FocalTop AC Power Cable User Manual

Introduction

This manual provides essential instructions for the safe and effective use of your FocalTop AC Power Cable. Please read this guide thoroughly before installation and retain it for future reference. This power cable is designed to provide power to compatible Sansui TV models.

Setup Instructions

Follow these steps to properly connect your AC power cable to your Sansui TV:

1. Identify the TV Power Input: Locate the power input port on the back of your Sansui TV. This port is typically a two-hole, figure-8 shaped connector.
2. Connect to TV: Insert the figure-8 end of the FocalTop AC Power Cable firmly into the power input port on your Sansui TV. Ensure it is fully seated.
3. Connect to Power Outlet: Plug the two-prong end of the FocalTop AC Power Cable into a standard, grounded electrical wall outlet. Ensure the outlet is easily accessible.

This image displays the FocalTop AC Power Cable. On the left is the standard two-prong US plug, designed to connect to a wall outlet. On the right is the C7 'figure-8' connector, which plugs into the compatible Sansui TV models.

Operating Instructions

Once the power cable is securely connected to both the TV and the power outlet, your Sansui TV is ready for operation. Press the power button on your TV or remote control to turn it on.

• Safety First: Always ensure the cable is not pinched, cut, or damaged. Do not operate the TV with a damaged power cable.
• Proper Ventilation: Ensure adequate space around the TV for proper ventilation, as recommended by your TV's manufacturer.

Maintenance

To ensure the longevity and safe operation of your FocalTop AC Power Cable, observe the following maintenance guidelines:

• Cleaning: Disconnect the cable from the power outlet before cleaning. Wipe the cable with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or kinking the cable.
• Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors. If damage is found, discontinue use immediately and replace the cable.

Troubleshooting

If your Sansui TV does not power on after connecting the FocalTop AC Power Cable, consider the following:

• Check Connections: Ensure both ends of the power cable are securely plugged into the TV and the wall outlet.
• Verify Power Outlet: Test the wall outlet with another device to confirm it is supplying power.
• Inspect Cable: Visually inspect the power cable for any visible damage. If damaged, replace it with a new, compatible cable.
• TV Power Button: Ensure the TV's power button or remote control is functioning correctly.

Specifications

Warranty and Support

For any questions, technical support, or warranty information regarding your FocalTop AC Power Cable, please contact FocalTop customer service. Refer to your purchase documentation for specific contact details.