Instruction Manual

1. Product Overview

The All Balls Racing 25-1122 Wheel Bearing Seal Kit is designed to provide smooth and reliable operation for your vehicle's wheels. This kit includes high-quality components engineered to withstand demanding conditions, ensuring optimal performance and longevity. Wheel bearings are critical for the smooth rotation of your wheels, connecting the hubs to the axle. Proper maintenance and timely replacement are essential for safe and efficient machine operation.

Image: Components of the All Balls Racing Wheel Bearing and Seal Kit, including two bearings and three seals.

2. What's in the Box

Each All Balls Racing 25-1122 Wheel Bearing Seal Kit contains the following components:

• 2 x Ball Bearings
• 3 x Seals

Image: The All Balls Racing Wheel Bearing and Seal Kit in its clear plastic packaging, showing the model number and compatibility information.

3. Key Features

• High-Speed Bearings: Manufactured to ABEC 3 precision levels for optimal performance.
• Enhanced Sealing: Triple lip rubber seals are designed to effectively keep grease in and prevent water and dirt from entering.
• Corrosion Protection: Chevron SRI 2 grease, included with the bearings, contains rust and oxidation inhibitors, ensuring durability across a wide temperature range (-29°C to 177°C).
• Durable Seals: Double lip type TC Nitrile Elastomer seals feature stainless steel garter springs, specifically designed to resist water and dirt ingress.

Image: A close-up view of an All Balls Racing wheel bearing, highlighting its sealed design and precision finish.

4. Applications and Compatibility

This wheel bearing and seal kit is compatible with a range of Honda and Suzuki models. Please verify part fitment for your specific vehicle before installation.

Honda Applications:

• ATC110: 1979 - 1985
• ATC125M: 1984 - 1985
• ATC185: 1980 - 1983
• ATC200: 1981 - 1983
• ATC200E: 1982 - 1983
• ATC200M: 1984 - 1985
• ATC200S: 1984 - 1986
• ATC200X: 1983 - 1985
• ATC250R: 1981 - 1984
• TRX125: 1985 - 1986

Suzuki Applications:

• ALT-125: 1983 - 1986
• ALT-185F: 1985
• LT-125: 1983 - 1987
• LT-160: 2003 - 2004
• LT-160E: 1989 - 1992
• LT-185: 1984 - 1987
• LT-F160: 1991 - 2001

5. Installation Guidelines

Proper installation of wheel bearings and seals is crucial for the safety and performance of your vehicle. Incorrect installation can lead to premature failure and potential damage. It is highly recommended that installation be performed by a qualified mechanic or an individual with extensive experience in vehicle maintenance.

General Steps (Consult Service Manual for Specifics):

1. Preparation: Secure the vehicle on a stable lift or jack stands. Remove the wheel, brake caliper (if applicable), and any other components obstructing access to the wheel hub.
2. Removal of Old Components: Carefully remove the old wheel bearings and seals. Note their orientation and position for correct reassembly. Specialized tools may be required for extraction.
3. Cleaning: Thoroughly clean the hub and axle components, removing all old grease, dirt, and debris. Inspect for any damage or wear.
4. Installation of New Bearings: Press the new bearings into the hub using appropriate bearing installation tools. Ensure they are seated squarely and fully without applying force to the inner race.
5. Installation of New Seals: Install the new seals, ensuring they are properly oriented and seated to provide an effective barrier against contaminants.
6. Lubrication: Ensure adequate lubrication with the provided Chevron SRI 2 grease or equivalent, as specified in your vehicle's service manual.
7. Reassembly: Reassemble all removed components in reverse order. Torque all fasteners to the manufacturer's specifications.
8. Final Check: After reassembly, rotate the wheel by hand to check for smooth operation and any unusual noises. Check for any play in the wheel.

Warning: Improper installation can lead to serious mechanical failure. Always refer to your vehicle's specific service manual for detailed instructions and torque specifications.

6. Maintenance

Regular inspection and proper maintenance are key to extending the life of your wheel bearings and seals. Contamination from dirt and water is a primary cause of bearing failure.

• Regular Inspection: Periodically check for any signs of wear, such as excessive play in the wheel, grinding noises, or unusual heat from the hub area.
• Cleaning Practices: When washing your vehicle, avoid directing high-pressure water streams directly at the wheel bearing and seal areas, as this can force water past the seals and into the bearings.
• Lubrication: While these bearings are pre-greased, ensure seals remain intact to retain the Chevron SRI 2 grease, which is formulated with rust and oxidation inhibitors for long-term protection.
• Timely Replacement: Replace bearings and seals at recommended service intervals or at the first sign of wear or damage to prevent more extensive and costly repairs.

7. Troubleshooting

If you experience issues after installing your wheel bearing and seal kit, consider the following common problems and solutions:

If issues persist, consult a professional mechanic.

8. Specifications

9. Warranty and Support

All Balls Racing products are manufactured to high standards. For specific warranty information or technical support regarding your 25-1122 Wheel Bearing Seal Kit, please contact All Balls Racing directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.

For more information about All Balls Racing and their product lines, you can visit their official store: All Balls Racing Store.