NGS WILDFUNKY Bluetooth Speaker User Manual

Introduction

The NGS WILDFUNKY is a versatile portable audio system designed for enjoying music from your smartphone, tablet, or laptop via Bluetooth. It also offers direct 3.5mm auxiliary connection, USB, and Micro SD card playback. Featuring an integrated battery for approximately 4 hours of autonomy, an LED display, and controls for volume, bass, and echo, this speaker is equipped with wheels and a retractable handle for easy transport. A microphone is included for speeches or singing.

Package Contents

• NGS WILDFUNKY Bluetooth Speaker
• Microphone
• User Manual (this document)
• 2-Year Warranty Card

Setup

1. Charging the Speaker

Before first use, fully charge the speaker's integrated battery. Connect the power adapter to the speaker's DC IN port and then to a power outlet (AC 230V - 50Hz). The LED indicator will show the charging status. A full charge provides approximately 4 hours of playback.

2. Powering On/Off

Locate the power switch on the back panel of the speaker. Flip the switch to the "ON" position to power on the device. The LED display will light up. To power off, flip the switch to the "OFF" position.

3. Retractable Handle and Wheels

For easy transport, extend the retractable handle by pulling it upwards. The speaker is equipped with wheels, allowing you to roll it like a trolley. Push the handle down to retract it when not in use.

Figure 1: NGS WILDFUNKY speaker with its retractable handle extended for portability.

Figure 2: Side view of the NGS WILDFUNKY speaker, illustrating the extended handle and wheels.

Operating Instructions

Figure 3: Control Panel of the NGS WILDFUNKY speaker.

1. Control Panel Overview

The control panel, located on the top/rear of the speaker, features various inputs and adjustment knobs:

• AUX IN: 3.5mm audio input for external devices.
• USB: Port for USB flash drives.
• TF (Micro SD): Slot for Micro SD cards.
• VOLUME: Master volume control knob.
• TREBLE: Adjusts high-frequency sounds.
• MIC VOL: Adjusts microphone volume.
• ECHO: Adjusts echo effect for the microphone.
• MIC: 6.35mm input for the included microphone.
• LED Display: Shows current mode, track number, or FM frequency.
• Mode Button: Switches between Bluetooth, USB, Micro SD, AUX, and FM Radio modes.
• Repeat Button: Controls playback repeat functions.
• Playback Controls: Play/Pause, Previous Track, Next Track.

2. Bluetooth Connection

1. Power on the NGS WILDFUNKY speaker.
2. Press the Mode button until "Bluetooth" or "BT" appears on the LED display. The speaker will enter pairing mode, indicated by a flashing Bluetooth icon or sound.
3. On your smartphone, tablet, or PC, enable Bluetooth and search for available devices.
4. Select "NGS WILDFUNKY" from the list of devices.
5. Once paired, the speaker will confirm the connection, and the Bluetooth indicator will stop flashing. You can now play audio from your device through the speaker.

3. USB / Micro SD Playback

1. Insert a USB flash drive or a Micro SD card (with MP3, RealAudio, or WMA files) into the respective port (USB or TF).
2. The speaker should automatically switch to USB or TF mode and begin playing music. If not, press the Mode button to select the correct input.
3. Use the playback controls (Play/Pause, Previous/Next Track) to manage your music.

4. AUX Input

1. Connect one end of a 3.5mm audio cable (not included) to the AUX IN port on the speaker.
2. Connect the other end of the cable to the audio output jack of your external device (e.g., MP3 player, non-Bluetooth laptop).
3. Press the Mode button to select "AUX" mode.
4. Play audio from your external device. Adjust volume using both the speaker's VOLUME knob and your device's volume controls.

5. FM Radio

1. Press the Mode button to switch to "FM Radio" mode.
2. The speaker will automatically scan and save available FM stations.
3. Use the Previous/Next Track buttons to navigate between saved stations.

6. Microphone Usage

1. Plug the included microphone into the MIC input jack.
2. Adjust the microphone volume using the MIC VOL knob.
3. Use the ECHO knob to add an echo effect to your voice.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in use for extended periods.
• Water Exposure: This speaker is not waterproof. Avoid exposing it to water or excessive moisture.

Troubleshooting

No Power:

Ensure the speaker is fully charged or connected to a power source. Check the power switch is in the "ON" position.

No Sound:

Check the volume level on both the speaker and your connected device. Ensure the correct input mode (Bluetooth, AUX, USB, TF, FM) is selected. Verify audio cables are securely connected.

Bluetooth Not Connecting:

Ensure the speaker is in Bluetooth pairing mode. Make sure Bluetooth is enabled on your device and it's within range (typically 10 meters). Try unpairing and re-pairing the device. Restart both the speaker and your Bluetooth device.

Poor FM Radio Reception:

Try repositioning the speaker to improve signal reception. Environmental factors can affect FM signal quality.

Microphone Not Working:

Ensure the microphone is securely plugged into the MIC input. Adjust the MIC VOL knob. Test with another microphone if available to rule out a faulty microphone.

Specifications

Warranty Information

The NGS WILDFUNKY Bluetooth speaker comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase and the included warranty card for any warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Support

For further assistance, technical support, or information regarding your NGS WILDFUNKY speaker, please visit the official NGS website or contact their customer service department. Refer to the warranty card or product packaging for specific contact details in your region.

You can also find more information on the NGS Brand Store on Amazon.