1. Product Overview
The Portwest FR02 Bizflame Flame Resistant Henley Long Sleeve Sweatshirt is designed to provide protection against convective, radiant, and contact heat in hazardous environments. This garment is constructed from a smooth, high-performance interlock knit fabric, available in 100% FR cotton or a 99% cotton, 1% carbon fiber blend. It offers superior strength and a lightweight feel, ensuring both protection and comfort.
Key features include:
- Protection against convective, radiant, and contact heat.
- Bizflame Knit fabric: 100% Cotton 237g or 99% Cotton, 1% Carbon Fiber.
- Designed for durability, comfort, and style in demanding work conditions.
Figure 1: Front view of the Portwest FR02 Bizflame Flame Resistant Henley Long Sleeve Sweatshirt.
Figure 2: Back view of the Portwest FR02 Bizflame Flame Resistant Henley Long Sleeve Sweatshirt.
2. Setup and Proper Wearing
Before wearing, ensure the garment is clean and free from damage. Select the correct size to ensure full protective coverage and comfort. The shirt should fit appropriately, allowing for ease of movement without being excessively loose or tight. For optimal protection, wear the sweatshirt as the outermost layer or as part of a layered system with other flame-resistant garments, as dictated by your workplace safety protocols.
Ensure all buttons are fastened to maintain the garment's protective integrity.
3. Operating Instructions (Wearing for Protection)
The FR02 sweatshirt is designed to be worn in environments where flame resistance is required. Once donned, ensure that the sleeves cover the wrists and that the shirt is tucked in or overlaps with other flame-resistant trousers to prevent exposure of skin. Avoid rolling up sleeves or altering the garment in any way that could compromise its protective properties.
Always inspect the garment before each use for any signs of wear, tear, or damage that could reduce its protective capabilities. If damage is found, the garment should be removed from service and replaced or repaired by a qualified professional.
4. Maintenance and Care
Proper care is essential to maintain the flame-resistant properties and longevity of your Portwest FR02 sweatshirt. Follow these instructions carefully:
- Maximum Wash Temperature: 40°C (104°F), normal process.
- Bleaching: Do not bleach.
- Tumble Drying: Do not tumble dry.
- Drying: Line dry.
- Ironing: Iron at a maximum sole plate temperature of 110°C (230°F).
- Dry Cleaning: Do not dry clean.
Adhering to these care instructions will help preserve the garment's protective qualities and extend its service life.
5. Troubleshooting
Issue: Garment feels too tight or too loose.
- Solution: Ensure you have selected the correct size according to Portwest's sizing chart. Some users have reported that these shirts may run small; consider ordering one size larger if a looser fit is desired. A proper fit is crucial for comfort and effective protection.
Issue: Garment appears to have shrunk after washing.
- Solution: Verify that all care instructions (Section 4) were followed precisely, especially regarding wash temperature and drying methods. High heat during washing or drying can cause cotton garments to shrink. Avoid tumble drying and always line dry.
Issue: Wristbands are too tight.
- Solution: The wristbands are designed to be snug for protection. If they are uncomfortably tight, ensure the overall garment size is correct. If the issue persists, this may be a design characteristic.
6. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 18 x 13 x 26 inches |
| Item Model Number | FR02KHRS |
| Weight | 3.52 ounces |
| Department | Mens |
| Manufacturer | Portwest -Industrial |
| Material | Bizflame Knit: 100% Cotton 237g (or 99% Cotton, 1% Carbon Fiber option) |
7. Standards and Certifications
This garment meets the following industry standards for flame resistance:
- ASTM F1959/F1959M-12: ATPV 12 CAL/CM2 (HAF = 80.8%).
- EN ISO 11612: (A1+A2, B1, C1, F1).
These certifications ensure the product's compliance with recognized safety requirements for protective clothing against heat and flame.
8. Warranty Information
Portwest products are manufactured to high standards. For specific warranty details regarding your FR02 Bizflame Flame Resistant Henley Long Sleeve Sweatshirt, please refer to the official Portwest website or contact Portwest customer support directly. Keep your proof of purchase for any warranty claims.
9. Support and Contact
For further assistance, questions, or to report any issues with your Portwest FR02 Bizflame Flame Resistant Henley Long Sleeve Sweatshirt, please contact Portwest customer service. You can find contact information and additional resources on the official Portwest website or by visiting the Portwest Store on Amazon.
