Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Nerf Zombie Strike Brainsaw Blaster. Please read this manual thoroughly before use to ensure proper function and safety.

Image: The Nerf Zombie Strike Brainsaw Blaster, showcasing its green and orange design with a saw blade at the front.
What's Included
The Nerf Zombie Strike Brainsaw Blaster package contains the following components:
- 1x Nerf Zombie Strike Brainsaw Blaster
- 1x Blaster Handle
- 8x Zombie Strike Darts
- Instruction Manual

Image: The Nerf Zombie Strike Brainsaw Blaster positioned in front of its brown cardboard packaging box.
Setup
Follow these steps to prepare your blaster for use:
- Unpack Components: Carefully remove all items from the packaging.
- Attach Handle: Securely attach the blaster handle to the designated slot on the blaster.
- Load Darts: Insert the 8 Zombie Strike darts into the dart storage slots on the side of the blaster.

Image: A close-up of hands inserting a green foam dart into the side of the Nerf Brainsaw Blaster.
Operating Instructions
Firing Darts
- Prime the Blaster: Pull back the priming mechanism located on the top of the blaster until it clicks into place.
- Load a Dart: Insert one Zombie Strike dart into the barrel at the front of the blaster.
- Aim: Point the blaster in a safe direction, away from eyes and faces.
- Fire: Pull the trigger to launch the dart.
Activating the Spinning Saw Blade
The Brainsaw Blaster features a manual spinning foam saw blade for close-quarters action.
- Locate the Pull String: Identify the pull string mechanism on the side of the blaster.
- Activate Blade: Pull the string firmly to make the foam saw blade spin. Release the string to stop the spinning action.

Image: A close-up of hands pulling the orange string on the Nerf Brainsaw Blaster to engage the saw blade.
Official Product Video
Video: This video demonstrates the features and operation of the Nerf Zombie Strike Brainsaw Blaster, including dart firing and the spinning saw blade mechanism.
Maintenance
- Cleaning: Wipe the blaster with a dry or slightly damp cloth to remove dust and debris. Do not submerge the blaster in water.
- Dart Care: Use only official Nerf Zombie Strike darts. Inspect darts regularly for damage and replace worn darts to ensure optimal performance.
- Storage: Store the blaster and darts in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dart does not fire or jams. | Dart is damaged or improperly loaded. Priming mechanism not fully engaged. | Ensure dart is fully inserted and undamaged. Pull the priming mechanism back completely until it clicks. |
| Saw blade does not spin or spins slowly. | Pull string not pulled firmly enough. Obstruction in the blade mechanism. | Pull the string with a quick, firm motion. Check for any foreign objects obstructing the blade and carefully remove them. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | B3569F07 |
| Product Dimensions | 4.33 x 9.33 x 26.33 inches |
| Item Weight | 2.99 pounds |
| Recommended Age | 8 years and up |
| Batteries Required | 2 AA batteries (included) |
| Manufacturer | Hasbro |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided by Hasbro, the manufacturer, on their official website or product packaging. Keep your purchase receipt for warranty claims.





