Introduction
Thank you for choosing the Comfort Zone CZ6XMWT 6-inch 2-Speed Combo Clip or Desk Fan. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and retain it for future reference.
Important Safety Information
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always unplug the fan before cleaning or servicing.
- Do not operate the fan with a damaged cord or plug.
- Keep fingers and other objects away from the fan blades during operation.
- Ensure the fan is placed on a stable, level surface when used as a desk fan.
- When using the clip, ensure it is securely fastened to a sturdy surface.
- Do not use this fan near water or in excessively humid environments.
Product Features
- 2-Speed Control: Easily switch between low and high air output.
- Adjustable Tilt: Direct airflow up or down as needed.
- 360-Degree Rotation: Offers full rotation for precise airflow direction.
- Dual Base Options: Can be used as a clip-on fan or a desk fan with the included removable base.
- Compact and Portable: Lightweight design with a small footprint.
- Quiet Operation: Designed for minimal noise output.

Image: The Comfort Zone 6-inch fan demonstrating its versatility with both clip and desk base options.
Package Contents
- Comfort Zone CZ6XMWT Clip Desk Fan
- Power Cord
- Removable Desk Base
- Product Manual (this document)
Setup
Using as a Desk Fan:
- Ensure the fan is detached from the clip mechanism.
- Align the fan's mounting slot with the post on the removable desk base.
- Gently push down until the fan is securely seated on the base.
- Place the assembled fan on a flat, stable surface.
Using as a Clip Fan:
- Ensure the fan is detached from the removable desk base.
- Open the strong clamp by pressing the handles together.
- Attach the clamp securely to a sturdy surface such as a desk, shelf, or table edge. Ensure the grip is firm to prevent the fan from falling.

Image: The Comfort Zone 6-inch fan shown with its removable desk base, ready for tabletop use.

Image: A close-up of the Comfort Zone 6-inch fan demonstrating its clip-on functionality.
Operating Instructions
- Power Connection: Plug the fan's power cord into a standard 120V AC electrical outlet.
- Turn On/Off: Locate the slider switch on the back of the fan. Slide it to 'LO' for low speed, 'HI' for high speed, or 'OFF' to turn the fan off.
- Adjusting Airflow Direction:
- Tilt Adjustment: Loosen the thumbscrew on the side of the fan head, adjust the head to the desired vertical angle, and then tighten the thumbscrew to secure it.
- Rotation: The fan head can be manually rotated 360 degrees horizontally to direct air in any direction.

Image: Detailed views of the fan's features, including the handle, thumbscrew for tilt, and 360-degree rotation capability.

Image: Front and rear views of the fan, illustrating the slider switch for selecting low, high, or off settings.
Maintenance
Regular cleaning will help maintain your fan's performance and extend its lifespan.
- Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not immerse the fan in water or allow water to drip into the motor housing.
- Grille Cleaning: Use a vacuum cleaner with a brush attachment to remove dust from the grilles.
- Storage: When not in use, store the fan in a cool, dry place, preferably in its original packaging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply; Fan switch is OFF | Check power cord connection; Turn fan switch to 'LO' or 'HI' |
| Weak airflow | Fan speed set to low; Dust accumulation on grilles/blades | Increase fan speed; Clean grilles and blades |
| Unusual noise | Loose parts; Obstruction | Unplug and inspect for loose parts or obstructions; Ensure fan is on a stable surface. |
Specifications
- Model: CZ6XMWT
- Size: 6 inches
- Number of Speeds: 2
- Power Source: Corded Electric
- Voltage: 120V
- Wattage: 51 watts
- Noise Level: 42.7 Decibels
- Dimensions (D x W x H): 6.75"D x 6.88"W x 7.38"H
- Item Weight: 1.52 Pounds
- Material: Plastic (Blades and Housing)
- Installation Type: Stand alone, Clip-on
- Safety Certification: ETL
Official Product Videos
Comfort Zone Fan Lineup
Video: An overview of the Comfort Zone fan lineup, showcasing various models and their features.
6 inch Clip Fan
Video: A detailed look at the 6-inch clip fan, demonstrating its features and versatility.
Warranty and Support
This Comfort Zone fan comes with a 1 Year Warranty Against Manufacturer Defects. For warranty claims or technical support, please contact Mr. Brands, LLC., the manufacturer.
For further assistance, please refer to the contact information provided with your purchase documentation or visit the official Comfort Zone website.