Baseus SUDYZP-D1S

Baseus Bluetooth Selfie Stick with Tripod and Remote Control

Model: SUDYZP-D1S

1. Introduction

Thank you for choosing the Baseus Bluetooth Selfie Stick with Tripod. This versatile device combines an extendable selfie stick with a stable tripod and a detachable Bluetooth remote control, allowing you to capture photos and videos with ease. Please read this manual carefully before use to ensure proper operation and to maximize your product experience.

2. Product Overview

The Baseus Selfie Stick with Tripod is designed for portability and functionality. It features a compact, foldable design that extends to 810mm, a 360-degree rotatable phone holder, and a removable Bluetooth remote for convenient shooting.

Baseus Bluetooth Selfie Stick extended with a smartphone mounted, showing tripod legs deployed.

Figure 2.1: The Baseus Selfie Stick fully extended with a smartphone in tripod mode.

Baseus Bluetooth Selfie Stick in its folded, compact state, showing the integrated remote control.

Figure 2.2: The selfie stick in its compact, folded form, highlighting the remote control.

3. Safety Information

  • Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
  • Keep the device away from water and other liquids.
  • Do not attempt to disassemble or modify the device.
  • Ensure your smartphone is securely mounted before extending the stick or using the tripod.
  • Keep out of reach of children.

4. Package Contents

Verify that all items are present in your package:

  • Baseus Bluetooth Selfie Stick with Tripod (Black/Gray)
  • Detachable Bluetooth Remote Control

5. Setup

5.1 Unfolding and Extending the Selfie Stick

  1. Gently pull the top part of the stick upwards to unfold it from its compact state.
  2. Extend the telescopic rod segments to your desired length. The stick can extend up to 810mm.

5.2 Attaching Your Smartphone

  1. Open the phone clamp at the top of the stick.
  2. Carefully place your smartphone into the clamp, ensuring it is held securely. The clamp supports phones up to 6.5 inches.
  3. Adjust the phone holder's angle and rotation (360 degrees) as needed.
A smartphone securely mounted horizontally in the Baseus selfie stick clamp.

Figure 5.1: Smartphone mounted horizontally in the clamp.

A smartphone securely mounted vertically in the Baseus selfie stick clamp.

Figure 5.2: Smartphone mounted vertically in the clamp.

5.3 Bluetooth Pairing for Remote Control

  1. Remove the remote control from its slot on the selfie stick.
  2. Press and hold the button on the remote control until the indicator light starts flashing, indicating it is in pairing mode.
  3. On your smartphone, go to Bluetooth settings and search for available devices.
  4. Select "Baseus Selfie" or a similar name from the list to pair.
  5. Once paired, the indicator light on the remote will stop flashing and remain solid or turn off.

6. Operating Instructions

6.1 Using as a Selfie Stick

Hold the handle firmly and extend the stick to your desired length. Use the Bluetooth remote control to take photos or start/stop video recording.

A hand holding the Baseus selfie stick with a smartphone mounted, ready for a selfie.

Figure 6.1: Using the selfie stick in handheld mode.

A person smiling and posing while holding the extended Baseus selfie stick with a phone.

Figure 6.2: Example of a user taking a selfie with the stick.

6.2 Using as a Tripod

  1. While the stick is folded or partially extended, gently push the bottom part to deploy the tripod legs.
  2. Place the tripod on a flat, stable surface.
  3. Adjust the stick's height and phone holder's angle for optimal shooting.
  4. Use the remote control to capture photos or videos from a distance.
Close-up view of the Baseus selfie stick's tripod legs extended for stability.

Figure 6.3: Close-up of the tripod legs.

The Baseus selfie stick in tripod mode on a wooden table, with a smartphone mounted.

Figure 6.4: Selfie stick used as a tripod on a table.

The Baseus selfie stick in tripod mode on a table, with the remote control placed next to it.

Figure 6.5: Tripod setup with the remote control nearby.

7. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: When not in use, fold the selfie stick to its compact size and store it in a cool, dry place away from direct sunlight.
  • Battery: The remote control uses a small button cell battery. Replace it when the remote's performance degrades.

8. Troubleshooting

8.1 Remote Control Not Pairing

  • Ensure the remote control is charged or has a fresh battery.
  • Make sure Bluetooth is enabled on your smartphone.
  • Restart both your smartphone and the remote control (by removing and reinserting the battery if possible, or turning it off and on).
  • Clear previous Bluetooth connections on your phone and try pairing again.

8.2 Selfie Stick Instability

  • Ensure all telescopic segments are fully extended and locked into place (if applicable).
  • When using as a tripod, ensure the legs are fully deployed and placed on a flat, stable surface.
  • Verify that your smartphone is securely clamped and balanced.

9. Specifications

Model NumberSUDYZP-D1S
BrandBaseus
Compatible DevicesMobile Phones (up to 6.5 inches)
Product Weight0.3 Kilogram
Maximum Extension Length810 mm
FeaturesBluetooth Remote Control, Tripod Function, 360-Degree Rotatable Phone Holder
ColorBlack - Gray

10. Warranty and Support

This product comes with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus website.

For technical support, troubleshooting assistance, or any other inquiries, please contact Baseus customer service through their official channels. You can often find support contact information on the Baseus website or on the product packaging.

Online Support: www.baseus.com

Related Documents - SUDYZP-D1S

Preview Baseus WS-19017-1 Lovely Uniaxial Bluetooth Folding Stand Selfie Stabilizer User Manual
Comprehensive user manual for the Baseus WS-19017-1 Lovely Uniaxial Bluetooth Folding Stand Selfie Stabilizer, covering setup, operation, features, safety, and warranty information. Includes instructions for wireless pairing, remote control functions, gimbal usage, charging, and important notices.
Preview Baseus Heyo Rotation Countdown Timer Pro: User Manual & Features
Comprehensive user manual for the Baseus Heyo Rotation Countdown Timer Pro, detailing its features, settings, usage, and technical specifications. Learn how to use this versatile timer for cooking, studying, and more.
Preview Baseus Fast 15W Wireless Charging Car Holder User Manual
User manual for the Baseus Fast 15W Wireless Charging Car Holder, detailing product specifications, packing details, intelligent protection features, installation, usage, and safety precautions.
Preview Baseus SUDD000001 Wireless Car Holder User Manual
User manual for the Baseus SUDD000001 wireless car holder, providing instructions on usage, features, safety, specifications, and warranty information for this Qi-enabled car accessory.
Preview Baseus C02 Magnetic Car Phone Holder - User Manual & Specifications
Official user manual and specifications for the Baseus C02 Magnetic Car Phone Holder. Learn about product details, installation, and safety precautions for this car accessory.
Preview Baseus Gravity Air Vent Car Holder & QI Wireless Charger User Manual
Comprehensive user manual for the Baseus Gravity air vent car holder, featuring QI wireless charging technology. This guide provides detailed specifications, step-by-step installation instructions, and essential usage notes for optimal performance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.