Primus TrailBreak P737947 Lunch Jug 400 User Manual

Product Overview

The Primus TrailBreak P737947 Lunch Jug 400 is a versatile and durable insulated container designed for keeping food and beverages hot or cold. Its robust construction and efficient insulation make it ideal for outdoor activities, travel, or daily use, ensuring your meals maintain their desired temperature for extended periods.

Image: The Primus TrailBreak P737947 Lunch Jug 400, showcasing its barn red color and compact design. The Primus logo is visible on the side.

Safety Information

• Hand Wash Only: This product is not dishwasher safe. Always hand wash with warm soapy water.
• Not Microwaveable: Do not place the lunch jug in a microwave oven.
• Avoid Freezing: Do not place the jug in a freezer, as this may damage the insulation properties.
• Hot Contents Warning: When filled with hot liquids or food, the jug's contents will be hot. Exercise caution when opening and consuming to prevent burns.
• Secure Lid: Always ensure the screw cap is tightly closed to prevent leaks and maintain temperature.
• Food Safety: For perishable foods, consume within a safe timeframe, especially in warm environments, as the jug is designed for temperature retention, not indefinite preservation.

Components

The Primus TrailBreak Lunch Jug consists of the following main components:

• Insulated Body: The main container, constructed from durable stainless steel with double-wall vacuum insulation.
• Screw Cap: A secure, leak-proof lid designed to seal the contents and enhance thermal retention.

Setup

Before first use, and after each use, clean the lunch jug thoroughly according to the maintenance instructions.

1. Pre-heat/Pre-cool (Optional but Recommended): For optimal temperature retention, pre-heat the jug with hot water or pre-cool with cold water for 5-10 minutes before adding your food.
   • For hot food: Fill the jug with boiling water, close the lid, and let it sit. Empty the water before adding food.
   • For cold food: Fill the jug with ice water, close the lid, and let it sit. Empty the water before adding food.
2. Fill with Food/Liquid: Carefully fill the jug with your desired hot or cold food or liquid. Do not overfill; leave a small space at the top for the lid.
3. Secure the Lid: Screw the cap on tightly to ensure a complete seal.

Operating

Using your Primus TrailBreak Lunch Jug is straightforward:

1. Transport: Carry the sealed jug in an upright position to prevent any potential leaks, although the screw cap is designed to be leak-proof.
2. Opening: To open, unscrew the cap counter-clockwise. Be cautious if the contents are hot, as steam may escape.
3. Serving: The wide mouth of the jug allows for easy eating directly from the container or pouring contents into a bowl.
4. Re-sealing: After use, or if you are not finished with the contents, screw the cap back on tightly to maintain temperature.

Maintenance

Proper care will extend the life and performance of your lunch jug:

• Cleaning:
  • Wash the jug and lid by hand with warm water and mild dish soap.
  • Use a bottle brush for thorough cleaning of the interior.
  • Rinse thoroughly with clean water.
  • Allow all parts to air dry completely before reassembling or storing to prevent odors and mildew.
• Deep Cleaning: For stubborn stains or odors, a mixture of baking soda and warm water can be used. Let it sit for a few hours or overnight, then rinse thoroughly.
• Storage: Store the jug with the lid slightly ajar to allow air circulation and prevent odors.
• Avoid Abrasives: Do not use abrasive cleaners, bleach, or scrubbers that could scratch the finish or damage the insulation.

Troubleshooting

Specifications

Warranty and Support

For warranty information or product support, please contact Primus customer service. Keep your purchase receipt as proof of purchase.

Visit the official Primus website for the most up-to-date support information and contact details: www.primus.eu