Sonneman Tubo Slim LED Linear Vanity Light Fixture

Introduction

Thank you for choosing the Sonneman Tubo Slim LED Linear Vanity Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Important Safety Information

• Always turn off the main power supply at the circuit breaker before installing, servicing, or cleaning the fixture.
• Consult a qualified electrician if you are unsure about the installation process.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
• Do not attempt to alter the fixture in any way. Any alterations may void the warranty and create a safety hazard.
• Handle the fixture with care to avoid damage to the LED components or glass shade.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please check your local laws before purchasing this product.

Package Contents

Verify that all components are present before beginning installation:

• Tubo Slim LED Linear Vanity Light Fixture (with integrated LED bulb)
• Mounting Bracket
• Mounting Hardware (screws, wire nuts)
• Instruction Manual

Image: The Sonneman Tubo Slim LED Linear Vanity Light Fixture in polished chrome with spine trim.

Setup and Installation

Professional installation is recommended. Ensure power is OFF at the circuit breaker before proceeding.

1. Prepare the Installation Area: Turn off power at the main circuit breaker. Ensure the wall surface is clean, dry, and structurally sound to support the fixture.
2. Mount the Bracket: Secure the mounting bracket to the junction box in the wall using the provided screws. Ensure the bracket is level and firmly attached.
3. Make Electrical Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
4. Attach the Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Do not overtighten.
5. Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.

Image: Two Tubo Slim fixtures installed above vanity mirrors in a modern bathroom setting.

Operating Instructions

The Tubo Slim LED Linear Vanity Light Fixture is designed for ease of use.

• Turning On/Off: Operate the fixture using a standard wall switch connected to the electrical circuit.
• Dimming Function: This fixture is dimmable. To utilize the dimming feature, ensure it is connected to a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for proper operation.
• Remote Control: The fixture supports remote control operation. If a remote control system is installed, refer to the remote control's specific instructions for pairing and use.

Maintenance

Regular cleaning will help maintain the appearance and performance of your light fixture.

• Cleaning: Before cleaning, ensure the power supply to the fixture is turned off. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
• LED Care: The integrated LED light source is designed for long-lasting performance and does not require replacement. Do not attempt to disassemble the LED module.

Troubleshooting

If you encounter issues with your fixture, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact customer support.

Specifications

Warranty Information

Sonneman provides the following warranty for this product:

• 5-Year Limited Warranty: Applies to the integrated LED lighting technology.
• 1-Year Limited Warranty: Applies to other components of the fixture.

This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Sonneman website or contact customer support.

Customer Support

If you have any questions, require assistance with installation, or need to report a defect, please contact Sonneman customer support. Have your model number (2431.01-ST) ready when contacting support.

For more information, visit the official Sonneman website: Sonneman Store on Amazon