Tupperware Thermo Flask User Manual

1. Introduction

The Tupperware Thermo Flask is designed to keep your beverages at their desired temperature, whether hot or cold. Its compact 400ml capacity makes it suitable for daily use, travel, or office. This flask is constructed from durable plastic and features an easy-to-use screw cap for convenient access.

Figure 1: Tupperware Thermo Flask. A vibrant pink Tupperware Thermo Flask, 400ml capacity, featuring a white screw cap and a white band below the cap. The body of the flask is adorned with various sizes of white heart-shaped patterns. The Tupperware logo is visible on the upper part of the flask.

2. Product Features

• Durable Construction: Made from high-quality plastic for long-lasting use.
• Temperature Retention: Designed to keep beverages hot or cold for extended periods.
• Convenient Capacity: 400ml volume, ideal for personal use.
• Easy to Clean: Features a design that facilitates simple cleaning.
• Secure Lid: Equipped with an easy-to-open and shut screw cap to prevent leaks.
• Aesthetic Design: Available in various colors, including a multicolor option with heart patterns.

3. Package Contents

Upon unpacking, please ensure all items are present and in good condition:

• 1 x Tupperware Thermo Flask (400ml)

4. Setup

1. Initial Cleaning: Before first use, wash the flask thoroughly with warm water and mild dish soap. Rinse completely.
2. Drying: Allow the flask to air dry completely or dry with a clean cloth.

5. Operating Instructions

5.1. For Hot Beverages

1. Pre-heat (Optional): For best results, pre-heat the flask by filling it with hot water for 5-10 minutes. Empty the water before adding your beverage.
2. Fill: Pour your hot beverage into the flask. Do not overfill; leave some space at the top for the lid.
3. Secure Lid: Tightly screw on the cap to ensure a leak-proof seal and optimal temperature retention.

5.2. For Cold Beverages

1. Pre-chill (Optional): For best results, pre-chill the flask by filling it with cold water or ice for 5-10 minutes. Empty before adding your beverage.
2. Fill: Pour your cold beverage into the flask. Do not overfill.
3. Secure Lid: Tightly screw on the cap to ensure a leak-proof seal and optimal temperature retention.

6. Maintenance and Care

• Cleaning: The flask is dishwasher safe. For hand washing, use warm water and mild detergent. Use a bottle brush for thorough cleaning if needed.
• Drying: Always ensure the flask is completely dry before storing to prevent odors or mildew.
• Storage: Store with the lid off or slightly ajar to allow air circulation.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, bleach, or chlorine-based products, as these can damage the flask's material and finish.
• Temperature Extremes: Avoid exposing the flask to extreme temperatures (e.g., freezing or direct flame) beyond its intended use.

7. Troubleshooting

• Leakage: Ensure the lid is screwed on tightly and correctly aligned. Check the lid's seal for any damage or debris.
• Poor Temperature Retention: Ensure the lid is securely closed. Pre-heating or pre-chilling the flask before use can significantly improve temperature retention.
• Odor Retention: Thoroughly wash and dry the flask after each use. For persistent odors, a mixture of baking soda and water can be used for soaking, followed by rinsing.

8. Specifications

9. Warranty and Support

Tupperware products are known for their quality and durability. While specific warranty details are not provided in this manual, Tupperware generally offers a guarantee on its products against manufacturing defects. For any support, queries, or to report issues, please contact Tupperware customer service or visit their official website. Keep your purchase receipt as proof of purchase.

For more information, you may visit the official Tupperware store on Amazon: Tupperware Store