1. Introduction and Overview
The APC Smart-UPS SRT 3000VA 208V is an advanced Uninterruptible Power Supply (UPS) designed to provide reliable power protection for critical electronic equipment. This unit ensures high availability, scalability, and flexibility for various applications, mitigating power and voltage disruptions.
Figure 1.1: Front view of the APC Smart-UPS SRT 3000VA 208V.
Figure 1.2: APC Smart-UPS SRT On-line series overview.
Key features include:
- 3000VA / 2700W Battery backup capacity.
- Pure sine wave power output.
- Double-conversion on-line power protection.
- High online efficiency (93.7%).
- Designed for high availability and scalability.
Figure 1.3: Overview of premium power protection features.
2. Setup and Installation
The SRT series UPS offers flexible installation options, being rack/tower convertible to adapt to evolving business needs.
Figure 2.1: The UPS can be configured for both tower and rack installations.
2.1 Communication Ports and Outlets
The UPS features advanced monitoring and management capabilities with numerous outlets to power and protect sensitive devices.
- SmartSlot™ for network management / accessory card.
- 1 NEMA L6-30R outlet (switched outlet group 1).
- 2 NEMA L6-20R outlets (switched outlet group 2).
Figure 2.2: Rear view showing communication ports and power outlets.
3. Operating Instructions
3.1 Intuitive LCD Interface
The UPS is equipped with an intuitive LCD interface providing real-time status updates and multiple language options for easy navigation.
Figure 3.1: The LCD display provides real-time status and navigation.
3.2 Extended Runtime Capability
The Smart-UPS SRT supports up to 10 external battery packs, significantly extending runtime during power outages. For example, with 0 external batteries, runtime is approximately 9 minutes at half load, while with 10 external batteries, it extends to 5 hours.
Figure 3.2: Estimated battery runtime with and without external battery packs.
3.3 Live Swappable Batteries
The UPS features live swappable batteries, allowing for battery replacement without interrupting power to protected equipment, ensuring continuous operation.
Figure 3.3: Live swappable batteries allow for uninterrupted power during replacement.
3.4 Benefits of Double-conversion On-line UPS
This UPS provides double-conversion on-line power protection, offering several benefits:
- Ensures clean and uniform power to critical loads.
- Provides high protection from raw utility power, anomalies like brownouts, line noise, voltage transients, and power disruptions.
- Delivers power from batteries with zero transfer time during power disruptions, ideal for sensitive equipment.
Figure 3.4: Advantages of double-conversion on-line UPS technology.
3.5 PowerChute Network Shutdown Software
For comprehensive power protection of your physical and virtual IT environment, the UPS integrates with PowerChute™ Network Shutdown Software. This software enables unattended, graceful shutdown, automated start-up, and ease of use for hyperconverged infrastructure, virtual machines, and hosts and cluster services.
Figure 3.5: PowerChute Network Shutdown Software interface.
4. Maintenance
4.1 Intelligent Battery Management
The UPS incorporates intelligent battery management features to optimize battery life and ensure readiness:
- Battery replacement recommendations.
- Temperature-compensated charging.
- Periodic battery self-test.
- Disconnect battery notifications.
Figure 4.1: Key aspects of intelligent battery management.
5. Troubleshooting
This section provides general guidance for common issues. For detailed troubleshooting steps, refer to the official user guide or contact APC technical support.
- No Power: Ensure the UPS is properly connected to a live power outlet and the power switch is in the 'On' position. Check circuit breakers.
- Battery Not Charging: Verify the battery is correctly installed. If the issue persists, the battery may need replacement.
- Overload Alarm: Reduce the connected load to within the UPS's capacity. Disconnect non-essential equipment.
- Unusual Noises: If the UPS emits unusual noises, disconnect it from power and connected devices, then contact support.
6. Specifications
| Attribute | Value |
|---|---|
| Brand | APC |
| Model Number | SRT3000XLT |
| Capacity | 3000VA / 2700W |
| Input Voltage | 208V |
| Output Voltage | 96 Volts (internal battery system) |
| Item Weight | 69 pounds |
| Product Dimensions (LxWxH) | 35 x 23.75 x 9.5 inches |
| Color | Black |
| Battery Type | Sealed Lead Acid |
| Number of USB 2.0 Ports | 1 |
| First Available Date | November 12, 2015 |
7. Warranty and Support
For detailed warranty information, please refer to the documentation included with your product or visit the official APC website. For technical assistance, customer support is available.
An official User Guide in PDF format is available for download: Download User Guide (PDF)
For further assistance, you may contact APC customer support through their official channels.
