1. Introduction
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Moen WS84667BRB Two-Handle High Arc Bathroom Faucet. Designed for durability and ease of use, this faucet features a Mediterranean Bronze finish and a two-handle lever design for precise control over water temperature and flow. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.
Image 1.1: The Moen WS84667BRB Two-Handle High Arc Bathroom Faucet. This image displays the faucet's high arc spout, two lever handles, and Mediterranean Bronze finish, designed for a 4-inch centerset installation.
2. Safety Information
- Always turn off the main water supply before installing or servicing the faucet.
- Wear appropriate personal protective equipment, such as safety glasses, during installation.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Ensure all connections are secure to prevent leaks.
- Do not overtighten connections, as this may damage the product.
3. Package Contents
Verify that all components are present before beginning installation. The package typically includes:
- Moen WS84667BRB Bathroom Faucet Assembly (including spout and handles)
- Mounting Hardware
- Drain Assembly (if included with your specific model)
- Installation Instructions
4. Setup and Installation
The Moen WS84667BRB faucet is designed for a 4-inch centerset installation, making it suitable for many standard bathroom sinks. Follow these general steps for installation:
- Prepare the Sink Area: Turn off the water supply to the sink. Remove any existing faucet and clean the sink surface thoroughly.
- Install the Faucet: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware. Ensure the faucet is centered and stable.
- Connect Water Supply Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet. Connect the other ends to your hot and cold water supply valves. Hand-tighten, then use a wrench for a quarter turn, being careful not to overtighten.
- Install the Drain Assembly: If your model includes a drain assembly, follow its specific instructions for installation into the sink drain hole. Connect the lift rod (if applicable) to the faucet mechanism.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. Operate the faucet handles to ensure proper water flow and temperature mixing.
Image 4.1: The Moen WS84667BRB Faucet installed on a bathroom countertop with a sink. This image illustrates the faucet's appearance in a typical bathroom setting, highlighting its high arc design and Mediterranean Bronze finish.
5. Operating Instructions
The Moen WS84667BRB faucet features two lever handles for independent control of hot and cold water.
- Cold Water: Turn the right lever handle counter-clockwise to activate cold water flow.
- Hot Water: Turn the left lever handle counter-clockwise to activate hot water flow.
- Temperature Control: Adjust both handles to achieve the desired water temperature.
- Flow Control: The further the handles are turned, the greater the water flow. The faucet provides an aerated flow, which is efficient for daily tasks like hand washing and brushing teeth, meeting EPA WaterSense criteria for water conservation.
6. Maintenance
Proper care will help maintain the finish and performance of your Moen faucet.
- Cleaning the Finish: Clean the Mediterranean Bronze finish with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the finish.
- Aerator Maintenance: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the tip of the spout, clean any debris, and rinse thoroughly before reattaching.
- Cartridge Replacement: Over time, if leaks occur from the handles or the faucet drips, the internal cartridges may need replacement. Refer to Moen's official website or contact customer support for specific cartridge replacement instructions for model WS84667BRB.
7. Troubleshooting
Refer to the table below for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Faucet leaks from spout | Worn cartridge or O-rings | Replace cartridges or O-rings. |
| Low water flow | Clogged aerator or partially closed supply valves | Clean aerator. Ensure supply valves are fully open. |
| Water leaks from base of faucet | Loose mounting nuts or improper seal | Tighten mounting nuts. Check for proper gasket placement. |
| Handles are stiff or difficult to turn | Mineral buildup or worn cartridge | Clean around handles. Replace cartridges if necessary. |
8. Specifications
Key specifications for the Moen WS84667BRB Bathroom Faucet:
- Brand: Moen
- Model Name: Caldwell
- Part Number: WS84667BRB
- Color: Mediterranean Bronze
- Finish Type: Bronze
- Material: Brass (Handle Material), Bronze (Faucet Body)
- Number of Handles: 2
- Mounting Type: Deck Mount
- Installation Type: Centerset (4 inch)
- Spout Design: High Arc
- Spout Reach: 5.63 Inches
- Maximum Flow Rate: 1.5 Gallons Per Minute (WaterSense Certified)
- Item Weight: 3.2 Pounds
- Product Dimensions: 4.75"D x 9.25"W x 7"H
- Special Feature: Dual Function Sprayer (Aerated Flow)
- Certification: WaterSense, ADA Compliant
- UPC: 026508262344
9. Warranty and Support
The Moen WS84667BRB faucet comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your product or visit the official Moen website.
For technical assistance, replacement parts, or any questions not covered in this manual, please contact Moen Customer Service. Contact information can typically be found on the Moen website or on the product packaging.
