Trailer Valet TV5X Drill Powered Dolly Mover Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation, installation, and maintenance of your Trailer Valet TV5X Drill Powered Dolly Mover. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent injury or damage.

The Trailer Valet TV5X is designed to assist in maneuvering trailers weighing up to 5,000 pounds with a tongue weight of 250 to 500 pounds. It is ideal for precise positioning of RVs, boat trailers, and cargo haulers in confined spaces.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or property damage.

• Always ensure the trailer's weight and tongue weight are within the specified limits (5,000 lbs towing capacity, 250-500 lbs tongue weight).
• The 5% push-grade capability is for pushing only. Do not pull a trailer up any incline with this mover.
• Operate the unit on paved or well-packed gravel surfaces. Avoid soft or loose surfaces such as sand, mud, or rocky terrain, as this can lead to loss of traction and control.
• Ensure the built-in brake engages automatically when the handle is down for added control.
• When using a cordless drill, ensure it is a 20 to 24-volt model and securely attached to the TVDA drill adapter.
• Always maintain a clear path of movement and be aware of your surroundings.
• Keep hands and feet clear of moving parts.
• Do not modify the product in any way. Use only genuine Trailer Valet parts and accessories.

3. Package Contents

Verify that all components are present before beginning installation:

• Trailer Valet 5X Mover Unit
• Integrated Jack
• 8-inch Mounting Bracket
• Mounting Hardware (bolts, nuts, washers)
• TVDA Drill Adapter
• Removable Hand Crank
• Stow Pin & Cotter Pin
• Security Bolt
• Foam Strap
• Instruction Manual (this document)

Figure 3.1: Included components of the Trailer Valet TV5X system.

4. Setup and Installation

The Trailer Valet TV5X is designed for easy mounting to your trailer frame.

1. Select Mounting Location: Choose a sturdy section of your trailer frame, typically near the tongue, that allows for clear operation and sufficient ground clearance.
2. Attach Mounting Bracket: Secure the 8-inch mounting bracket to the trailer frame using the provided hardware (bracket clamps and bolts). Ensure the bracket is level and tightly fastened to prevent movement during operation.
3. Install Trailer Valet Unit: Insert the Trailer Valet 5X mover unit into the mounting bracket. The unit's rotating design allows it to be stowed upright when not in use and swung down for operation.
4. Secure Unit: Use the security bolt, stow pin, and cotter pin to firmly secure the mover unit in either the operational or stowed position.
5. Hitch Ball Installation (if applicable): If your unit requires a separate hitch ball, ensure it is tightened securely to the valet assembly using an appropriate wrench.

Figure 4.1: The Trailer Valet TV5X unit ready for installation.

Figure 4.2: The Trailer Valet TV5X mounted on a boat trailer frame.

5. Operating Instructions

The Trailer Valet TV5X offers both manual and drill-powered operation.

5.1 Manual Operation

1. Ensure the unit is securely mounted and in the operational position.
2. Lower the handle to engage the wheels with the ground and disengage the brake.
3. Attach the removable hand crank to the designated shaft.
4. Turn the hand crank to move the trailer. The unit features high and low drive gears for varying resistance.
5. To stop, release the handle. The built-in brake will automatically engage when the handle is in the upright position.

Figure 5.1: Manual operation of the Trailer Valet TV5X using the hand crank.

5.2 Drill-Powered Operation

1. Ensure the unit is securely mounted and in the operational position.
2. Lower the handle to engage the wheels with the ground and disengage the brake.
3. Attach the TVDA drill adapter to a 20 to 24-volt cordless drill.
4. Insert the drill adapter into the designated shaft on the Trailer Valet unit.
5. Use the drill to power the mover. Adjust drill speed as needed for controlled movement.
6. To stop, release the drill trigger and allow the handle to return to the upright position to engage the brake.

Figure 5.2: Drill-powered operation using the TVDA adapter and a cordless drill.

5.3 Surface Recommendations

The Trailer Valet TV5X performs optimally on hard, level surfaces such as concrete or well-packed gravel. Performance may be reduced on uneven, soft, or loose surfaces. Avoid using on sand, mud, or rocky terrain.

Figure 5.3: Recommended surfaces and incline limitations for the Trailer Valet TV5X.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Trailer Valet TV5X.

• Cleaning: Clean the unit every 1 to 3 uses, especially after exposure to fresh or saltwater environments, to prevent rust and corrosion.
• Lubrication: Periodically lubricate moving parts as recommended in the Trailer Valet Maintenance Kit (TV5XMK), sold separately.
• Inspection: Regularly inspect the unit for any signs of wear, damage, or loose fasteners. Tighten any loose bolts or connections.
• Storage: When not in use, stow the unit upright to protect it from elements and accidental damage.

7. Troubleshooting

If you encounter issues with your Trailer Valet TV5X, refer to the following common problems and solutions:

If problems persist, contact customer support for assistance.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Trailer Valet website. For customer support, technical assistance, or to inquire about replacement parts, please contact Trailer Valet directly.

You can visit the Trailer Valet Store on Amazon for more information and contact options.