KT Porlex Mini Coffee Hand Grinder Instruction Manual

1. Introduction

Welcome to your KT Porlex Mini Coffee Hand Grinder. This manual provides essential instructions for the safe and efficient use, setup, operation, and maintenance of your new coffee grinder. Please read this manual thoroughly before first use and retain it for future reference.

Figure 1: The KT Porlex Mini Coffee Hand Grinder ready for use, alongside roasted coffee beans.

2. Product Components

Your KT Porlex Mini Coffee Hand Grinder consists of several key parts designed for optimal performance and ease of use. Familiarize yourself with each component before assembly and operation.

Figure 2: All disassembled components of the Porlex Mini Coffee Hand Grinder, including the main body, handle, ceramic burrs, and collection container.

• Main Body: Stainless steel housing that contains the grinding mechanism and bean hopper.
• Handle: Detachable metal handle with a comfortable knob for manual grinding.
• Ceramic Burrs: High-quality tapered ceramic grinding mechanism for consistent and precise grinding.
• Grind Adjustment Nut: A star-shaped nut located at the bottom of the burr assembly used to adjust the fineness of the grind.
• Collection Container: The bottom cup that screws onto the main body to collect ground coffee.
• Rubber Sleeve: A silicone band around the main body that provides grip and a convenient storage spot for the handle during travel.

3. Setup

Follow these steps to prepare your grinder for its first use.

1. Unpack: Carefully remove all components from the product packaging.
2. Initial Cleaning: Before first use, disassemble the grinder (refer to the 'Product Components' and 'Maintenance' sections for guidance). Wash all parts, except the main stainless steel body, with warm, soapy water. Rinse thoroughly and ensure all components are completely dry before reassembly. The main body can be wiped clean with a damp cloth.
3. Assemble: Reassemble the grinder, ensuring the ceramic burrs are correctly seated and the grind adjustment nut is securely in place.
4. Attach Handle: Place the handle onto the square shaft at the top of the grinder.

Figure 3: The fully assembled KT Porlex Mini Coffee Hand Grinder with the handle attached, ready for coffee beans.

4. Operation

4.1 Adjusting Grind Size

The Porlex Mini offers a wide range of grind settings, suitable for various brewing methods from fine espresso to coarse French press. Adjust the grind fineness by turning the adjustment nut at the bottom of the burr assembly.

1. Access Adjustment Nut: Unscrew the collection container to access the grind adjustment nut.
2. Adjust: Turn the star-shaped grind adjustment nut clockwise for a finer grind and counter-clockwise for a coarser grind. Each 'click' represents a step in grind size.
3. Test Grind: Perform a small test grind to verify the desired fineness before grinding a full batch of beans.

Figure 4: A close-up view of the grind adjustment mechanism at the bottom of the ceramic burr assembly, showing the star-shaped nut used to change grind fineness.

4.2 Grinding Coffee

Once the desired grind size is set, you can proceed with grinding your coffee beans.

1. Add Beans: Open the top lid and pour whole coffee beans into the hopper. The bean container has a capacity of approximately 20g of beans.
2. Attach Handle: Securely attach the handle to the grinder shaft.
3. Grind: Hold the grinder firmly with one hand and turn the handle clockwise with the other to begin grinding. Continue turning until all beans have passed through the burrs and no resistance is felt.
4. Collect Grounds: Unscrew the bottom collection container to retrieve your freshly ground coffee. The collection container holds approximately 30g of ground coffee.

Figure 5: The KT Porlex Mini Coffee Hand Grinder with its handle attached, demonstrating how it appears during the grinding process.

5. Maintenance and Cleaning

Regular cleaning is crucial for maintaining optimal performance, preventing clogs, and ensuring the longevity of your grinder.

1. Disassemble: Remove the handle, unscrew the bottom collection container, and carefully remove the inner ceramic burr and spring assembly.
2. Clean Burrs: Use a small brush (a stiff toothbrush works well) or a dry cloth to remove any residual coffee grounds from the ceramic burrs and the inside of the main body.
3. Wash Components: Wash the collection container, handle, and ceramic burrs with warm, soapy water. Important: Do not wash the main stainless steel body with water; wipe it clean with a damp cloth if necessary, then dry immediately.
4. Dry Thoroughly: Ensure all washed parts are completely dry before reassembly to prevent rust or mold growth. Air dry or use a clean towel.
5. Reassemble: Carefully reassemble all components in reverse order of disassembly. Ensure the burrs are properly aligned.

6. Troubleshooting

If you encounter any issues with your grinder, refer to the table below for common problems and solutions.

For issues not listed or if problems persist, please contact customer support.

7. Specifications

• Model: 34570007
• Brand: KT
• Material: Stainless Steel body, Ceramic burrs
• Dimensions: Height: 13.5 cm (approx. 5.3 inches), Diameter: 4.6 cm (approx. 1.8 inches)
• Bean Capacity: Approximately 20g
• Ground Coffee Capacity: Approximately 30g
• Grind Settings: Multiple adjustable settings for various brewing methods
• Power Source: Manual
• Item Weight: 0.55 Pounds (approx. 250g)

8. Warranty and Support

For detailed warranty information or technical support, please refer to the warranty card included with your product. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.

Contact Information:

• Brand: KT
• Online Store: KT Official Store on Amazon