AUNA BTS13-Tonal_SML
Auna Tonale Trumpet Speaker Instruction Manual
Model: BTS13-Tonal_SML
Introduction
Thank you for choosing the Auna Tonale Trumpet Speaker. This device combines a classic retro design with modern audio technology, offering both Bluetooth connectivity and an AUX input. This manual provides essential information for safe operation, setup, and maintenance of your speaker.
Safety Instructions
- Read all instructions carefully before use.
- Keep the speaker away from water, moisture, and extreme temperatures.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Use only the provided power adapter.
- Ensure proper ventilation around the speaker.
- Avoid placing the speaker on unstable surfaces.
Package Contents
Please check that all items are present and in good condition:
- Auna Tonale Trumpet Speaker
- DC 9V Power Adapter
- Instruction Manual (this document)
Product Overview
Familiarize yourself with the components of your Auna Tonale Trumpet Speaker.
- Trumpet Speaker: The main audio output component.
- Wooden Base: Houses the electronics and provides stability.
- Multifunction Control Knob: Used for power, volume, and playback control. (See Figure 2)
- Rear Panel Connections: Includes power input, AUX input, and power switch. (See Figure 3)
- Anti-slip Rubber Pads: Located on the bottom of the base for stability and surface protection.
Setup
- Unpacking: Carefully remove the speaker and all accessories from the packaging. Retain the packaging for future transport or storage.
- Placement: Place the speaker on a stable, flat surface. Ensure there is adequate space around the unit for proper ventilation.
- Power Connection: Connect the provided DC 9V power adapter to the "DC 9V" input port on the rear panel of the speaker. Plug the adapter into a suitable power outlet.
- Power On: Flip the power switch located on the rear panel to the "ON" position. The Bluetooth LED will illuminate, indicating the speaker is powered on and ready for connection.
Operating Instructions
Bluetooth Mode
The Auna Tonale speaker is equipped with Bluetooth 3.0 for wireless audio streaming up to 10 meters.
- Power On: Ensure the speaker is powered on (refer to "Setup" section). The Bluetooth LED on the rear panel will blink, indicating it's in pairing mode.
- Enable Bluetooth: On your smartphone, tablet, or computer, enable Bluetooth and search for available devices.
- Pairing: Select "Auna Tonale" from the list of devices. Once connected, the Bluetooth LED will stop blinking and remain solid.
- Playback Control:
- Play/Pause: Press the multifunction control knob once.
- Volume Up: Rotate the multifunction control knob clockwise.
- Volume Down: Rotate the multifunction control knob counter-clockwise.
- Note: A triple acoustic signal will sound when the maximum volume is reached.
AUX Input Mode
Connect external audio devices such as MP3 players, CD players, or mobile phones using a 3.5mm audio cable (not included).
- Connect Cable: Insert one end of a 3.5mm audio cable into the AUX input port on the rear panel of the speaker.
- Connect Device: Insert the other end of the audio cable into the headphone jack or audio output of your external device.
- Audio Playback: Play audio from your external device. The speaker will automatically switch to AUX mode when a cable is detected.
- Volume Control: Adjust the volume using the multifunction control knob on the speaker or directly on your connected device.
Maintenance
- Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, preferably in its original packaging.
- Avoid Liquids: Prevent liquids from entering the speaker's openings.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected or faulty outlet. | Ensure power adapter is securely connected and the power switch is ON. Test the outlet with another device. |
| No sound (Bluetooth) | Speaker not paired, volume too low, or incorrect audio source. | Ensure Bluetooth is connected (solid LED). Increase volume on both speaker and source device. Check if another device is connected via AUX. |
| No sound (AUX) | AUX cable not connected properly, volume too low, or faulty cable. | Ensure AUX cable is fully inserted into both devices. Increase volume on both speaker and source device. Try a different AUX cable. |
| Bluetooth connection unstable | Device too far from speaker, interference, or low battery on source device. | Move the source device closer to the speaker (within 10m). Avoid obstacles. Charge your source device. |
Specifications
| Model Name: | Tonal |
| Model Number: | BTS13-Tonal_SML |
| Brand: | AUNA |
| Connectivity: | Bluetooth 3.0, 3.5mm AUX Input |
| Bluetooth Range: | Up to 10 meters |
| Max Output Power: | 25 Watts |
| Audio Output Mode: | Stereo |
| Power Supply: | DC 9V (adapter included) |
| Material: | Wood (base), Powder-coated aluminum (trumpet) |
| Color: | Black |
| Dimensions (W x H x D): | 19.5 x 68 x 25.5 cm (approximate, height varies) |
| Trumpet Diameter: | 38 cm |
| Weight: | Approx. 3.6 kg |
Warranty and Support
This product comes with a limited warranty. For detailed warranty information or technical support, please refer to the warranty card included with your purchase or visit the official AUNA website. Please have your model number (BTS13-Tonal_SML) and purchase date ready when contacting support.
Manufacturer: AUNA
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.