Empire 356833-EM-CPH-464D

Empire Cordless Phone Battery User Manual

Model: 356833-EM-CPH-464D

Introduction

This manual provides essential instructions for the safe and effective use of your Empire Ni-MH 3.6V, 700 mAh Cordless Phone Battery, designed for compatibility with GE 28111EE2 cordless phone models. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery.

Setup and Installation

Unpacking

Carefully remove the battery from its packaging. Inspect the battery for any visible damage. If damage is observed, do not proceed with installation and contact your retailer.

Battery Installation

  1. Locate the Battery Compartment: On your GE 28111EE2 cordless phone handset, identify and open the battery compartment cover. This is typically located on the back of the handset.
  2. Remove Old Battery (if applicable): If replacing an old battery, carefully disconnect its connector from the phone's battery terminal and remove the old battery.
  3. Connect New Battery: Align the connector of the Empire replacement battery with the battery terminal inside the phone's compartment. Gently push until it clicks securely into place. Ensure the polarity is correct.
  4. Position Battery: Place the new battery into the compartment, ensuring it fits snugly without forcing.
  5. Close Compartment: Replace the battery compartment cover, ensuring it is securely latched.

Initial Charging

After installation, place the phone handset on its charging base. Allow the battery to charge continuously for at least 12-16 hours before its first use, even if the phone indicates a full charge sooner. This initial charge is crucial for conditioning the Ni-MH battery and achieving its full capacity.

Operating Instructions

Regular Charging

For optimal battery life, return the handset to its charging base when not in use. Ni-MH batteries do not suffer from a 'memory effect' as severely as older Ni-Cd batteries, but consistent charging habits help maintain performance.

Battery Discharge

It is generally beneficial to allow the battery to fully discharge occasionally (e.g., once every few months) before performing a full recharge cycle. This can help recalibrate the phone's battery indicator and maintain battery health.

Maintenance

Storage

If the battery will not be used for an extended period, store it in a cool, dry place. It is recommended to charge the battery to about 50% capacity before long-term storage and recharge it every 3-6 months to prevent deep discharge.

Cleaning

Keep the battery contacts on both the battery and the phone clean. Use a dry, soft cloth to gently wipe away any dust or debris. Do not use liquid cleaners.

Disposal

Do not dispose of batteries in household waste. Ni-MH batteries contain recyclable materials. Please dispose of the battery responsibly at a local recycling center or according to local regulations for battery disposal.

Troubleshooting

If troubleshooting steps do not resolve the issue, consult your phone's user manual or contact the phone manufacturer's support.

Specifications

FeatureSpecification
BrandEmpire
Model Number356833-EM-CPH-464D
Battery Cell CompositionNiMH
Voltage3.6V
Battery Capacity700 mAh
Item Weight5.3 ounces
Product Dimensions2 x 2 x 2 inches
Recommended UseCordless Phone
Unit Count1 Count

Warranty and Support

For specific warranty information regarding your Empire Cordless Phone Battery, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. Support inquiries should be directed to the point of purchase or the Empire customer service channels.

Important Notes on Media

No relevant product images for the Empire Cordless Phone Battery were found in the provided data. The image provided depicted a USB charging cable and a smartphone, which is not applicable to this product. Therefore, no images have been embedded.

No official product videos were found in the provided data to embed in this manual.

Related Documents - 356833-EM-CPH-464D

Preview EMPIRE SR-18T-4, SR-10T-4, SR-30T-4 Unvented Room Heater: Installation Instructions and Owner's Manual
Comprehensive installation instructions and owner's manual for the EMPIRE SR-18T-4, SR-10T-4, and SR-30T-4 unvented room heaters. Covers safety warnings, specifications, gas supply, installation procedures, operation, maintenance, troubleshooting, and parts lists.
Preview Empire DVCTL60 Liner Kit Installation Instructions | Empire Comfort Systems
Step-by-step guide to installing the Empire DVCTL60 gas-fired fireplace liner kit (model DVP60TLKR). Includes carton contents, tools needed, removal and installation procedures, and parts list.
Preview EMPIRE DV-35-4SG Direct Vent Wall Furnace Owner's Manual & Installation Guide
Official owner's manual and installation guide for the EMPIRE DV-35-4SG and DV-25-5SG Direct Vent Wall Furnace by Empire Comfort Systems Inc. Covers safety, installation, operation, maintenance, and troubleshooting.
Preview Empire Gateway 3500 Wood Stove (WB35FS) Installation & Operation Manual
Comprehensive installation and operation manual for the Empire Gateway 3500 wood stove (model WB35FS). This guide provides detailed instructions for safe installation, efficient burning, and maintenance of this EPA Phase II certified, UL/ULC listed appliance. Learn about specifications, clearances, and optimal use for your Empire Comfort Systems wood-burning stove.
Preview Empire DVC35 Series Direct-Vent Wall Furnace Installation and Owner's Manual
Comprehensive installation instructions and owner's manual for the EMPIRE DVC35 series direct-vent wall furnaces. Covers safety, installation, operation, and maintenance for models like DVC35SPPXLP-1 and DVC35IPXNAT-1.
Preview Empire FBB5-1 Blower Kit Installation Instructions
Detailed installation guide for the Empire FBB5-1 Blower Kit, including wiring, model-specific instructions, maintenance, and ordering information for Empire Comfort Systems fireplaces.