1. Introduction
This user manual provides detailed instructions for the Maketheone IR Torch 3W 850NM Infrared Night Vision Flashlight, model IR850-3W-AA. This device is an infrared (IR) illuminator designed to enhance the performance of night vision devices. It is important to understand that this is not a standard flashlight for general illumination.
The 850nm infrared light emitted by this torch is invisible to the human eye. To utilize this IR illuminator, it must be used in conjunction with night vision devices such as night vision monoculars, goggles, or non-IR filter cameras. A small, faint red glow may be visible on the LED when the torch is active, indicating operation.
2. Important Safety Information
- Invisible Light: The infrared light emitted by this device is not visible to the naked eye. Do not attempt to look directly into the LED while the device is operating, as prolonged exposure to intense IR light may be harmful.
- Battery Safety: Use only the specified battery type (1x AA). Ensure correct battery polarity during installation. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period.
- Operating Environment: This device is water-resistant, but not waterproof. Avoid submerging it in water. Do not operate in extremely high temperatures or near flammable materials.
- Children: Keep out of reach of children.
3. Package Contents
Verify that all items are present in the package:
- 1x Maketheone IR Torch (Model IR850-3W-AA)
Note: Battery is NOT included and must be purchased separately.
4. Product Overview
The Maketheone IR Torch is constructed from 6061T aircraft aluminum with a HA III hard-anodized finish, ensuring durability. It features a clear anti-reflective coating magnifying ABS lens and a 3 Watt 850nm 3-chip LED assembly.
Figure 4.1: Angled view of the Maketheone IR Torch, showing the lens and textured body.
Figure 4.2: Exploded view illustrating the main components of the IR Torch, including the lens, body, and tail cap.
Figure 4.3: Diagram showing the dimensions of the IR Torch (92mm length, 26mm diameter) and its integrated belt clip for portability.
5. Setup
5.1 Battery Installation
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert one (1) AA battery into the battery compartment with the positive (+) end facing towards the head of the flashlight.
- Screw the tail cap back on by turning it clockwise until it is securely tightened.
Ensure the battery is correctly oriented to prevent damage to the device.
6. Operating Instructions
6.1 Power On/Off
To turn the IR Torch on or off, firmly press the button located on the end cap. A faint red glow on the LED indicates that the torch is active.
Figure 6.1: The IR Torch showing the faint red glow from the LED, which confirms the device is powered on. This glow is visible to the human eye, but the emitted infrared light is not.
6.2 Adjusting the Beam (Zoom Function)
The IR Torch features a zoomable head to adjust the beam focus. Rotate the head of the flashlight to change between a focused spotlight and a wider flood effect.
- Zoom Out (Defocus): Rotating the head to zoom out provides a longer, narrower beam, ideal for illuminating distant objects.
- Zoom In (Focus): Rotating the head to zoom in provides a shorter, wider beam, suitable for broader area illumination.
Figure 6.2: Visual representation of the zoom function. Rotating the flashlight head allows adjustment between a focused beam (zoom in) and a wider beam (zoom out).
Figure 6.3: Illustrative images demonstrating the effectiveness of the Maketheone IR Torch when used with a night vision device at 2 meters, 20 meters, and 40 meters, compared to no infrared light.
7. Maintenance
- Cleaning: Wipe the exterior of the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents. Clean the lens gently with a lens cleaning cloth to avoid scratches.
- Battery Replacement: Replace the AA battery when the light output diminishes or the device fails to turn on.
- Storage: Store the IR Torch in a cool, dry place. Remove the battery if the device will not be used for an extended period to prevent battery leakage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Torch does not turn on. |
|
|
| Weak or inconsistent IR light output. |
|
|
| Cannot see the IR light. |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Model | IR850-3W-AA |
| Light Source | 3 Watt 850nm 3-chip LED assembly |
| IR Light Range | Up to 20-30 meters (dependent on NV device) |
| Material | 6061T Aircraft Aluminum, HA III hard anodized |
| Lens | Clear anti-reflective coating magnifying ABS lens |
| Lifespan | Average 10,000 hours (LED beads) |
| Mode | On - Off |
| Operating Voltage | 1.2V - 1.5V |
| Power Supply | 1 x AA battery (NOT included) |
| Runtime | 1.5 - 5.5 hours (depends on battery capacity) |
| Switch Type | End cap press on-off switch |
| Dimensions (L*D) | 92mm * 26mm (3.62"D x 1.02"W x 1.02"H) |
| Weight | 68g (2.08 ounces) |
| Water Resistance | Water Resistant |
10. Warranty and Support
Maketheone products are designed for reliability and performance. For any questions, technical support, or warranty inquiries, please contact Maketheone customer service.
Contact information can typically be found on the product packaging or the official Maketheone website. Please retain your purchase receipt for warranty purposes.
Based on product packaging information, you may contact:
- Email: makeone@outlook.com
- Website: www.make-the-one.com
- Facebook: @UKMakeThe1