Dolphin Advanced Power Supply Unit with Weekly Timer (Model 9995672-US-ASSY)

1. Introduction

This manual provides essential information for the safe and effective use of your Dolphin Advanced Power Supply Unit with Weekly Timer, Model 9995672-US-ASSY. This unit is a genuine replacement part designed to power compatible Dolphin robotic pool cleaners, offering advanced features including a weekly timer for automated cleaning cycles. Please read these instructions thoroughly before installation and operation.

Image: The Dolphin Advanced Power Supply Unit, a white rectangular device with a handle and control panel.

2. Important Safety Information

Always observe the following safety precautions to reduce the risk of injury, electric shock, or damage to the unit:

• Ensure the power supply is connected to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD).
• Do not operate the unit if the power cord or the unit itself is damaged.
• Keep the power supply unit away from the pool edge to prevent it from falling into the water.
• Never enter the pool while the robotic cleaner is operating or connected to the power supply.
• Disconnect the power supply from the electrical outlet before performing any maintenance or cleaning on the robotic cleaner or the power supply unit.
• This unit is designed for outdoor use but should be protected from direct sunlight and extreme weather conditions.

3. Compatible Dolphin Pool Cleaners

This Advanced Power Supply Unit (Model 9995672-US-ASSY) is compatible with the following Dolphin robotic pool cleaner models:

• Atlantis
• DX3
• DX3S
• Endeavor
• M3
• Nautilus (old models)
• Nautilus CC Plus (old models)
• Neptune
• Primal
• Quest

4. Package Contents

Your package should contain the following item:

• Dolphin Advanced Power Supply Unit with Weekly Timer (Model 9995672-US-ASSY)

Note: The robotic pool cleaner and its floating cable are sold separately and are not included with this replacement power supply unit.

5. Setup Instructions

Follow these steps to set up your Dolphin Advanced Power Supply Unit:

1. Placement: Position the power supply unit at least 12 feet (3.5 meters) from the edge of the pool. Ensure it is not exposed to direct sunlight, rain, or standing water. A shaded, dry area is ideal.
2. Connect Floating Cable: Take the floating cable from your Dolphin robotic pool cleaner and connect its plug to the power supply unit's designated port. Ensure the connection is secure.
3. Connect to Power Outlet: Plug the power supply unit's main cord into a grounded electrical outlet (100-240V AC, 50-60Hz) that is protected by a GFCI or RCD.

Image: The power supply unit with the robotic cleaner's floating cable connected to its side port, and the main power cord plugged into an outlet.

6. Operating Instructions

The Dolphin Advanced Power Supply Unit features a simple control panel for operation.

Power Button

Press the power button (⏻) to turn the unit ON or OFF. When the unit is ON, the robotic cleaner will begin its cleaning cycle according to its default settings or the weekly timer schedule.

Weekly Timer Function

The weekly timer allows you to schedule cleaning cycles automatically. Use the 'Select' button to choose your desired cleaning frequency:

• 1: The robotic cleaner will operate every day.
• 2: The robotic cleaner will operate every other day.
• 3: The robotic cleaner will operate every third day.

Once a setting is selected, the unit will remember it for the entire week. The timer will reset after 7 days, and you may need to re-select your preferred schedule.

Image: Close-up of the Dolphin Power Supply Unit's control panel, highlighting the power button and weekly timer selection.

Image: Graphic illustrating the weekly timer function and the 180W power output of the unit.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your power supply unit.

• Cleaning: Periodically wipe the exterior of the power supply unit with a damp cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
• Protection: Always ensure the unit is protected from direct water spray, rain, and excessive humidity.
• Storage: During the off-season or when not in use for extended periods, disconnect the power supply from the outlet and store it in a dry, shaded, and temperature-controlled environment.
• Cable Care: Inspect the power cord and the floating cable connection regularly for any signs of wear or damage. Replace immediately if damage is found.

8. Troubleshooting

If you encounter issues with your power supply unit, refer to the following common solutions:

9. Specifications

Image: The Dolphin Power Supply Unit shown with its approximate length, width, and height dimensions.

10. Warranty and Support

This Dolphin Genuine Replacement Part is manufactured by Maytronics and is subject to their standard warranty terms. For specific warranty details, claims, or technical support, please refer to the official Dolphin or Maytronics website, or contact their customer service directly. Always use genuine Dolphin parts for optimal performance and to maintain warranty validity.

For service and repair, visit www.maytronics.com.