (e.g., sound mode, balance). |
Maintenance
Cleaning the Remote
To clean your remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Storage
Store the remote control in a dry place, away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, it is advisable to remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working. | Dead or incorrectly installed batteries. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Remote not working. | Obstruction between remote and TV. | Ensure a clear line of sight between the remote's IR emitter and the TV's IR receiver. |
| Remote not working. | Remote is too far from the TV. | Move closer to the TV. The effective range is typically up to 20 feet (6 meters). |
| Specific buttons not responding. | Dirt or debris under the button. | Clean the remote control as described in the Maintenance section. |
Specifications
- Model: NS-RC4NA-14
- Brand: Insignia (Original Equipment Manufacturer)
- Connectivity Technology: Infrared (IR)
- Number of Buttons: 25
- Compatible Devices: Insignia LED, LCD HDTVs
- Power Source: 2 x AAA Batteries (not included)
- Compatible TV Models: NS-22E400NA14, NS-24E200NA14, NS-24E400NA14, NS-28E200NA14, NS-32D200NA14, NS-32E400NA14, NS-39D400NA14, NS-39E400NA14, NS-39L400NA14, NS-40D40SNA14, NS-46D400NA14, NS-46E440NA14, NS-50D400NA14, NS-50E440NA14, NS-50L440NA14, NS-55D440NA14
Warranty and Support
As this is a replacement remote control, specific warranty information from the original manufacturer may not apply directly to this unit. For any support or warranty inquiries regarding your purchase, please refer to the seller (TVACC) or the retailer from whom you acquired this product.
