Calypso K5698/2 Digital Unisex Watch Instruction Manual

Introduction

Welcome to your new Calypso K5698/2 Digital Watch. This manual provides essential information for setting up, operating, and maintaining your watch. This sporty and trendy digital multifunction watch features 10 ATM water resistance and a durable plastic strap.

Initial Setup

Battery

Your watch comes with one product-specific battery included. No initial battery installation is required.

Time and Date Setting

To set the time and date, locate the mode and adjustment buttons on the side of your watch. The exact button labels may vary, but typically involve 'MODE', 'SET', 'ADJUST', 'START/STOP', and 'LIGHT'.

1. Press the MODE button repeatedly until the time setting mode is activated (usually indicated by flashing digits).
2. Use the ADJUST or SET button to select the digit you wish to change (hours, minutes, year, month, day).
3. Use the START/STOP or LIGHT button to increase the value.
4. Press MODE again to confirm and exit the setting mode.

Operating Your Watch

Chronograph (Stopwatch)

The watch features a chronograph function for measuring elapsed time.

1. Press the MODE button until "CHRONO" or "STW" appears on the display.
2. Press the START/STOP button to begin timing.
3. Press START/STOP again to pause/resume timing.
4. Press the RESET button (often the same as ADJUST or LIGHT) to reset the chronograph to zero.

Alarm Function

Set an alarm to alert you at a specific time.

1. Press the MODE button until "ALARM" appears.
2. Use the ADJUST/SET button to select the hour or minute digits.
3. Use the START/STOP button to adjust the time.
4. Press MODE to confirm.
5. To activate/deactivate the alarm, usually press a combination of buttons (e.g., ADJUST + START/STOP) while in alarm mode.

Dual Time Zone

This watch supports dual time zone indication, allowing you to view a second time zone.

1. Press the MODE button until the dual time zone display is shown (often labeled "T2" or "DUAL TIME").
2. Use the ADJUST/SET and START/STOP buttons to set the second time zone.
3. Press MODE to return to the main time display.

Care and Maintenance

Water Resistance

Your Calypso K5698/2 watch is water-resistant up to 100 meters (10 ATM). This means it is suitable for swimming and snorkeling, but not for high-impact water sports or diving.

Warning:

• Do not operate buttons underwater.
• Avoid exposing the watch to hot water or steam, as this can compromise the water resistance seals.
• Ensure the crown (if present) is fully pushed in before any water exposure.

Cleaning

Clean your watch regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.

Strap Care

The plastic strap is durable but can be cleaned with mild soap and water if needed. Rinse thoroughly and dry completely.

Troubleshooting

If you encounter issues with your watch, please refer to the following common solutions:

• Display is blank or dim: The battery may need replacement. Contact a qualified watch technician.
• Buttons are unresponsive: Ensure the watch is not in a locked mode. If the issue persists, a reset might be needed (refer to a watch technician).
• Time is incorrect: Re-set the time following the "Time and Date Setting" instructions.

For more complex issues, please contact Calypso customer support.

Product Specifications

Warranty and Support

Calypso watches are part of the Festina Group, ensuring quality and reliability.

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Calypso website.

Visit Calypso Official Website