Fastrack Men's Analog Grey Dial Watch NR3084NM01 User Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Fastrack Men's Analog Grey Dial Watch, model NR3084NM01. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.

Figure 1: Fastrack Men's Analog Grey Dial Watch NR3084NM01, front view.

2. Product Overview

The Fastrack NR3084NM01 is an analog watch featuring a grey dial, stainless steel case, and a stainless steel band. It is powered by a quartz movement and offers water resistance up to 50 meters.

Key Components:

• Crown: Used for setting time.
• Dial: Displays hours, minutes, and seconds.
• Case: Protects the internal movement.
• Band: Secures the watch to your wrist.
• Clasp: Push Button Foldover Clasp With Safety for secure fastening.

Figure 2: Close-up view of the watch dial and crown, highlighting the time-setting mechanism.

3. Setup

3.1 Setting the Time

1. Gently pull the crown (located on the right side of the watch case) outwards to the first position.
2. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
3. Once the time is set, push the crown back into its original position to start the watch movement.

3.2 Adjusting the Band

The stainless steel band features a Push Button Foldover Clasp With Safety. For initial fitting, the band may require adjustment by a professional watchmaker to remove or add links for a comfortable fit. Ensure the clasp engages securely after wearing.

Figure 3: The Fastrack watch worn on a wrist, demonstrating typical fit.

4. Operating the Watch

Your Fastrack watch is designed for straightforward operation. Once the time is set, the quartz movement will keep accurate time. The watch is battery-powered and does not require winding.

Water Resistance

This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is not suitable for swimming, diving, or showering with hot water, as steam and temperature changes can compromise the seals.

Important: Do not operate the crown or push buttons while the watch is wet or submerged in water.

5. Maintenance

5.1 Cleaning

To maintain the appearance of your watch:

• Wipe the case and band regularly with a soft, dry cloth.
• For stainless steel bands, a slightly damp cloth can be used, followed by a dry cloth.
• Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish.

5.2 Battery Replacement

The watch is powered by 1 Lithium Polymer battery. When the watch stops or the second hand begins to skip, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

5.3 Storage

When not in use, store your watch in a cool, dry place, away from direct sunlight and extreme temperatures. The original packaging (can-shaped box) can be used for safe storage.

Figure 4: The Fastrack watch is supplied in a distinctive can-shaped packaging, suitable for storage.

6. Troubleshooting

7. Specifications

Figure 5: Watch dimensions shown in comparison to common objects, with a case diameter of 39.5mm.

8. Warranty and Support

8.1 Warranty Information

Your Fastrack watch comes with a 24-month manufacturer warranty on manufacturing defects. To avail warranty service, you must present your original purchase invoice at any authorized Titan Service Center.

Note: No physical warranty card is required; the invoice serves as proof of purchase for warranty claims.

8.2 Customer Support

For further details, service-related queries, or assistance, please contact Fastrack/Titan customer support:

• Toll-Free Number: 1800-266-0123 (Available 10 AM to 7 PM, all days of the week)
• Email: customercare@titan.co.in
• Manufacturer Address: Titan Company Ltd, 3 Sipcot Industrial Complex, Hosur - 635126