1. Introduction
This manual provides detailed instructions for the assembly, configuration, care, and maintenance of your Poundex Bobkona Burril 4-Piece Reversible Sectional Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The Poundex Bobkona Burril sectional set offers a versatile and comfortable seating solution, featuring a contemporary design with tufted seats and back, and a durable linen-like fabric. Its modular design allows for flexible arrangement to suit your living space.
Image 1.1: Fully assembled Poundex Bobkona Burril Sectional Set.
2. Safety Information
- Always assemble the product on a soft, clean surface to prevent damage.
- Ensure all components are securely fastened before use. Periodically check and tighten all connections.
- Do not stand on the furniture.
- Keep small parts and packaging materials away from children.
- This furniture is designed for indoor residential use only.
- The maximum weight limit for this sectional is 1000 pounds. Do not exceed this limit.
- Assembly requires two people for safety and ease.
3. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Left Arm Facing Loveseat (1 unit)
- Corner Wedge (1 unit)
- Reversible Armless Chair (1 unit)
- Right Arm Facing Loveseat (1 unit)
- Furniture Legs (Quantity: Varies per piece, typically 4 per main piece)
- Interlocking Connectors (Pre-installed or included separately)
- Assembly Hardware (Bolts, washers, Allen wrench - if required for legs)
- Throw Pillows (2 units)
4. Assembly Instructions
Assembly is straightforward and requires two people. All necessary tools are included.
4.1. Unpacking and Preparation
- Carefully unpack all components from their boxes. Place them on a clean, soft surface like a carpet or blanket to prevent scratches.
- Identify each piece: Left Arm Facing Loveseat, Corner Wedge, Reversible Armless Chair, and Right Arm Facing Loveseat.
- Locate all hardware and furniture legs. Ensure no parts are missing by comparing with the package contents list.
4.2. Attaching Furniture Legs
Each sectional piece requires legs to be attached. The legs are typically stored within a zippered compartment underneath the seat cushions.
- Turn each sectional piece upside down.
- Locate the pre-drilled holes or mounting plates for the legs at the bottom corners of each piece.
- Screw each leg clockwise into its designated hole until securely tightened. Do not overtighten.
- Once all legs are attached, carefully turn each piece upright.
4.3. Connecting Sectional Pieces
The sectional pieces are designed to interlock, allowing for flexible left or right-hand configurations.
Image 4.1: Sectional dimensions and component layout.
- Determine your desired configuration (left-hand or right-hand facing). The armless chair is reversible and can be placed on either side of the corner wedge.
- Align the pieces you wish to connect side-by-side.
- Locate the interlocking connectors on the underside or sides of the sectional pieces. These are typically metal brackets designed to slide and lock together.
- Lift one piece slightly and guide its connector into the corresponding connector on the adjacent piece. Push down firmly until the pieces are securely interlocked.
- Repeat this process for all connecting pieces until the entire sectional is assembled.
Image 4.2: Assembled sectional, showing modular connections.
Image 4.3: Front view of the assembled sectional.
5. Configuration Options
The Poundex Bobkona Burril sectional is designed for flexibility. The 4-piece set includes a Left Arm Facing Loveseat, a Corner Wedge, a Reversible Armless Chair, and a Right Arm Facing Loveseat. The key to its reversibility is the armless chair, which can be positioned on either side of the corner wedge to create a left-hand or right-hand facing L-shape.
- Left-Hand Facing Configuration: Place the Left Arm Facing Loveseat, then the Corner Wedge, followed by the Armless Chair, and finally the Right Arm Facing Loveseat.
- Right-Hand Facing Configuration: Place the Right Arm Facing Loveseat, then the Corner Wedge, followed by the Armless Chair, and finally the Left Arm Facing Loveseat.
You can easily change the configuration by disengaging the interlocking connectors and rearranging the pieces as desired.
6. Care and Maintenance
Proper care will extend the life and appearance of your sectional.
- General Cleaning: For routine cleaning, vacuum the fabric regularly using an upholstery attachment to remove dust and loose debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner specifically designed for polyester blend upholstery. Test the cleaner on an inconspicuous area first.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading. Position your sectional away from direct sunlight or use window coverings.
- Avoid Harsh Chemicals: Do not use harsh detergents, abrasive cleaners, or solvents, as these can damage the fabric.
- Cushion Care: Rotate and fluff cushions periodically to maintain their shape and even out wear.
- Frame Care: Periodically check and tighten all leg and connector bolts to ensure stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sectional pieces are not aligning or connecting properly. | Connectors are not fully engaged or misaligned. | Ensure pieces are on a level surface. Realign connectors and push down firmly until they click into place. Check for any obstructions. |
| Wobbly or unstable sectional. | Loose legs or connectors. Uneven floor. | Check and tighten all furniture legs and interlocking connectors. If the floor is uneven, use furniture glides or shims under the legs. |
| Squeaking noises. | Loose connections or friction between components. | Tighten all bolts and connectors. If squeaking persists, identify the source and ensure no parts are rubbing incorrectly. |
| Fabric appears wrinkled or creased. | Normal during shipping or initial use. | Lightly steam the fabric from a distance or allow time for wrinkles to naturally relax with use. Do not apply direct heat. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | F6939-P |
| Brand | Poundex |
| Type | 4-Piece Modular Sectional Set |
| Color | Navy |
| Overall Dimensions (W x D x H) | 107" x 84" x 35" (approximate, as configured) |
| Item Weight | 183 pounds |
| Seating Capacity | 5 |
| Weight Limit | 1000 pounds |
| Upholstery Fabric Type | Polyester Blend |
| Frame Material Type | Particle Board |
| Seat Fill Material | Foam with Inner Spring |
| Cushion Construction | Tufted foam for seat and back |
| Assembly Required | Yes, 2 people recommended |
| Included Components | 4 Sectional Pieces, 2 Throw Pillows |
9. Warranty and Support
Poundex provides a manufacturer's warranty for this product, which typically covers manufacturing defects. Specific details regarding the warranty period and coverage for the frame and other components can be found on the product's original purchase page or by contacting Poundex customer service.
For warranty claims, missing parts, or technical assistance, please contact Poundex customer support directly. Have your model number (F6939-P) and proof of purchase ready.
Manufacturer Warranty Type: Frame Warranty
Contact Information: Please refer to the retailer's website or your purchase documentation for the most current customer support contact details for Poundex.