Progress Lighting Inspire Collection Six-Light Chandelier

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Inspire Collection Six-Light Chandelier, Model P4739-09. This elegant fixture, featuring a brushed nickel finish and off-white linen shades, is designed to enhance transitional settings in dining rooms, great rooms, or similar spaces. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Image: The Inspire Collection Six-Light Chandelier, showcasing its brushed nickel finish and six off-white linen shades.

Safety Information

WARNING: To avoid electric shock, ensure power is turned off at the main circuit breaker before beginning installation or performing any maintenance. All wiring connections must be made in accordance with local electrical codes and the National Electrical Code (NEC).

• This fixture must be installed by a qualified electrician or a person familiar with its construction and operation and the hazards involved.
• Always use caution when handling glass components. Glass is fragile and can break, causing injury.
• Do not exceed the maximum wattage specified for the bulbs (60W max per bulb).
• Ensure all connections are secure and properly insulated.
• Keep flammable materials away from the light fixture.
• This product is designed for dry location use only. Do not install in damp or wet locations.
• If any special control devices are used with this fixture, follow their instructions carefully to assure full compliance with NEC requirements.

Package Contents

Carefully unpack all components and inspect for any damage. Retain all packaging materials until you are certain all parts are present and in good condition. Refer to the assembly diagram for identification of parts.

• Fixture Body with Arms and Sockets
• Off-White Linen Shades (6 pieces)
• Mounting Strap for Outlet Box
• Canopy
• Chain (72 inches of 9 gauge chain supplied)
• Stem/Downrod
• Mounting Hardware (screws, nuts, washers)
• Wire Nuts

Image: Detailed assembly and installation diagram, showing all components and their arrangement for models 4632, 4635, 4638, and 4739.

Setup and Installation

Before installation, ensure the power is OFF at the circuit breaker. This fixture is designed for ceiling chain mounting.

1. Prepare the Mounting Location: Ensure your electrical box is securely mounted and capable of supporting the weight of the fixture. The canopy covers a standard 4" hexagonal recessed outlet box.
2. Install Mounting Strap: Attach the mounting strap to the outlet box using the provided screws.
3. Assemble Fixture Arms: If the arms are not pre-assembled, carefully attach them to the central body as indicated in the assembly diagram. For model #4739, adjust arms if required, as shown in diagram A.
4. Determine Chain Length: Decide on the desired hanging height for your chandelier. The fixture comes with 72 inches of 9 gauge chain. Adjust the chain length by removing links as needed.
5. Wire the Fixture:
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
   • Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the outlet box, or to the green ground screw on the mounting strap.
   • Ensure all wire connections are secure and tucked neatly into the outlet box.
6. Attach Canopy: Slide the canopy up the chain and secure it to the mounting strap, covering the outlet box.
7. Install Shades: Carefully place the off-white linen shades onto each of the six light bases.
8. Install Bulbs: Screw in six medium base bulbs (not included) into the sockets. Do not exceed 60W per bulb. LED, CFL, halogen, or incandescent bulbs are compatible.

Placement Guidelines

Consider the following guidelines for optimal placement and visual appeal:

Image: Dimensional drawing of the chandelier, indicating a width of 30 inches and a height of 22 inches.

Image: Recommended placement for a chandelier over a dining table, suggesting a height of 30-34 inches above the table and a width of 32-48 inches (or table width minus 12 inches).

Image: Guidelines for placing pendant lights over a kitchen island, indicating 24-inch spacing between fixtures and 12 inches from the ends of the island, with a height of 30-36 inches above the counter.

Image: Recommended hanging height for a chandelier in a stairwell, illustrating how to calculate appropriate chain/stem length based on ceiling height to ensure adequate clearance.

Operating Instructions

Once installed and wired correctly, the chandelier operates like any standard light fixture. Turn the light on or off using the wall switch connected to the fixture's circuit.

This fixture is fully dimmable when used with dimmable bulbs and a compatible dimmer switch (sold separately). Ensure that the bulbs you choose are rated for dimming if you intend to use this feature.

Maintenance

To maintain the appearance and longevity of your chandelier, follow these simple maintenance steps:

• Cleaning: Always turn off the power to the fixture and allow it to cool before cleaning. Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. For the fabric shades, gently dust with a soft brush or vacuum with a brush attachment. Do not wet the shades.
• Bulb Replacement: Ensure the power is off and the bulbs have cooled before replacing. Use only medium base bulbs (E26) with a maximum wattage of 60W per bulb.
• Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

Image: A close-up view of the off-white linen shade, highlighting its texture and material.

Troubleshooting

If you experience issues with your chandelier, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact a qualified electrician or Progress Lighting customer support.

Specifications

Image: Official product data sheet for the P4739-09 Inspire Chandelier, detailing dimensions, materials, electrical, and lamping specifications.

Warranty and Support

This Progress Lighting fixture comes with a 1-year warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical assistance, replacement parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the official Progress Lighting website for the most current contact information.

No relevant official product videos were found based on the provided criteria (creator_type: "Seller").