Nerf Modulus Tri-Strike Blaster Instruction Manual

Product Overview

The Nerf Modulus Tri-Strike blaster offers three distinct ways to engage in play, allowing for versatile customization. It can be used as separate components or combined into a single, powerful blaster system.

Image: The complete Nerf Modulus Tri-Strike Blaster system, showcasing the main blaster, Mega barrel, rocket launcher, Elite darts, Mega darts, and a foam rocket.

What's Included:

• Elite dart blaster
• Mega dart barrel
• Rocket launcher
• 10 Elite darts
• 10-dart clip
• 4 Mega darts
• 1 foam rocket
• Bolt (2 pieces)
• Instructions

Setup and Assembly

The Nerf Modulus Tri-Strike blaster is designed for modular assembly, allowing you to configure it in various ways. Follow these steps to assemble your blaster system.

Assembling the Rocket Launcher:

The rocket launcher component can be used independently or attached to the main blaster. To assemble it as a standalone unit:

1. Locate the two orange buttons on the sides of the main blaster's stock attachment point. Press both buttons simultaneously.
2. Pull the stock piece away from the main blaster.
3. Locate the top part of the rocket launcher (the scope-like attachment). Pull it forward to detach it from the main blaster.
4. Connect the stock piece to the top part of the rocket launcher. Ensure they click securely into place.
5. To fire, pull back the handle on the stock and then push it forward to launch a foam rocket.

Image: Detaching the rocket launcher stock from the main blaster by pressing the orange release buttons.

Image: Connecting the rocket launcher stock and barrel to form a separate launcher unit.

Attaching the Mega Barrel:

The Mega barrel attaches to the front of the main blaster. It features four barrels for Mega darts.

1. Align the Mega barrel with the front attachment point of the main blaster.
2. Twist and push the Mega barrel onto the main blaster until it locks securely.
3. To fire, load Mega darts into the barrels. Grab the gray part of the barrel, push up, and pull back to launch a dart.

Image: Attaching the Nerf Mega barrel extension to the front of the main blaster.

Full Blaster Assembly:

To combine all components into the full Tri-Strike configuration, attach the Mega barrel to the front of the main blaster and the rocket launcher assembly to the rear stock attachment point.

Image: The Nerf Modulus Tri-Strike Blaster fully assembled, showcasing all three components combined.

Visual Assembly Guide:

For a visual demonstration of assembly and operation, please refer to the official product video below:

Operating Instructions

The Nerf Modulus Tri-Strike blaster offers three distinct firing modes, each utilizing different ammunition types.

1. Elite Dart Blaster (Main Blaster):

This is the core component of the Tri-Strike system, firing Elite darts from a 10-dart clip.

1. Insert the 10-dart clip into the magazine well of the main blaster.
2. Pull the orange bolt handle back until it clicks, then push it forward to prime the blaster.
3. Press the trigger to fire an Elite dart.
4. For rapid firing (Slam-Fire), hold down the trigger and repeatedly pull the bolt handle back and forth.

Image: Loading Elite darts into the transparent 10-dart clip.

2. Mega Dart Blaster (Barrel Attachment):

This attachment fires larger Mega darts and can be used when attached to the main blaster.

1. Load up to 4 Mega darts into the barrels of the Mega attachment.
2. To fire, firmly pull the gray handle on the underside of the Mega barrel upwards and then push it down. This action launches a Mega dart.

Image: Loading a Mega dart into one of the four barrels of the Mega barrel extension.

3. Rocket Launcher (Stock Attachment):

The rocket launcher fires a single foam rocket and can be used attached to the main blaster or as a standalone unit.

1. Load one foam rocket into the front of the rocket launcher barrel.
2. To fire, pull the stock handle back firmly and then push it forward to launch the rocket.

Image: Loading a foam rocket into the rocket launcher attachment.

Image: Visual representation of the three distinct blasting modes: Elite Dart Blaster, Mega Dart Blaster, and Rocket Launcher.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Nerf Modulus Tri-Strike blaster and its ammunition.

Dart Care:

• Store darts in a cool, dry place away from direct sunlight to prevent material degradation.
• Avoid bending or crushing darts, as this can affect their flight path and cause jams.
• Replace old or damaged darts. Worn darts may not fire consistently or can lead to blaster jams.

Blaster Cleaning:

• Wipe down the blaster with a dry or slightly damp cloth to remove dust and debris.
• Do not submerge the blaster in water or use harsh cleaning chemicals.

Troubleshooting

If you encounter issues with your Nerf Modulus Tri-Strike blaster, refer to these common troubleshooting tips.

Dart Jams:

Dart jams can occur, especially with worn darts or improper loading. To clear a jam:

1. Ensure the blaster is not primed.
2. Remove the magazine by pulling back on the magazine release lever (located near the trigger guard). The magazine should fall out.
3. Open the jam access door on the top of the blaster.
4. Carefully remove any jammed darts or debris from the internal mechanism. Ensure the path is clear.
5. Close the jam access door securely.
6. Reinsert the magazine and re-prime the blaster before attempting to fire again.

Note: Using new, undamaged darts can significantly reduce the frequency of jams.

Specifications

Warranty and Support

For detailed warranty information, please refer to the documentation included with your product at the time of purchase. Warranty terms and conditions may vary.

For product support, replacement parts, or further inquiries, please contact Hasbro customer service directly. You can typically find contact information on the product packaging or on the official NERF/Hasbro website.

Always ensure to use official NERF darts and accessories to maintain product performance and safety.