Boppy Shopping Cart Cover User Manual

Introduction

The Boppy Shopping Cart Cover provides a comfortable and clean environment for your baby while using public shopping carts. Designed for babies aged 6 to 48 months, this cover offers 360-degree coverage, a secure safety harness, and a convenient toy tether to keep your little one entertained and protected.

Image: The Boppy Shopping Cart Cover in Sunshine pattern, fully installed on a standard metal shopping cart, viewed from the front.

Setup

1. Unfold the Cover: Remove the Boppy Shopping Cart Cover from its storage pouch and fully unfold it.
2. Position on Cart: Place the cover over the child seat area of a standard shopping cart. The elastic corners are designed for easy, one-hand placement. Ensure the cover fully drapes over the cart's handle and sides, providing 360-degree coverage.
3. Secure the Cover: Adjust the cover so it fits snugly around the cart's child seat. The elastic edges will help keep it in place.

Image: An overhead view of the Boppy Shopping Cart Cover, highlighting its soft all-around coverage, 2-point safety belt, SlideLine toy tether with included toy, and machine wash & dry compatibility.

Operating Instructions

1. Placing Your Baby: Once the cover is securely in place, gently place your baby into the covered seat area. The cover provides extra cushioning in the leg holes for comfort.
2. Secure the Safety Harness: Fasten the 2-point safety belt around your baby. Adjust the straps to ensure a snug and secure fit. Always ensure your baby is properly buckled in before moving the cart.
3. Utilize the Toy Tether: Attach your baby's favorite toys or the included toy to the SlideLine toy loop located along the front of the cover. This keeps toys within reach and prevents them from falling onto the floor.

Image: A baby seated in a shopping cart, protected by the Boppy Shopping Cart Cover, demonstrating the protective barrier and comfortable leg cushioning.

Image: A close-up view of the patented SlideLine toy tether, showing how toys can be attached to keep them from falling to the floor.

Maintenance

Cleaning Instructions:

• Machine Wash: Machine wash the cover with mild detergent on a delicate cycle at 30°C (65-85°F).
• Do Not Bleach: Avoid using bleach.
• Drying: Drip dry the cover by hanging it in the shade. Do not squeeze.
• Ironing: Do not iron.
• Dry Cleaning: Do not dry clean.
• Toys: Spot clean toys only and air dry them.

Storage:

When not in use, fold the cover neatly and store it in a clean, dry place. The compact design allows for easy storage in a diaper bag or car.

Troubleshooting

• Cover Does Not Fit Snugly: Ensure the cover is properly aligned with the cart's child seat. The elastic edges are designed to stretch and conform to most standard shopping carts. Adjust the cover until it is taut.
• Safety Harness Issues: If the safety harness is difficult to buckle or adjust, check for any twists in the straps. Ensure the buckle is free of debris. Always double-check that the harness is securely fastened and snug against your baby.
• Toy Tether Not Holding Toys: Verify that the toy's attachment loop is securely fastened to the SlideLine. Ensure the toy is not excessively heavy, which could cause it to detach.

If you encounter persistent issues not covered here, please refer to the contact information in the Support section.

Specifications

Warranty and Support

For detailed warranty information and product support, please visit the official Boppy website or contact their customer service directly. Keep your purchase receipt for any warranty claims.

Boppy Official Website: www.boppy.com