SPARES2GO 850W Heating Elements for Heatstore Night Storage Heaters (Model 09-STHE-115) - Instruction Manual

1. Product Overview

These SPARES2GO 850W heating elements are designed as replacement parts for various Heatstore night storage heater models. This package includes four (4) individual heating elements, each rated at 850 watts. They are crucial components for the proper functioning of your night storage heater, ensuring efficient heat generation.

Image 1.1: A single SPARES2GO 850W heating element, showing its U-shaped design and electrical terminals.

2. Safety Information

WARNING: Installation and replacement of heating elements should only be performed by a qualified electrician or a competent person with experience in electrical appliance repair. Failure to follow these safety instructions may result in electric shock, fire, or other serious injury.

• Always disconnect the main power supply to the night storage heater before attempting any installation, maintenance, or repair work.
• Ensure the heater has completely cooled down before handling any internal components.
• Verify that the replacement elements match the specifications (wattage, dimensions) of the original elements.
• Do not operate the heater with damaged or incorrectly installed elements.
• Keep children and pets away from the appliance during installation and operation.

3. Compatibility

These 850W heating elements are compatible with the following Heatstore night storage heater models:

• HSA18, HSA24, 4290, HSA12, 4291, 4292
• HSC12, HSC18, HSC24, 4690, 4691, 4692, 4790
• HSX6N, HSX12N, HSX18N, HSX24N
• HSXDA12N, HSXDA18N, HSXDA24N
• HSXC12N, HSXC18N, HSXC24N
• HSXAF18N, HSXAF24N

Please verify your heater's model number before purchasing and installing these elements to ensure proper fit and function.

4. Installation / Setup

IMPORTANT: Due to the electrical nature of this product and the potential for serious injury, installation should only be carried out by a qualified and certified electrician or a similarly competent professional.

1. Disconnect Power: Ensure the main power supply to the night storage heater is completely disconnected at the consumer unit (fuse box) before beginning any work. Verify with a voltage tester.
2. Access Elements: Carefully remove the outer casing and any internal insulation or brickwork as per your specific heater's service manual to gain access to the existing heating elements.
3. Remove Old Elements: Disconnect the wiring from the old elements and carefully remove them from their housing. Note the orientation and wiring connections for reassembly.
4. Install New Elements: Insert the new SPARES2GO 850W heating elements into the designated slots. Ensure they are seated correctly and securely.
5. Connect Wiring: Reconnect the electrical wiring to the new elements, ensuring all connections are tight and correct according to the heater's wiring diagram.
6. Reassemble Heater: Replace any insulation, brickwork, and the outer casing, ensuring all components are correctly positioned and secured.
7. Test: Once fully reassembled, restore power to the heater and test its operation according to the heater's user manual. Monitor for any unusual smells or sounds.

Image 4.1: Dimensions of a single heating element, measuring 405mm in length and 170mm in width.

Image 4.2: A pack of four heating elements, illustrating their individual dimensions of 405mm by 170mm.

5. Operating Instructions

These heating elements are internal components of your Heatstore night storage heater. Their operation is controlled by the heater's thermostat and internal circuitry. Once correctly installed, the elements will function automatically as part of the heater's normal operation cycle, converting electrical energy into heat to warm the storage bricks.

Refer to your specific Heatstore night storage heater's user manual for detailed operating instructions, including setting temperatures, charge times, and output controls.

6. Maintenance

Heating elements generally require minimal maintenance. However, periodic checks can help ensure longevity and efficient operation:

• Annual Inspection: It is recommended to have a qualified electrician inspect your night storage heater, including the heating elements, annually. This can help identify any signs of wear or damage before they lead to a malfunction.
• Cleanliness: Ensure the internal components of the heater, including the area around the elements, are free from dust and debris. Always disconnect power before cleaning.
• Visual Check: If accessing the elements during other maintenance (with power disconnected), visually inspect them for any signs of cracking, blistering, or discoloration, which may indicate a fault.

7. Troubleshooting

If your Heatstore night storage heater is not functioning correctly after element replacement, consider the following:

• No Heat Output:
  • Check if the main power supply to the heater is on.
  • Verify that the heater's thermostat settings are correct.
  • Ensure all electrical connections to the elements are secure and correctly wired.
  • One or more elements may be faulty. A qualified electrician can test individual elements for continuity.
• Partial Heat Output:
  • This often indicates that one or more, but not all, heating elements have failed. Professional diagnosis is recommended.
• Burning Smell:
  • Immediately disconnect power. This could indicate overheating, faulty wiring, or debris inside the heater. Do not operate until inspected by a professional.

For any persistent issues or if you are unsure about troubleshooting steps, contact a qualified electrician or SPARES2GO customer support.

8. Specifications

9. Warranty and Support

Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, returns, or technical support, please contact SPARES2GO directly through their official website or customer service channels.

When contacting support, please have your product model number (09-STHE-115) and purchase details readily available.