Introduction
This manual provides essential instructions for the safe and effective use of your Nerf N-Strike Elite Dual-Strike Blaster. Please read all instructions carefully before operating the blaster. Retain this manual for future reference.
Safety Information
- WARNING: Do not aim at eyes or face.
- Use only official Nerf darts. Other darts may not meet safety standards.
- Do not modify darts or blaster.
- Recommended for ages 8 and up.
Package Contents
Verify that all items are present in your package:
- 1x Nerf N-Strike Elite Dual-Strike Blaster
- 3x Nerf Elite Darts
- 3x Nerf Mega Darts
If any items are missing or damaged, please contact customer support.
Setup
Loading Darts
The Dual-Strike blaster is designed to fire two types of darts: Elite darts and Mega darts. Each type loads into specific barrels.
- Loading Elite Darts: Insert one Nerf Elite dart into each of the top three orange barrels. Push the dart in until it is fully seated.
Image: Loading an Elite dart into the top barrel.
- Loading Mega Darts: Insert one Nerf Mega dart into each of the bottom three red barrels. Push the dart in until it is fully seated.
Image: Loading a Mega dart into the bottom barrel.
Operating the Blaster
Priming the Blaster
To prepare the blaster for firing, pull the orange priming handle located at the back of the blaster all the way back until it clicks into place. This action cocks the internal mechanism.
Selecting Dart Type
The Dual-Strike blaster features a selector switch to choose between firing Elite darts or Mega darts.
- Locate the orange selector switch on the side of the blaster, labeled 'ELITE' and 'MEGA'.
Image: Locating the dart selector switch.
- Slide the switch to the 'ELITE' position to fire the top three Elite darts.
- Slide the switch to the 'MEGA' position to fire the bottom three Mega darts.
Image: Operating the dart selector switch.
Firing the Blaster
Once darts are loaded and the blaster is primed, and the desired dart type is selected:
- Aim the blaster at a safe target, away from eyes and face.
- Pull the trigger to fire one dart. The blaster will automatically rotate to the next loaded barrel of the selected dart type.
Image: A person holding the blaster, ready to fire.
Maintenance
Cleaning
To maintain your blaster, wipe it with a damp cloth as needed. Do not submerge the blaster in water or use harsh cleaning chemicals.
Dart Care
Inspect darts regularly for damage. Discard any darts that are torn, bent, or otherwise compromised, as they may affect blaster performance or safety. Store darts in a clean, dry place.
Troubleshooting
- Dart not firing: Ensure the blaster is fully primed by pulling the priming handle all the way back until it clicks. Check that the dart is fully inserted into the barrel.
- Darts jamming: Use only official Nerf darts. Ensure darts are not damaged or wet. Do not attempt to force darts into barrels.
- Selector switch not moving: Ensure no debris is obstructing the switch. Do not force the switch.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 2.33 x 7.33 x 15.33 inches |
| Item Weight | 1.1 pounds |
| Item Model Number | B4619F07 |
| Manufacturer Recommended Age | 8 years and up |
| Manufacturer | Hasbro |
Warranty and Support
Warranty Information
This product is covered by the manufacturer's standard warranty. For details regarding warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Hasbro website.
Customer Support
For further assistance, questions, or to report issues, please contact Hasbro customer support. Contact information can typically be found on the product packaging or their official website.
