1. Introduction
This manual provides essential information for the proper installation, use, and maintenance of your SECOND SKIN Madras 01 Clear Case. This case is specifically designed to protect the HTC Desire EYE M910x smartphone from scratches and minor impacts. Please read these instructions carefully before use.
Figure 1: SECOND SKIN Madras 01 Clear Case. This image displays the transparent case with a subtle Madras check pattern, designed to fit the HTC Desire EYE M910x smartphone.
2. Setup and Installation
Follow these steps to correctly install the case onto your HTC Desire EYE M910x smartphone:
- Prepare your device: Ensure your HTC Desire EYE M910x smartphone is clean and free of dust or debris.
- Align the case: Hold the case with the camera cutout aligned with your phone's camera.
- Insert one side: Gently slide one side of your phone into the case, starting with either the top or bottom edge.
- Snap into place: Carefully press the remaining edges of the phone into the case until it securely snaps into place. Ensure all corners are fully seated within the case.
- Verify fit: Check that all buttons, ports, and the camera are accessible and not obstructed by the case.
3. Operating and Usage
The SECOND SKIN Madras 01 Clear Case is designed for daily use, providing protection while maintaining full functionality of your HTC Desire EYE M910x smartphone.
- Button Access: The case features precise cutouts and covers for volume and power buttons, allowing for normal operation.
- Port Access: All essential ports, including the charging port and headphone jack, are accessible without removing the case.
- Charging: The phone can be charged with the case attached using a standard charging cable. Note: This case is not compatible with desktop-type chargers.
- Camera Functionality: The camera cutout ensures unobstructed use of your phone's camera and flash.
4. Maintenance and Care
To ensure the longevity and appearance of your SECOND SKIN Madras 01 Clear Case, follow these care instructions:
- Cleaning: Use a soft, damp cloth to wipe the case clean. Avoid abrasive cleaners or solvents, as these may damage the polycarbonate material or the UV hardening ink finish.
- Storage: When not in use, store the case in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Handling: While the case provides protection, avoid exposing it to extreme temperatures, sharp objects, or excessive force.
5. Troubleshooting
If you encounter any issues with your SECOND SKIN Madras 01 Clear Case, consider the following:
- Case does not fit: Ensure that your smartphone is an HTC Desire EYE M910x. This case is specifically designed for this model.
- Buttons are stiff: Gently press around the button areas to ensure the case is fully seated. If the issue persists, temporarily remove and re-install the case.
- Scratches on case: The case is designed to protect your phone from scratches. Minor scratches on the case itself are normal wear and tear and do not affect its protective function.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | MHTEYE-PCCL-298-Y710 |
| Compatible Device | HTC Desire EYE M910x / MVNO Smartphone (SIM Free Device) |
| Material | Polycarbonate |
| Treatment | UV hardening ink, top coat finish |
| Color | Clear |
| Product Dimensions (L x W x H) | 8.27 x 4.33 x 0.87 inches (21.0 x 11.0 x 2.2 cm) |
| Item Weight | 1.41 ounces (40 grams) |
| Manufacturer | SECOND SKIN |
7. Warranty and Support
For warranty information and customer support regarding your SECOND SKIN Madras 01 Clear Case, please refer to the official SECOND SKIN website or contact the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.
For general inquiries, you may visit the manufacturer's website: SECOND SKIN Official Information
