Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your XtremepowerUS 2HP In-Ground Swimming Pool Pump. This high-efficiency pump is designed for effective water circulation in inground pools, featuring a powerful 2-speed motor and robust construction.
Image: The XtremepowerUS 2HP In-Ground Swimming Pool Pump, showing the main pump unit, clear lid, and debris basket.
Safety Information
Always adhere to local electrical and plumbing codes. Installation should be performed by a qualified professional. Disconnect power before servicing the pump.
- Ensure the pump is connected to a properly grounded electrical outlet.
- Do not operate the pump if the power cord is damaged.
- Keep children and pets away from the pump during operation.
- The motor is thermally protected and sustains a maximum water temperature of 40°C (104°F).
- This product is UL listed with A/C certification, ensuring adherence to recognized safety standards.
Components and Features
The XtremepowerUS 2HP In-Ground Swimming Pool Pump includes the following key components and features:
- High-Efficiency 2HP Motor: Operates at two speeds (3,450rpm for high, 1,720rpm for low) on 230V and 60Hz, with 7.5/2.1 amps.
- Enhanced Flow Rate: Provides a transfer rate of 5850 GPH (Gallons Per Hour) and a QMax of 366 L/min (97 GPM), ensuring efficient water movement.
- Large Capacity Strainer Basket: Features a removable debris basket for easy cleaning, preventing clogs and maintaining optimal performance.
- Versatile Fittings: Equipped with 2" & 3" NPT inlet/outlet options for flexible installation.
- Durable Construction: Made with corrosion-proof polymeric materials, including fiberglass-reinforced pump components (PPGF30) and PC components for longevity.
Image: Illustrates the pump's compatibility with large pools, supporting up to 32,000 gallons.
Image: Shows the dual-speed motor with high (3,450 RPM) and low (1,720 RPM) settings.
Image: Depicts the impressive 5,820 GPH water transfer rate for fast circulation.
Image: Highlights the pump's safety and quality certifications, operating at 230V/60Hz.
Setup and Installation
Proper installation is crucial for the pump's performance and longevity. Refer to the detailed Installation Manual (PDF) available on the product page for comprehensive instructions. Below are general guidelines:
- Placement: Position the pump on a solid, level surface, as close to the pool as possible to minimize friction loss. Ensure adequate ventilation.
- Plumbing Connections: Connect the pump to your pool's plumbing system using the 2" or 3" NPT inlet/outlet fittings. Ensure all connections are watertight to prevent leaks.
- Electrical Wiring: The pump operates on 230V. Connect the electrical supply according to the wiring diagram provided on the pump's motor label and in the manual. Use copper conductors only.
Image: Detailed wiring diagram for 230V connection and the dual-speed switch settings (High/Low).
For detailed plumbing and electrical connections, consult a certified professional. The pump's compact design (27.5"L x 10.4"W x 14.3"H) allows for space-saving installation.
Image: Diagram illustrating the compact dimensions of the pump for space-saving installation.
Operating Instructions
The XtremepowerUS pool pump features a dual-speed motor for flexible operation:
- High Speed (3,450 RPM): Use for initial priming, backwashing, or when maximum water circulation is required (e.g., during heavy use or after chemical treatments).
- Low Speed (1,720 RPM): Ideal for daily filtration and energy-saving operation. This speed is quieter and consumes less power while still maintaining adequate circulation.
To switch between speeds, use the toggle switch located on the pump motor. Ensure the pump is off before changing speeds to prevent damage.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your pool pump.
- Strainer Basket Cleaning: Periodically inspect and clean the removable debris basket. Turn off the pump, release pressure, remove the clear lid, empty debris, and rinse the basket. Reinstall securely.
- Motor Ventilation: Ensure the motor's ventilation openings are clear of obstructions to prevent overheating. The motor is thermally protected, but proper airflow is essential.
- Winterization: In colder climates, follow proper winterization procedures to protect the pump from freezing temperatures. Drain all water from the pump and plumbing lines.
- Seal Inspection: Periodically check for any leaks around the pump seals. Address any leaks promptly to prevent damage to the motor.
Troubleshooting
This section addresses common issues you might encounter with your pool pump.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start or hums but does not pump. | No power, clogged impeller, motor issue. | Check circuit breaker. Disconnect power and inspect impeller for debris. Consult a professional if motor issues persist. |
| Low water flow or pressure. | Clogged strainer basket, air leak in suction line, low water level in pool, dirty filter. | Clean strainer basket. Check for air leaks in plumbing. Ensure adequate pool water level. Clean or backwash filter. |
| Pump is noisy. | Air leak, cavitation, worn bearings. | Check for air leaks. Ensure proper water flow to pump. If noise persists, professional inspection may be required. |
| Water leaking from pump. | Loose fittings, worn shaft seal, cracked housing. | Tighten fittings. Inspect and replace shaft seal if necessary. If housing is cracked, pump replacement may be required. |
Specifications
| Specification | Value |
|---|---|
| Brand | XtremepowerUS |
| Model Number | 75035 |
| Motor Horsepower | 2HP |
| Voltage | 230 Volts |
| Frequency | 60Hz |
| Amperage | 7.5/2.1 Amps |
| RPM (High/Low) | 3450/1720 RPM |
| Maximum Flow Rate | 5850 GPH (97 GPM) |
| Maximum Water Temperature | 40°C (104°F) |
| Inlet/Outlet Size | 2" & 3" NPT |
| Product Dimensions | 27.5"L x 10.4"W x 14.3"H |
| Item Weight | 38.2 Pounds |
| Material | Corrosion-proof polymeric |
| Certifications | UL listed with A/C certification |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official XtremepowerUS website. While some reviews mention a 1-year warranty, specific terms and conditions, including registration requirements, may apply. It is recommended to retain your proof of purchase and any warranty registration cards.
For additional resources, you may find the official User Manual (PDF) and Installation Manual (PDF) helpful:
