Timex TW2P87900

Timex Intelligent Quartz TW2P87900 Watch User Manual

Your guide to setup, operation, and care.

Introduction

Congratulations on your purchase of the Timex Intelligent Quartz TW2P87900 watch. This timepiece combines classic analog design with advanced quartz technology, offering reliable timekeeping and unique features. This manual provides essential information to help you set up, operate, and maintain your watch for optimal performance and longevity.

Safety Information

  • Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
  • Do not attempt to open the watch case or replace the battery yourself, as this may void the warranty and damage the watch. Consult a qualified watch technician.
  • Keep the watch out of reach of small children to prevent accidental ingestion of small parts.
  • Clean the watch with a soft, dry cloth. Avoid using chemical cleaners or abrasive materials.

Setup

Setting the Time

  1. Pull the crown (the knob on the side of the watch) out to the furthest position.
  2. Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
  3. Once the time is set, push the crown back into its original position to start the watch.
Side view of the Timex TW2P87900 watch showing the crown and pushers.

A side profile of the watch case, highlighting the main crown for time setting and two additional pushers, likely for chronograph or other Intelligent Quartz functions. The case features a combination of polished and brushed finishes.

Battery Information

Your Timex TW2P87900 watch is powered by a single LR44 battery, which is included and pre-installed. The battery life varies depending on usage, especially the frequency of backlight activation. When the watch stops or the backlight dims significantly, it's an indication that the battery needs replacement. We recommend having the battery replaced by an authorized Timex service center or a professional watch repairer to ensure proper sealing and functionality.

Operating Instructions

Basic Timekeeping

Once the time is set as described in the 'Setup' section, your watch will accurately display the current time. The quartz movement ensures precise timekeeping with minimal deviation.

Using the INDIGLO® Night-Light

Your Timex Intelligent Quartz watch features the INDIGLO® night-light for easy readability in low-light conditions. To activate the backlight, simply press the crown firmly inwards. The light will illuminate the dial for a few seconds. Frequent use of the INDIGLO® feature will consume battery power more quickly.

Maintenance

Cleaning Your Watch

  • Wipe the watch case and crystal with a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water.
  • For the leather strap, avoid excessive moisture. If it gets wet, allow it to air dry naturally, away from direct heat or sunlight.

Water Resistance

While your watch is designed for daily wear, it is important to note its water resistance rating. Avoid submerging the watch in water or exposing it to high-pressure water streams unless specifically stated otherwise in the specifications. Always ensure the crown is fully pushed in before any contact with water.

Strap Care

The leather strap on your Timex watch is a natural material and will develop a unique patina over time. To prolong its life, avoid prolonged exposure to water, sweat, and direct sunlight. Clean with a dry, soft cloth. If the strap becomes stiff or cracked, consider replacing it.

Close-up of the Timex TW2P87900 watch's beige leather strap with a silver buckle.

This image displays the detailed texture of the watch's genuine leather strap, featuring a classic buckle closure. The strap is designed for comfort and durability.

Troubleshooting

  • Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
  • Time Inaccuracy: Ensure the crown is fully pushed in after setting the time. If the watch consistently runs fast or slow, it may require servicing.
  • INDIGLO® Not Working: This is often an indication of a low battery. Replace the battery as recommended.
  • Condensation Under Crystal: If you notice condensation, it may indicate a breach in the watch's water resistance. Have the watch inspected by a professional immediately.

For issues not covered here, please contact Timex customer support.

Specifications

Model Number TW2P87900
Brand Timex Intelligent Quartz
Display Format Analog
Movement Type Quartz
Special Features INDIGLO® Night-Light
Power Source Battery (1 x LR44, included)
Case Material Stainless Steel
Strap Material Leather
Crystal Type Mineral
Dial Color White
Case Diameter 44.00 mm
Case Thickness 12.00 mm
Strap Width 20.00 mm
Product Dimensions 1 x 1 x 1 cm; 4.54 g (approximate)

Warranty and Support

Your Timex Intelligent Quartz TW2P87900 watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the duration and coverage details. For technical support, service, or warranty claims, please visit the official Timex website or contact their customer service department directly. Keep your proof of purchase for warranty validation.

For further assistance, you may visit the official Timex website: www.timex.com

© 2023 Timex. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.