1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your UNIC UC40 Projector. The UC40 is a portable home theater projector designed for various applications, including small classrooms, presentations, and home entertainment. It features a compact design and supports a range of input options.
Image 1.1: The UNIC UC40 Projector. This image displays the compact form factor of the projector, highlighting its lens at the front and the various connectivity ports located on the rear panel, including HDMI, USB, and AV inputs.
2. Product Features
- Native Resolution: 800x480 (RGB) with 800 lumens brightness.
- Display Technology: 0.24'' LCD, LED tricolor (RGB) projection.
- Lamp Life: LED lamp works for over 20,000 hours, providing vivid color and abundant details.
- Input Support: Multi-function input including IP/IR/USB/SD/HDMI. Supports 1080P Full HD input.
- Aspect Ratio: Picture switch form 16:9 and 4:3.
- Keystone Correction: Supported for image adjustment.
- Power Bank Function: Charge function by USB port to connect.
- Low Power Consumption: 55W low power cost, eco-oriented.
- Electronic Zoom: Easy picture size change.
- Projection Distance: From 0.3m to 3m.
- Multi-language Support: User interface available in multiple languages.
3. Setup Guide
3.1 Unpacking and Inspection
Carefully remove all components from the packaging. Verify that all items listed in the package contents are present and undamaged.
- 1x UNIC UC40 Projector
- 1x Power Adaptor
- 1x 3-in-1 AV Cable
- 1x Remote Control
- 1x User Manual (this document)
3.2 Power Connection
- Connect the power adaptor to the projector's power input port.
- Plug the power adaptor into a suitable electrical outlet.
- The power indicator light on the projector should illuminate.
3.3 Connecting Input Devices
The UC40 projector supports multiple input sources. Choose the appropriate cable for your device.
- HDMI: Connect an HDMI cable from your laptop, gaming console, or Blu-ray player to the projector's HDMI port.
- VGA: Connect a VGA cable from your computer to the projector's VGA port.
- AV: Use the provided 3-in-1 AV cable to connect to devices with composite video and stereo audio outputs.
- USB/SD Card: Insert a USB drive or SD card into the respective slots for direct media playback.
3.4 Positioning and Focus
- Place the projector on a stable, flat surface, perpendicular to the projection screen or wall.
- Adjust the projection distance (0.3m to 3m) to achieve the desired screen size.
- Rotate the focus ring on the projector lens until the image appears sharp and clear.
- Use the keystone correction dial (if available) to adjust the image shape if it appears trapezoidal.
4. Operating Instructions
4.1 Powering On/Off
- Power On: Press the power button on the projector or the remote control. The indicator light will change, and the projector lamp will turn on.
- Power Off: Press the power button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.
4.2 Input Source Selection
After powering on, use the "Source" button on the remote control or projector panel to cycle through available input sources (HDMI, VGA, AV, USB, SD). Select the input corresponding to your connected device.
4.3 Menu Navigation
Use the arrow keys and "OK" button on the remote control or projector panel to navigate the on-screen display (OSD) menu.
- Picture Settings: Adjust brightness, contrast, color, and aspect ratio (16:9 or 4:3).
- Sound Settings: Control volume. Note: An external speaker may be required for optimal audio experience.
- Time Settings: Set sleep timer.
- Option Settings: Language selection, factory reset.
4.4 Media Playback (USB/SD)
When a USB drive or SD card is inserted, the projector will typically prompt you to select the media type (Movie, Music, Photo, Text). Navigate to your desired file and press "OK" to play.
5. Maintenance
5.1 Cleaning the Lens
Use a soft, lint-free cloth specifically designed for optical lenses to gently wipe the projector lens. Avoid using abrasive cleaners or excessive force, which can scratch the lens.
5.2 Cleaning the Projector Body
Wipe the exterior of the projector with a soft, dry cloth. Do not use liquid cleaners or solvents.
5.3 Lamp Life
The LED lamp in your UC40 projector has an estimated lifespan of over 20,000 hours. No user replacement is typically required for the LED lamp itself. Ensure proper ventilation to maximize lamp life.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen. |
|
|
| Image is blurry. |
|
|
| Image is trapezoidal. |
|
|
| No sound. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | UNIC |
| Model Number | UC40 |
| Colour | White |
| Form Factor | Portable |
| Native Resolution | 800 x 480 |
| Maximum Display Resolution | 1920 x 1080 (1080p support) |
| Display Technology | LCD |
| Brightness | 800 Lumens |
| Contrast Ratio | 800:1 |
| Lamp Life | 20,000 hours (LED) |
| Minimum Image Size | 34 Inches |
| Maximum Image Size | 100 Inches |
| Projection Distance | 0.3m to 3m |
| Connectivity Technology | HDMI, USB, VGA |
| Hardware Interface Type | USB, VGA |
| Compatible Devices | Laptops, Smartphones, Gaming consoles, Blu-ray players, Media players, Tablets |
| Voltage | 240 Volts |
| Wattage | 30 Watts |
| Item Weight | 450 g |
| Product Dimensions (LxWxH) | 16.99 x 13.59 x 7.01 cm |
8. Warranty and Support
8.1 Warranty Information
The UNIC UC40 Projector comes with a 6 Month Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your purchase receipt as proof of warranty.
This warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
8.2 Legal Disclaimer
All disputes are subject to the Srinagar jurisdiction.
